The model was emptied-and-refilled when re-checked, which
meant we needed to have some special handling when messages
changed to avoid re-creating widgets. Since we use a model
view now, we don't need the extra machinery.
This is a rather clunky implementation of re-check requirements.
"Clunky" because the UI parts are re-created each time, rather
than fishing from a model of checked (or unchecked) requirements.
The Widgets parts should be updated to use a full model, rather
than the recreate-list-of-Widgets implementation they have now.
Unrelated changes pull in a bunch of improvements to the
waiting spinner widget.
Although this is 3rd-party code, it now diverges -- by merging the
stale PR from upstream, and from adding features of our own --
enough that we should not pretend that it is the original 3rdparty
code.
Chase a couple of include paths that called this from 3rdparty/
While here, make it possible for the "screen" (screen-size) check
to be mandatory; there's no reason it shouldn't follow the same
logic as all the others (although denying users an install because
they have a VGA monitor seems a bit weak).
Exactly one kind of setting-hostname is done, and that's
entirely independent of writing /etc/hosts. Don't make it
a set of flags, use an enum and a bool.
- _find and _each Doesn't need to be part of the class API
- Rename to *Transform() because that's more in-line with what it
does, applying an operation to the tree.
Reduce warnings by using unsigned consistently; this fights
the KPMCore API (which uses signed sizes for, e.g. sectorSize)
a little, but states more clearly that a disk cannot have a
negative size.
This is mostly a confirmation that the subsequent changes
to #1905 were correct; the "name" key set in a partition
configuration is applied to the partition.
FIXES#1904
Existing code reinitialized the layout, losing whatever
layout was set in the config. Refactor so that you can
access the partition-layout API, and change the default
FS through that -- which is the point of the code block
here in `doAutopartition()`, to look up the currently-
selected default FS.
Inspired by Santosh's work in #1903, #1759.
By default, calamares renames the label of root partition
to "root" overriding the name specified in partiton.conf
Signed-off-by: Santosh Mahto <santosh.mahto@collabora.com>
- basename() returns the last path component, so never includes
the leading '/dev/'
- the check for mmc and nvme looked for device names starting
with '/dev/mmc' .. but '/dev/' has just been stripped away
by the call to basename, so this never matched
- stripped the trailing digits rather than trailing 'p[0-9]',
so 'nvme0n1p2' became 'nvme0n1p' which isn't a useful
device name.
FIXES#1883
Don't do the actual KPM work, but pretend that they were done.
This can be useful -- independently of the existing unsafe-
options and failing partitioning entirely -- for testing
partition layouts in modules following the *partition* one.
- the length parameter to diskDescription() is worse than
useless, because it doesn't say anything about what will
be done if there's more than one disk.
If the hostname changes while the field has focus, that means
that the user is typing in the field, and we shouldn't mess
with the cursor position.
FIXES#1884
- if nothing is selected (index -1, which now shows the placeholder), the text is empty
- if something has been entered, return it (e.g. if the user is typing)
- if something is selected, the text gets set to that anyway
The warning about the mount point -- that it was in-use or
invalid -- had been separated from the drop-down by the
FSLabel field. Move it back, rename the variable for
clarity while we're at it.
- make the boxes expand, rather than stick to a minimum
size that doesn't align with other boxes in the dialog,
and which may be too small to contain the text they display.
There is a mismatch between how the configuration interprets
*initialSwapChoice* when it is not a valid choice, and how
the UI interprets it. If you e.g. do not have a *userSwapChoices*
setting at all, whatever *initialSwapChoice* is set is interpreted
by the UI as "suspend".
Avoid that by putting the choice in the configuration and
warning the user (which ought to be a warning to the distro).
FIXES#1881
- mark some TODO
- tighten up the YAML schema a little bit
- when unset, use 'quiet' rather than empty, to preserve compatibility
with existing configuration files.
SEE #1882
This is the infrastructure bit; if someone can come up with a way
of **meaningfully** detecting support, the detection function can
be given a better implementation.
FIXES#1725
- expectation derp11 was wrong, there were only 10 calls to next()
- using whole name instead of the not-the-suffix-bit was wrong
- phrase generator wrong length
It may be easiest to modify the efiBootloaderId, since that does not
normally show up in the UI. I cannot quickly come up with a way to
do the same kind of suffixing on the user-visible name.
SEE #1820
- the first time we arrive at locale, there isn't a current location
and the setCurrentLocation(...) method ends up calling setLanguage(),
usually. The second time, this call is skipped (not called from
the overloaded setCurrentLocation() which is called from onActivate),
so the language didn't update.
- now call setLanguage() unless there has been one set explicitly.
onActivate of locale updates the language only when currentLocation changed
or when onActivate of locale is called for the first time.
However, It is irrelevant solution since the language is set by the welcome.
So language should be updated always.
The language is used by keyboard module to guessing a layout of keyboard.
Once you face the locale, you can't change language in the welcome
if you don't change the timezone.
- the module is 'unpackfs', not 'unsquash'
- add a warning + specific error if there is no unpack key in the config
- the 'doing nothing' part isn't true: the module errors out instead
of doing nothing.
SEE #1870
- Use the Calamares support-functions for running lsblk and mount
(these might need to have privilege support if Cala is not
running as root, so this is future-proofing)
Most *partition* module jobs run an operation and turn that into
a JobResult -- ok if it succeeds, and with the report text otherwise.
Factor it out into a separate method that can be used as shorthand.
Put the Item class in a separate header; give it functionality
to create itself from Variants (e.g. from the configuration data)
and to run itself (do whatever the item is supposed to do).
This makes the polymorphic approach unnecessary: we just have
items that are sufficiently smart.
This moves do-a-thing to the Item, while the Job now has one
job: be a loop around creating Items and running items.
The filenames don't matter, but the contents of the file are also
UTF-8, and depending on the default encoding of the Python
interpreter, this can fail on non-ASCII characters in the
file. Set the encoding explicitly while reading and writing
the NetworkManager configuration files.
FIXES#1848
- modules with no configuration should be marked 'noconfig',
but umount is special: it has no **useful** configuration
(maybe no **non-deprecated** configuration), but isn't
marked 'noconfig' **yet**.
- this module needs work to handle BTRFS special-cases *anyway*
- limited in scope, few options: port it while doing the
special-cases
So far, this is just a C++ stub.
SEE #1659#1644
The translations apply to labels and a tooltip, which depends on
the partition-table type. Move the strings together and make
the whole range of the switch explicitly.
We want to use the KPMCore function consistently, but Calamares
uses a qint64 most of the time. Centralize the cast to double
in one place in the code.
- these are internal classes, with no real Qt machinery; remove
the Q_OBJECT macros.
- replace the tr() calls with calls with an explicit context,
so that translations do not change.
If there is no subvolume set, skip creation of that subvolume.
This allows root to be on a bare FS, without a tag or subvolume
name. To achieve this, use
subvolume: no
(no quotes there) in the YAML.
Timezones 5.0 and 5.5 have considerable overlap; clear up most
of it. Since a pixel is about 55x55km on the ground, and the
translation of latitude and longitude is sketchy at best,
accuracy on this timezone map is not very good.
FIXES#1832
- typo (canmount vs canMount)
- the canMount property is nominally a string, but YAML is 'special'
and interprets 'on' and 'off' and 'yes' and 'no' and other strings
as booleans unless quoted.
- log device node (/dev/sdb) instead of its name
- don't log job's prettyName() because that's translated, and also
contains user-visible private names (introducing a non-translated,
nicely redacted version of prettyName() seems like too much effort
for something that can be reconstructed from bits earlier in the log)
- use hex-trailer
- while here, convert DebugRow to use a copy rather than a reference,
to avoid dangling references when applied to temporaries
- convert *partition* module to use the RedactedNames
- toml.dump() takes a file-like object
- toml.loads() takes a whole string to parse, (e.g. the TOML data),
not a pathname, so change to toml.load() which takes a file-like
object.
- If the config file doesn't exist, the dictionary is empty
- If it **does** exist, it might not have key 'default_session' in it
Either case should avoid a KeyError by using get() (or setdefault,
in this context). Subsequent use of os.path.exists() is strange,
since the value is a **group** (e.g. a dictionary) in the config
file. Just check if it exists, and then fill something in.
- the (n/m) lines are output of specific steps, not actual package-
installation. So look for "<action> <packagename> ..." lines instead.
This means we keep some state around, and need extra machinery to
report those lines rather than the generic progress reporting
that reports on groups.
- during install and remove, check for (n/m) output lines which
report progress of the pacman actions and turn those into progress
reports for the *packages* module.
- remove from GS
- remove duplication across Config and ChoicePage
- improve translations (presumably "msdos or gpt" is the most
complicated it will get)
FIXES#1735
- the partition module makes a nice descriptive widget,
which includes the text it **also** has for the summary;
(the text is intended for the QML summary).
- In general, if a module has a widget for the summary, assume
that that is the **whole** summary and use it instead of text.
This resolves duplicate summaries -- showing the text of the
partitioning-step, followed by its widget -- introduced in July.
- make the installation work,
- special case because rsync can return error 23 (which throws, from
inside the Python API) which still means "it was ok".
SEE #1740
By processing each line in turn (and just counting is) rather
than collecting all of the lines of output from the tools,
we end up with lower memory usage.
- when (manually) using an existing LV, it shouldn't be closed
prior to formatting, since that kills the volume and then the
path (/dev/myvg/mylv) no longer exists. Then creating the
filesysytem on that device path fails.
- Strings were being used as logical values, and then logged
(which should be in English) and also used in the UI (which
should be localized). Replace with a MessageAndPath class,
used only locally, that defers the translation until called-
upon explicitly.
- Replace some VG stuff with similar calls to apply().
Returning partition full-paths instead of only the block-device-name
simplifies later code -- which would prepend /dev/ to the block-
device-name and umount that.
- the tryX() functions weirdly return a string that is used for
debug-logging. Document that. The untranslated string is
later used for user-facing messages. Mark that as FIXME.
- factor out the loop-over-names-and-append to news, because that
makes the overall story of what is happening hard to read.
- all calls to tryCryptoClose() called tryUnmount() first, so
put that call inside tryCryptoClose(), so the interface is simpler.
- improve descriptive-strings in logging ("set?" is not very
meaningful)
- log only the unsatisfied entries, since the preceding
log-message suggests that that is what is happening.
QLabel allows scaling of the Pixmap by itself, and we have a
FixedAspectRatioLabel that scales a pixmap nicely. Use that.
(The new label type needed to be introduced to designer)
The screenshot should expand more agressively, so that it
does not get margins -- that just leave space around the
name and description -- when the window expands. Adjust some
of the stretching and layout in the UI file.
It is easier to put screenshots somewhere where
they can be searched-for, rather than requiring either
absolute paths (inconvenient to try out someone's
settings) or relative paths (because who knows where
Calamares will be run during testing).
The summary page can rely on the Config object to create
lists of relevant steps; this code was declared but not
defined / implemented for Config (but also not called, so
it was ok). This is basically shuffling bits around in
preparation for using the model directly, rather than
re-implementing the widget-creation code.
While here, split off the page-resizing into a free function
so that the code reads nicer.
- the page doesn't need to remember what step it belongs to,
if the step tells it when creating widgets.
- detach naming from the viewstep API that calls it.
Nothing beyond the example module was ever built with the
PythonQt bindings, as far as I can tell. They have been
deprecated, defaulting OFF for over two years now.
QML modules fill the gap with customizable, run-time
interpreted UI and stronger support from the C++ side
of Calamares.
The `partition.conf` file contains an EFI-size. The default is 300MiB,
but distributions might like to use a bigger (or smaller) value.
Apply the configuration consistently everywhere where we need
"the size of the EFI partition". Extend the internal method
to look at the configured size.
Apparently everyone shipping a squashfs image also has the tools
installed, because the error message reporting that the tools-are-
missing contained a reference to an undefined variable.
Fix that, and while here improve the error message so you
don't get a whole path as a title in the error message.
The slightly weird error-message construction is so that no
messages change and no translation work is needed.
All **other** modules fully specify libcalamares; only unpackfs
was importing shortcuts. Change to conventional usage (partly
because that's easier on the pylint implementation, partly because
it's then consistent with the rest).
Apparently nobody ever hit the else-branch here (because
each DM has exactly one implementation -- that's what the
check is there for!) because the logging of the error
itself would raise IndexError or ValueError.
Read, then write, the NM file. Add a note about how we might
handle this better. Rename live_user() function to give it
a verb (and avoid UnboundLocal when using a variable of the same name).
This class doesn't really set a pointer -- it is a scoped assignment
through a pointer, which **can** set a value on destruction (when
it leaves scope). Rename it.
While here, extend the API so that it can do an assignment to the
underlying object **now**, while also doing a scoped assignment
later when it leaves scope. This makes some code a bit easier
to read ("in this scope, X is now <v> and then it becomes <v'>")
This class was used only once, and is confusing because
the assignment happens always, but to the opposite value
as what was visible. It can be replaced with other
scoped assignment, instead.
Removes the tests for it, too.
- iterate over the lines of the source file, rather
than over indexes, and make clear that the hooks, modules and files
lines are replaced, rather than merged.
- this calls write() more often, but it's only a few lines
- don't chain directly from modify_mkinitcpio_conf() to the
function that writes the file write_mkinitcpio_lines();
split into "figure out what needs to be written" and calling
that writing-function, so that we can test / check / log
if needed between the two.
- put the system-information and -detection functions at top
and the "do the actual work" things below
- don't mix the boolean do-we-use-this flags with the
lists of files and modules which are the important
parts of modify_mkinitcpio_conf
- Transifex tools complain about missing Q_OBJECT (which makes
some sense -- you end up with a different context for calls
to tr(), of the base class).
This is intended to apply translations to some common Qt UI components.
Example: a QMessageBox with standard buttons OK and Cancel; the text
for that is determined at startup using the system locale, and later
changes to the current locale or the current translation catalog,
do not affect OK and Cancel. It might be possible to load a catalog
with the right translation strings, except that there is no way to
know what the context or catalog **is** for the strings that are
used to label standard buttons: they can come from Qt base, or
the platform, or the theme. Merely loading the Qt Base translations
for the correct language does not help, because those translations
do not contain an "OK" string with the context used for standard
buttons.
Do the translation by hand; then we have all of the Calamares
languages covered, too, which is more than the Qt translations do.
rewrite of keyboardq.qml, reduce stackview to 2, use a combobox for
keyboard models list
colors set to configurable
.xml files used for keyboard layouts, about a dozen added now
builds, runs, actions record as intended, GS filled correctly
