- Give LVM jobs a dummy argument Device* so that they
fit the functionality of makeJob for partitioning.
For those jobs that already take an LVMDevice*, this should
be the self-same device, but that isn't checked.
* Use the minSize when the target storage is smaller than the sum of sizes
* Percentage-defined partitions should be computed after setting hard-defined ones
This fixes issues when 0 byte partitions were created when the disk is too small.
Also fixes an issue with percent-defined partitions being forced to be defined at the end of the disk.
- create dirs as needed (this will normally be done by
unsquash, but for tests with paths it needs to be done
by hand)
- log what file is being checked
- filePath() doesn't like the absolute paths we have
(they're absolute in the chroot, and existing code
just sticks rootMountPoint in front)
Document keyboard change for Turkish F layout, and document
the keyboard configuration value better, with alternate
path used in e.g. openSUSE
FIXES#1397
Some tests -- notably the keyboard module -- need to have the
QRC for the module loaded as well (e.g. because of data in the
QRC). Add a RESOURCES parameter to calamares_add_test()
like calamares_add_plugin() already has, to build the
resources into the test.
Keyboard test now passes, since it was missing the data for
lookups before.
- both changing the autologin and changing the user (login) name
affect global storage, and both may need to change the autologin
username; split it into a free function.
- the fullname change was bypassing the login in changing the
login name, **but** then it needs a back-workaround to keep
the "custom" setting off (when custom is off, auto-fill username
and hostname is active).
- after loading the config, fill GS already.
- when finalizing GS, get the autologin settings again.
- setup the visibility and initial checked-state of the reuse-user-
password-for-root near where it gets connected; do similar
for the require-strong-password
- squash the lambda slot into the regular slot: no sense in
connecting twice to the same signal with the same receiver.
- only connect config->ui once
- only connect at all if the setting is visible (e.g. when weak
passwords are allowed for the require-strong checkbox, or
when root's password will be written for the reuse-password)
once completed, this can be a fully functional (offline) locale selection option
worldmap.png no longer needed/in use
working is the stackview of the region & zones models
Timezone text bar shows correct timezone
currentIndex see comments on lines 65 & 139, not working
update of timezone text bar can't be tested if working as long no index is connected (see lines 93 & 168)
Still, already committing, since it does more then old Offline.qml, which had no function for timezone
- point to main Calamares site in the 'part of' headers instead
of to github (this is the "this file is part of Calamares"
opening line for most files).
- remove boilerplate from all source files, CMake modules and completions,
this is the 3-paragraph summary of the GPL-3.0-or-later, which has
a meaning entirely covered by the SPDX tag.
In spite of there being considerable documentation sometimes in the
config file, we go with CC0 because we don't want the notion of
'derived work' of a config file.
The example `settings.conf` is also CC0. Add some docs to
it while we're at it.
Some Calamares source files incorporate material from
3rd parties (unlike the 3rdparty/ dir, which is basically-
unchanged 3rd party source). Tidy up the FileCopyrightText
lines for those sources.
This is not an exhaustive effort.
There's lots of (YAML) test data that is just trivial configurations
for modules. Since the configurations themselves are **also** CC0-1.0,
and the tests are less interesting, license them equally liberally.
The build instructions are not that interesting, it's a toss-up
between CC0 and BSD-2, but because other CMake bits are BSD-2-Clause,
apply that to more CMakeLists. The copyright date isn't all that
accurate, but these are just inconsequential files.
While here, tidy up and get rid of some useless intermediates.
The .ui files are all GPL-3.0-or-later style, but it's
slightly difficult to keep licensing information in them:
it's XML, so an XML comment might work, but there's no
guarantee that safe/load will preserve them.
Put the SPDX tags in the <author> tag, so that it's visible
in Qt Designer.
This was causing CI builds to fail, since WEBVIEW_WITH_WEBKIT
is defined only in the Config file, not on the command-line.
This crept in accidentally while trying to get rid of that
config file entirely.
Re-jig the module-weight calculations.
- modules can have a weight
- module instances can have a weight
- jobs, from the module, can have a weight
This is now configurable on a case-by-case basis, rather than having
C++ only as an option and a weird hack for unpackfs.
reflect changes from users/Config.cpp
corrected id missing capital
mirror UsersQmlViewStep.cpp/h with the users versions
connections are still not made
- if the user password is reused (or not) then check the
status of the passwords against the new reuse-setting
- if the allow-weak-passwords setting is changed, then
check the status of passwords (both of them) against
the new weakness setting
As explained by Kevin Kofler and abucodonosor, the
implementer line can carry a bunch of different values,
but none of them are actually interesting. Simplify
the code.
- the way isPasswordAcceptable was being used was buggy, leading
to test failures (now fixed)
- don't expose the function, anyway: it's an implementation
detail for passwordStatus() which in itself is an implementation
detail for status notifications.
- avoid update loops by checking values before emitting *Changed()
- check validity of user and root passwords when asked
- if root isn't going to be written, or re-uses the user password,
defer to those status checks.
- a handful of modules had an unused *requires* key in module.desc;
this is probably from previous intentions around
prerequisites-testing. Since the settings were empty anyway,
they have been removed.
- [unpackfs] Compacted the way *requiredModules* list is written
This module allows the generation of the initramfs in Alpine Linux based
systems (excluding postmarketOS). Very bare bones, but then again it
doesn't need much. It uses the Alpine Linux tool "mkinitfs" to do the
job.
module builds, installs and runs, connections are not working yet.
UserQmlViewstep.cpp/h are from PR https://github.com/calamares/calamares/pull/1356
sections are commented out to make the module build, but help is needed to get those 2 files corrected.
config names used in usersq.qml are guessed from users/Config.cpp
debug window shows correct entries in GS, and under the module tab, usersq.conf is read
as should too. Running shows most config used in users.qml are not registered/wrong,
many entries like: qrc:/usersq.qml:228:13: Unable to assign [undefined] to bool
It is understood not all needed from the users module has moved to Config.cpp yet,
but doing the PR now, since it runs, doesn't crash cala and help is needed to further implement.
- The TZ widget uses a different coordinate system (mapping lat and lon
to pixel locations, and then calculating Manhattan distance from
that), so needs a different distance function.
- Simplify code: there's just one "closest TZ" function.
- create directories for new tests ahead of the tests themselves;
this **can** still cause problems if a test is run standalone.
- if creating the grub-dir at runtime is necessary, be informative
if it fails.
- the default_dir was only stored in modify_grub_default() to
create the directory if needed; move that functionality to
the get_grub_config_paths() function (and drop the "s",
since it now returns just one).
Go over the locale module again:
- new models that avoid weird casts and inconvenient iteration
- shared timezone data
- simple sorting and filtering
- simplify the map / QML version
FIXES#1476FIXES#1426
- refactor into some free functions (out of the lambda's for connecting)
- introduce new method to call from onLeave(), matching previous
widget behavior
- we can do GeoIP and GeoNames lookups, **or**
- use Calamares's internal GeoIP lookup and country / city hints.
The online version is much more accurate, but costs more lookups;
in these examples, set it all to "offline" and document what needs
to change (code edit) to use the online version.
It's probably a good beginner job to introduce a bool in localeq.qml
to switch the behaviors.
- Config has suitable strings for displaying TZ information.
Use them and automatic bindings. Don't update the strings manually.
- Suggest online or offline TZ lookups based on what the distro wants.
Edit the QML to pick online lookups (needs access to the geonames
service, though).
- Drop the variables that point at config and geoip: the Config
object has a currentLocation, which is filled in by both the
configuration and any GeoIP lookup -- it doesn't have city
or country information though.
- status is a longer phrase
- name is a short human-readable name
- code is the internal code
Code that writes its own "Timezone set to" messages can use
the name, rather than the status.
- when no location has been set at all, there's no sensible TZ
to report; just leave it blank. In *practice* you won't hit this
code from the Calamares UI before a location has been set, because
the Config object is instantiated and then immediately configured,
but from tests or unusual UIs it could be.
- needs some massaging because Config otherwise depends on
ModuleManager which is a UI class (for the Reasons),
but we already have a BUILD_AS_TEST define for that purpose.
- demonstrate a nullptr deref.
- The Config object now uses the re-done models and timezone data
- most of the properties of the locale Config are unchanged
- much less complication in extracting data from the zones model
- there **is** another source of information about the CPU,
so in the test use that to cross-check what hostCPU() says.
NB: it's probably a good idea to fall back on the same file
in hostCPU() for better accuracy.
- get username, password etc. from the config object, not the page
- jobs now depend entirely on config
- handle logic of "what's the root password" in Config
- The configuration for writing the hostname (to /etc/hostname,
to /etc/hosts and possibly to systemd-hostname) is read-only,
because it comes from the config file and won't change after.
- add the "reuse user password for root" setting to Config,
make the UI page follow that setting.
- add the require-strong-password default and toggle settings to
Config; this is not well-checked yet.
On the widget / UI side, connect checkboxes only if they are
visible; refactor reuse-user-password-for-root settings.
The TODO said it was unused: it **is** used, but only in
a very limited scope. Drop it from jobs where it wasn't
useful (e.g. those that just return prettyName(), outside
of the partition module).
- no need for the definition to be in public header, move to implementation
- while here, sort the members and private methods
- add a makeJob() to add jobs to the queue
- having a struct with an obtuse API for adding jobs-that-need-to-happen-
to-this-device is just not good for maintainability.
- break the build by making things private.
- The enum for install choice was copied into PartitionActions and
used in the Config object; its definition does not belong in the UI.
- Chase the renamings required.
- add an option to select what button should be selected when the
partitioning module is started; TODO: the actual functionality is
**not** implemented.
- drop the previously suggested name, which didn't get beyond the
comments-in-the-config-file stage (but which intended to do the
same things as this one)
- add option to schema already, even if it's not implemented.
See #1297
FIXUP conf
The encryption widget (passphrase for disk encryption) should show
ok / warning / error whenever the state changes; this avoids
it showing up first with **no** icon (it should show a warning
when both passphrases are empty).
Both the KPMCore and the ChoicePage -- asynchronously -- were connected
to the nextStatusChanged() signal. So if the core said next was true,
that could end up communicated to the ViewManager, enabling the *next*
button in the UI.
Changing to the *erase* page generally triggers a KPMCore reload,
which later emits a `hasRootMountPointChanged()` signal, once the
layout is applied and the disk gets a root mount point. So we'd
get a `true` from KPMCore, which -- because it was connected directly
to the signal to the VM -- would override any other considerations.
Hook up both signals to an intermediate slot that just recalculates
whether the next button should be enabled, based on the state
both of the Choice page and whatever else.
- drop groups from the viewstep
- note that the Config object should also be in charge of creating
Jobs (but then the de-tangling needs to be completed)
- add tests of default groups loading
Doesn't compile because QRegExpValidator is a gui thing.
- This is a half-step: the ViewStep shouldn't do job creation either,
eventually it needs to be the Config object, but this is better
than asking the widget (UI) to create some jobs.
- When updating login- or host-name, or the autologin setting,
set it in GS as well. This is a minor improvement over doing
it only when leaving the page.
- Since the Config object isn't complete, there are leftovers in
the widget, which has a fillGlobalStorage() for the not-jobs-related
bits previously in createJobs().
- since the configuration is in the UI parts, we need the widget still
to load the whole configuration (until the config object is complete).
Create the widget before doing configuration; this is wrong. But now
we don't hit nullptr derefs all over.
- make the HostName textbox just a view on the Config's HostName
- make the username and login textboxes view onto Config
- query the Config rather than the UI for job data
- delay construction of the Page (widget) until it's needed
- hand the Config object to the Page on construction
This is prep-work for putting the configuration information into the
Config object, rather than in the UI elements.
- most of the things in utils/ are in the CalamaresUtils namespace,
let Permissions follow suit. Chase the name change in the
*preservefiles* module.
- add an `apply()` function for doing the most basic of chmod.
Note that we don't use `QFile::setPermissions()` because the
**values** used are different (0755 for chmod is 0x755 in the
enum value passed to `setPermissions()`).
On the "Users" tab, the user can choose a username. It was possible to
use 'root' as username, which led to an installation error, because
'root' exists already.
Added a new check to the username validation.
Fixes#1462.
With PR calamares/calamares#1357 the label of the "Manual partitioning" option
was changed, which introduced several downsides:
* The label is shown for UEFI and for BIOS installations.
* The mountpoint of the ESP is and should be distro specific.
* The label always mentioned GPT, which is irrelevant.
* The label should explain, what the option does, and not, what
problems can occur under certain circumstances.
set index in i18n.qml to -1, old settings were just for reading from the bogus model
current model uses strings, so index fails to read from it. This fixes cala crashing on loading i18n.qml
- already had methods for various kinds of broken-up data, but
not one for plain "region/zone" strings; having this makes
it easier for QML to report a zone.
- use the region/zone method from QML, so that clicking on the
world map updates the actual TZ in Config.
- get network status from the global Network object; document that
- get the strings describing the language and LC settings from
the config-object instead of roll-our-own
- use the model of supported locales from Config to populate listboxes
- connect selection of language or LC to the Config object
- remove stray and useless TODOs
- remove unnecessary empty overrides
- clean up includes
- drop all the code that is now in Config
Since the business logic (setting locations, maintaining GS, ...)
is all in the Config object, the ViewStep is remarkably simple:
hook up a UI to the Config, which in the case of QML is done
automatically.
- since the Page hooked up a model and changed the region-selection
**after** connecting to signals, it would reset the location
to Africa/Abijan (alphabetically the first timezone) during
construction. Don't do that.
- this doesn't do the lookup **yet**
- while here, refactor setConfigurationMap so it reads like a story,
with chunks bitten out into a handful of static inline void methods.
- read the *region* and *zone* settings; this duplicates what
the ViewStep does and is currently unused, but ..
- add new support for using the system's TZ (rather than
the fixed values from *region* and *zone*). This complements
GeoIP lookup.
This is the actual feature that started the long rewrite of
the Config object (so that all the business logic would be in
one place, usable for both widgets and QML).
FIXES#1381
- writing *localeConf* settings to GS can be done always when the
formats are set, rather than special-cased. The code
that handles the "special case" of no widget existing for the ViewStep
overlooks the other crashes that happen then.
- Since Config knows what jobs to create, just ask it rather than
keeping a copy.
- allow finer-grained control over whether-or-not to adjust the
timezone in the live system.
- handle some special cases at the point of loading-configuration.
- document the setting in locale.conf
- correct some documentation bugs
- adjust the YAML schema for locale.conf so it's legal YAML syntax
**and** validates the current file.
- since all locale changes need to be entered into GS anyway, this
is something the Config object can do because it is the source
of truth for locale settings.
- drop all the GS settings from the Page.
- remove the weirdly-structured prettyStatus and similar:
the Config object has human-readable status strings (three,
for location, language, and LC-formats) which can be
normal properties with signals.
- Implement prettyStatus in the view step by querying the Config.
- the language and LC settings migrate from page to config
- add API for explicitly setting language (which is then preserved
when clicking new locations)
- since Config knows what settings there are, it should create the
jobs to run later -- not the Page.
- this doesn't work yet, because the Config does **not** know what
the selected timezone is yet.
The Config object wasn't being used at all in the locale module;
reset it to empty and start using it in locale, so that
configuration functionality can be added to it as-needed,
and with the necessary refactoring built-in.
- previously, the first column (name) was sized to show the
names **that were visible at startup**, which fails when
there are long names hidden in groups that are not expanded
immediately.
- change the columns to resize according to the contents; this makes
the descriptions jump to the right as the name column gets wider.
FIXES#1448
- there are no consumers for checking-the-capacity-of-the-drive
This parameter was introduced in 3cd18fd285 as "preparatory work"
but never completed. The architecture of the PartitionCoreModule
makes it very difficult to get the necessary parameters to
the right place, and it would probably be better to put
a SortFilterProxyModel in front of a partitioning model anyway.
Since the display code can already filter on size, just drop this one.
- fix the schema so the schema is valid json-schema
- the schema doesn't actually validate the *operations* yet
- sort the named backends (needs a double-check that the
list covers all the ones we currently support)
SEE #1441
- Don't do in code what is already done in the designer (.ui) file
- setFrameStyle() is difficult because it mixes different enums
into an int, which causes the warning from clang.
- Give classes a virtual destructor that need them
- Remove spurious ;
- Refactor addJobs() because that doesn't need to be in a class
- Remove redundant intermediate base-classes
- Initialize the attribute partAttributes to 0; it is a primitive type
and it is not initialized in some constructors.
Fixes commit c1b5426c6 ([partition] Add support for partition attributes).
- Move implementation of default constructor to cpp.
added missing components listed as ResponsiveBase, ListItemDelegate & ListViewTemplate
parts of which were on nitrux
keyboard.qml no longer uses buttons within ListView, can't work as buttons and have them visible
see https://doc.qt.io/qt-5/qml-qtquick-listview.html#footerPositioning-prop
set ListView as actually visible within a normal calamares window size
- If the 'no tracking' box is checked, then the way to uncheck
it is to tick some **other** box.
- It doesn't make sense to unselect 'none' and then have .. none
selected.
KDE neon does not do this kind of tracking -- although it was originally
requested by KDE neon, no server roll-out was done once the
privacy policy was thought out.
- give the on-some-checkbox-state-changed slots better names
- while here, refactor is-any-actual-tracking-option-checked
- improve other debug messages, to be a whole sentence
- These have **not** been fixed for validation, so the schema's themselves
will fail to load. This is a consequence of variations in JSON-Schema
representations through various drafts. Fixing the schemata is
fairly straightforward.
This gives us 19 new tests, all of which fail.
- Note that this is missing *languageIcon* so if that gets uncommented,
it will fail validation.
- While here decide that should be
right up front in object (mappings) declaration.
- link the library privately -- the public API uses QVariantMap
- install FindYAMLCPP just in case
- add yamlcpp explicitly in the few places that really need it
(e.g. netinstall testing the parsing of netinstall.yaml)
- Do all the status indication in one component, but vary
the top-level message based on whether the mandatory
requirements are satisfied.
- Vary color and icon based on each requirement's *mandatory* setting.
- The Radio's are replaced by CheckBoxes and some logic, so
that different tracking styles can be enabled independently.
None of the settings end up in the Config yet, though.
- fixes:
12:44:25 [6]: Python Error:
<class 'TypeError'>
'builtin_function_or_method' object is not subscriptable
File "/usr/lib/calamares/modules/rawfs/main.py", line 188, in run
item.copy(filesystems.index(item), len(filesystems))
File "/usr/lib/calamares/modules/rawfs/main.py", line 99, in copy
if libcalamares.job.configuration["bogus"]:
- All the configuration lives in the Config object (or the
tracking objects that it exposes).
- Get data from the config object for the jobs; TODO: give the
jobs a less-clunky interface.
The UI isn't hooked up to the Config object yet, though.
- a single tracking type can be enabled for configuration in the
config file; each must have a policy URL. Class TrackingStyleConfig
is a base class for that kind of configuration.
- root_mount_point was used initially for logging c1a139995 (adding new
bootloader job options are to use grub for BIOS, gummiboot for efi set
extra mountpoint when efi is found)
- the trace was removed since 533031b3c ([bootloader] print() does not
log)
- The Python configuration tests sometimes need extra setup, so
do that through a CMakeTests.txt file in the test directory.
- Patch up existing tests:
- grubcfg needs /tmp/calamares/etc/default to exist
- rawfs won't work on FreeBSD because of differences in /proc
- drop the *discard* from filesystems-on-SSD in the standard example
configuration.
- keep the table **with** *discard* around for referece and explanation.
Remember that the example configurations are intended as **examples**,
to document available settings, and do not reflect a sensible
production configuration.
FIXES#1395
clean up obsolete lines in welcomeq.qml
add requirement section from welcome.conf to welcomeq.conf
data shows correctly in Recommended.qml, fails to show any in Requirements.qml if run without admin rights
This makes it possible to remove QML from Calamares, possibly yielding
a smaller, lighter installer; it takes with it the nice slideshow,
modern configurable navigation and the QML UIs built for various modules.
By default, WITH_QML is on and the "normal" feature set is retained.
- look for Qml modules only when WITH_QML is on (the default)
- look for Network, since that's pulled in only implicitly
- disable the QML Calamares models (modules/*q) if no QML is
enabled; longer-term plan is to merge the **pages** back to
the "upstream" modules, and have things be run-time switchable,
but that's not here yet. Also disable the notesqml module when
QML is off.
- The requirements are collected by ModuleManager, checked
by an internal RequirementsChecker and changes to the
requirements state are all signalled from ModuleManager.
By connecting the requirements in the welcome modules' Config
only to their own configs -- and immediately checking them,
which is bad on its own -- we end up with a disconnect between
what the ModuleManager says about requirements, and what
the welcome modules report on.
fully implemented:
* loading of a live map, ESRI based, zooming & dragging possible
* IP address is translated to map coordinates
* loading of the map centers to the obtained coordinates, with a marker set
* coordinates are translated to a timezone, label visible at bottom of the map
* mouse movement will show changing coordinates
* clicking on new location will center map there, marker moved too, timezone label adjusted
* hasInternet switch set to either load Map.qml or Offline.qml
not done:
* get hasInternet status
* fill the fine-tune 181n.qml with proper locale & language data
* connect the obtained timezone to globalstorage
comments are left in the various files for what needs attention/changes
Improve testing framework while adding tests to rawfs to double-
check that the conversion (for Python 3.3 compatibility) of
capture_output is correct.
- If a module has tests/#.global or tests/#.job, these are used
as arguments to a test-run of loadmodule (which reads them
and runs the module with that configuration).
- This makes the old python-loading test and test-runner entirely
obsolete, so remove them too.
Region "Africa" zones # 52
14:25:19 [6]: .. Zone "Asmara" QPoint(445,183)
14:25:19 [6]: .. First zone found 2 "2.0"
14:25:19 [6]: .. Also in zone 3 "3.0"
- The Config object can handle GeoIP loading on its own. Both
View steps that used this had a derpy view->setCountry() that
didn't really do anything with the view anymore.
- This forces the EFI firmware to boot the loader that was just
created, whatever the boot order set in the firmware setup (USB,
CD/DVD, HD...).
- It is safe to use the first Boot Entry listed in BootOrder as the
previous command creates the new entry and adds it to the first place
of the BootOrder.
- sometimes if you use external OEM modules you might have those lines already present
- by skipping them you won't have double lines when rerun the module in a later step
- things that can be done in the designer file should be there,
not weirdly repeated in code elsewhere
- drop the insertion of an extra spacer (why not include it in the
designer file?)
- shuffle all the connect() calls down to the end of the constructor
This commit adds the new configuration `efiSystemPartitionName` to the
file partition.conf.
This option sets the partition name to the EFI System Partition that is
created. If this option is unset, the partition is left unnamed.
- Although we long ago replaced the getPartitions implementation, the
test is still there, and on a machine with no /dev/sda (e.g. because
root is on nvme) the echo-awk-shell-pipeline can give an empty string;
this is turned into a QStringList{""} which has one element, while
the new version has 0 elements.
- Special-case the test that empty strings should be empty lists, rather
than 1-element lists with an empty element.
reads data from languagesModel correctly, debug added to see index changes
code cleanup
button layout improved
install info text added, better spacing of text
about button no longer commented out, 3 reasons:
- info provided by any about is standard, will be odd if it can't be found
- about.qml is a seperate file, can be completely adjusted
- not showing it takes away the options for new QML cala users to see what is possible with Loader, thus stopping new possible contributors
- This is a follow-up to d0c205c1cc6a2ae49935c92bfd52911b9a0d43f7;
I really don't know why static constexpr const elements that are
not referenced by address need to be defined separately.
- rename enlarge to ensureSize() and change the meaning from
"make this much bigger" to "make sure this is displayed",
which is easier on the caller to calculate.
- This isn't something that Calamares can acutally fix,
so the test will be disabled later. After all, if
Brazzaville and Kinshasa are close enough that on the
map they are the same pixel, we can't move the cities.
- Merge all the format documentation into netinstall.conf,
where the example is given in full as an embedded
*groups* entry.
- Get README.md to point to the example.
- Fix up headers in netinstall.yaml, pointing to the
embedded example in netinstall.conf.
Timezones updated for these countries found on pixel detection tool
Dublin is in 0 (-1 needs editing)
Gibraltar should be 1.0 (0 needs editing)
Guernsey and Jersey are in 0 (1.0 needs editing)
Lisbon is in 0 (-1 needs editing)
Vilnius should be in 2 (1 needs editing)
- QImage needs Qt5::Gui, so this isn't a guiless-test; it can use
the offscreen QPA, though.
- Check that the images are all the same size
- Debugging / check code removed from timezonewidget
- The idea is to check all the TZ images for consistency, like
TimeZoneWidget::setCurrentLocation() does when DEBUG_TIMEZONES is
on; a zone-pixel should be set in only **one** image.
The test so far is just a stub.
- Make all four DEBUG_ flags actual CMake options, rather than
stuffing some of them in the rather-peculiar _enable_debug_flags.
Each debug option turns on suitable compile flags in the module(s)
that are affected.
When one of these common names for the netinstall page is used,
it gets pulled out of the standard translations, so that it
doesn't have to be translated in the per-distro config file.
These labels are common enough that they make sense for
everyone to have lying around.
FIXES#1367
(I say "fixed" but of course it's going to depend on the translation
workflow to make these available)
- Slice overall progress into chunks, with each chunk of equal size
(as long as we have no overall count information) and place
the progress of the current chunk into its own slice.
- The entry knows where it should be mounted, and can remember that
- mount_entry() didn't use self, so made no sense as a method
of the Operation class
probably due to dynamically loading items
regionModel now lists, zonesModel only lists one delegate, but
working on QML modules can now continue without crashing cala
This doesn't actually **work** though, the QML uses older Calamares-internal
APIs and uses a ResponsiveBase that we don't have. Merge it mostly for
the Config and model changes.
FIXES#1355
- io.calamares.modules doesn't exist
- ResponsiveBase doesn't exist
The module is now non-functional, but at least it loads and renders
a list of regions and zones.
- name default / example QML conventionally
- copy QRC from keyboard -- the QML needs to be included in the QRC --
since we don't want to have the QML in the keyboard module.
using Loader, can be reused for other widgets conversion
leave onClick example with full path, commneted out
title text for About is hardcoded, discuss option to make this configurable in welcome.conf
background color hardcoded, tested to work well in dark themes too
- Groups inherit slightly differently: if a subgroup **explicitly**
configures criticalness, use that. It would be weird, but possibly,
to have a non-critical subgroup of a critical group.
- An unselected group with (some) selected subgroups was not
displayed as (semi)checked -- it was unchecked, because
its checked-ness was not updated based on the children.
- isEfi only used meaningfully once
- if (isEfi) followed by if (!isEfi) can be simpler
- create bios-but-not-GPT strings in one go
- mark TODO that this should warn only if needed
- use weird * notation for branding-strings
- It's annoying to have 100% progress reported (from the processing
of list items) and then have another 3 seconds delay.
Unrelated to the issue-at-hand, but spotted in testing.
- Instead of loading all in the constructor, provide a public
setupModelData().
- This allows creating the model and setting it for UI, before
the load completes.
- Add initial definition of Config object, which will extract the model-
setting and loading code from the page, and which is also prep-work
for a QML version of this module.
- While here, remove superfluous code
- For a static list of selectable packages (e.g. what you might otherwise
use file:/// for with a static file on the ISO) you can now stick the
list in the config file itself, simplifying some setups.
- Also saves faffing about with network.
SEE #1319
- `local` is supposed to read from the config-file, rather than
externally; this simplifies examples, makes it easier to have
multiple netinstalls, and condenses the documentation.
- Check groups
- Check whole treemodels recursively (this is not in PackageTreeItem,
because that explicitly ignores the tree structure).
- Also a stub of checking example files (from the src dir)
- Just some simple tests for the Items
- Test creation of package group from variant
- This needs Qt5::Gui to link because QStandardItem is a GUI class,
although we can run the tests without a GUI.
- This doesn't compile right now.
- The nested class ItemData doesn't do anything useful or
meaningful that having model items with the right data wouldn't.
- can't convert lambda-with-captures to a function pointer (Clang 9)
- instead, use a context property .. QmlViewStep already sets a
"config" property with the Config object, but WelcomeQ wants it
as another name as well.
- this avoids registering the Welcome object across all QML pages,
as well.
NOTE: needs to have the QML adjusted for this change.
- The name is just the module identifier, and now we
search for *m@i* and also *m* from that identifier,
the name becomes much less important -- and it
can be set from the config key *qmlFilename* as well.
- To avoid name-collisions in otherwise well-behaved
modules and configurations, make the QML settings
more specific:
search -> qmlSearch
filename -> qmlFilename
- Introduce convenience methods getString(), getBool() to pick
out an entry from item definitions in YAML format.
- Apply coding style.
- Pick up the "expanded" property as well.
- Use normal translation framework. The EncryptWidget was the one place
not using the "usual" translation framework, but rolled its own.
- Emphasize that the checkbox-state (checked-ness) is the parameter,
not a state of the EncryptWidget.
- All other instances of UI classes from Designer use a pointer-to-UI,
not multiple inheritance.
- Convenience method for setting the pixmap in response to
changes in the passphrase
- Tighten up types: enum -> enum class
- Reduce the scope for int-confusion by using an enum-class for
the encryption state of the widget
- Include UI implementation header only in .cpp
- Apply coding style
- Update copyright
- there's no string representation for a QVariantMap, so it
won't be converted; in *debug* output it looks like there's a
string there.
- off-by-one when diving into compound selectors, spotted by
test, now fixed.
In order to test some of the internals, split them into Binding.h.
This makes the interface visible for tests. The implementation
still lives in the same place.
While here, adjust the test to the changed **example** which
now lists an additional variable.
- Warnings, errors, don't get funcinfo, but regular cDebug()
calls do. Other special-cases, like calling Logger::CDebug()
constructor explicitly, don't get funcinfo either.
FIXES#1328
Unset GRUB_SAVEDEFAULT if / or /boot is in btrfs or f2fs partition. This avoids the error "sparse file not allowed" at boot time. Btrfs and f2fs do not support saving default entry in grub.
- !failed() also means "didn't write the file because it already
exists", which is sometimes acceptable -- but not here.
Use the more-strict bool() conversion, which is only when
the file was actually written.
- Make tests more resilient: do them in a temp-dir, and clean it
up after successful tests. This was prompted by tests failing
because of things hanging around in /tmp.
- Follow original patch from Gabriel Craciunescu: just drop
the *bufsize* parameter and stick to binary reads.
Text mode was associated in my testing with multiple hangs,
which didn't show up during binary-reads.
- By the time the GS is actually written, new (for partition state)
is always false. So "new" is the wrong thing to track. It should
have had a better name anyway,
- We store custom properties on the partition objects to indicate
what happens to them; use those properties (instead of state,
as done originally), call it "claimed" to indicate that the partition
is part of this installation.
For now, only new (as in, formatted, created-by-us) partitions are
claimed.
- The effect here is that only "new" swap will be added to the system,
so in erase-disk installations, or manual partitioning.
- Install-alongside and replace will now **not** claim the swap already
on the disk; I think we'll need another UI knob for that one.
FIXES#1316
- `createPartitionList()` is called for the summary widget (via
`prettyDescription()`), and from `exec()`. Only the latter
actually *writes* to Global Storage, so it's misleading to
think that the pretty-printed version ends up in GS.
- This makes the "new" key useless, since by the time `exec()` is called
the partitoons are no longer new.
- These tests don't actually test anything in this specific module,
they do test CalamaresUtils::System.
- Wrangling System and JobQueue and GlobalStorage instances is fraught
- The model always has two columns, and the column names are always
the same. We don't need to specially set headers for that.
- Use QCoreApplication::translation() to re-use the existing
translations and avoid creating "new" strings (in a new context).
- Now that multiple netinstall pages may be supported, it's annoying
that they all have the same name. Copy the approach from other
modules (e.g. notesQML) of having the sidebar and other labels
configured in the config file.
- Since operations are added each time you leave this page,
the existing operations (from a previous visit) need to be
cleaned up. With the old setup of only **one** possible
set of operations, this wasn't a problem. Now, merging
in operations is necessary. Implement that by looking for
the *source* property in an operation.
FIXES#1303
- Having the widget do creation ties the step heavily to that UI;
start moving towards a state where we have a Config object (not
here yet; it still queries the UI part) that moves data around
between UI and ViewStep.
- This makes linking easier,
- Adds the right includes (needed on FreeBSD),
- Lets us drop silly GUI setting for non-GUI tests (I think this was
a side-effect of compiling on FreeBSD, where UI would pull in
/usr/local/include).
- Let's just have one header definining export- and visibility-
macros for Calamares. They are still selected based on the
export flags (*_PRO), just defined in one header instead of two.
- Use the createTargetFile() convenience functions to do the
actual work.
- This probably involves more copying around of buffers, since it's
creating one big QString and sending that off, rather than writing
little chunks to a file, but I feel this is worth the code simplification.
- Drops all the error checking for creation, though, because the API for
createTargetFile() lousy.
Introduces a "partitioning service" into libcalamares,
shuffles a bunch of things into it, tries to help out
with settling the system between partitioning actions.
- explicit use of user-visible names in EditExistingPartitionDialog
- consistent conversion of config-values to FS names (user-visible).
The GS value comes from the ViewStep, and should always match
something -- it's already converted to the canonical un-translated
so the type should be good.
- The config context object should be set earlier, otherwise
QML code will try binding to a non-existent config already
- Document that QMLViewStep::setConfigurationMap() parent implementation
should be called **last**, at the end of the subclass implementation.
- Physical memory can't be negative, so it is reported as
an unsigned long, but the bytes-to-MiB functions do accept
negative amounts. As long as no machine has more than 2**62
bytes of memory, we're good though.
- Create a job and ask it to create dbus files -- either directly,
or as a symlink. Since the target chroot isn't viable, this will
fail but we can at least see that directories are created, etc.
- add a Settings::init() to do actual work
- remove the same kind of code from CalamaresApplication
- make constructor of Settings private
- initialize settings before the application
- Most of the code was error-checking, just replace the open-read
with a call to the service instead.
- It's not an error if /dev/urandom doesn't exist in the source system
(there may be other good random sources, and otherwise we have the
low-quality random fallback).
- the list is already filtered for UTF-8, so this is redundant
- this *incidentally* fixes the problem with Assamese and Asturian,
since Assamese (as_IN) was having its only entry removed,
after which it would match Asturian (ast_ES)
- these were empty, so the widgets were hidden in the details
dialog of the requirements check; which looks really strange
if the reason the check fails is because root is required,
and you can't see that in the details.
This commit is on a branch because it changes strings, and I want
to do a release Real Soon and not annoy the translators.
- instead of counting and needing to keep track of the predicate
applied while creating the widgets, push nullptrs to the widget
list instead reflecting "this entry did not satisfy the predicate
for widget creation".
- for the list, the code can be the same as for the dialog,
only the predicate is different.
- while here, implement retranslate() since there's no text on
the list widgets otherwise.
- Create the label once, and it's ok for it to respond to links
even if there's none in the code.
- Turn into a member variable in preparation for retranslation-refactor.
- lift it out of the loop that creates the widgets
- some lambda-wankery, but the compiler hammers this down to
simple loops and you can read the resulting code as
none_of [the list] isUnSatisfied
none_of [the list] isMandatoryAndUnSatisfied
- no point in having init() called immediately after the constructor,
if it only makes sense to have one call to init() ever to create
the widget.
- while here, give it the same kind of structure as the dialog,
holding on to a reference to the list.
This is an ugly hack, using Bill Auger's support for Job weights.
The unpackfs job is arbitrarily awarded a weight of 12. That makes it
(in a Netrunner install) use progress from 12% to 40% or so, overall,
as all the files are unpacked.
Also fixes bug reported by Kevin Kofler that unpackfs was only reporting
progress when it hit an exact multiple of 100 (instead of over 100).
SEE #1176
sidebar entry can be configured and translated
adding a more elaborate qml example
keeping this in dummyqml for now, another commit will follow with
continuation of dummyqml in a more aptly named module
- start of a class to hold configuration information; this can
later be substituted into the WelcomeViewStep and filled from
setConfigurationMap()
In the example application:
- register the Config type
- test application to display the QML (this will be extended
with adding the locale model to it)
- sample QML that does nothing useful yet (will display the locale
model once it's there)
- all the TZ location information now lives in the Calamares
locale service and the TZ list
- replace the Location class that was local to the timezone
widget by the TZZone class
- chase a bunch of small API changes that this needs
- Used in only one place, move to .cpp
- Drop useless scaling all the images *are* that size already
- Add debugging check that the images match expected size
- search for a key and return a type-cast pointer to the result
- while here, simplify some other code
- the find() function could be done with std::find_if but doesn't
get any shorter or more elegant
- By using QList< CStringPair* > consistently, we can save
a bunch of model code at the cost of an occasional dynamic_cast;
it's fairly rare for there to be a need for the derived pointer.
- needs a qwidget to put the top-items (license name, button) in
- fixes issue where the gap between the button and the hrule would
change depending on what is expanded
- Move layouting code into the .ui file
- Reduce margins hugely -- atop the title block, around the
scroll area, etc -- so that more license is visible at once.
- split shared <h1> message off
- do some string-concatenation, but only of whole sentences
- shave off some vertical space by dropping the mainsubtext item
- In code, add the necessary bool
- document meaning in the config file
- actually expand the full text if the entry is local and set to expanding-
by-default. This implementation is a bit lazy since it just pretends
to click on the toggle button.
- While here, reduce scope for UB by initializing POD members
- The arrows Up, Down, Right are used on toolbuttons, but
in the context of this module, those are directions with
meaning; give them better names.
- Because of #1268, the meaning of up- and down- may be swapped;
I'm not sure of which look makes the most sense. This is prep-
work for easily swapping the looks by using the meaningful names
instead.
SEE #1268
- we loop over all the entries anyway, so calculate allLicensesOptional
along the way (debatable whether std::none_of is clearer)
- always un-check the accept-box when resetting entries.
- Toggling the checkbox could disable the next button
because only the checked-state was used, instead of
the next-is-enabled-if-everything-is-optional member variable.
FIXES#1271
- Move retranslation to a separate slot to allow it to be
formatted nicely.
- Use calculated m_allLicensesOptional in retranslation.
- Untangle determining if all licenses are optional; std::none_of
returns true on an empty list.
- Scenario: *keepDistribution* is true, and the existing file contains
a GRUB_DISTRIBUTION line **followed** by a commented-out GRUB_DISTRIBUTION
line.
- In that case, the commented-out line would change the flag back to
False, and we'd end up writing a second GRUB_DISTRIBUTION line at the end.
Prevent that: the flag can only go to "True" and then stays there.
Editorial: If your grub configuration would have tripped this up, then
you're doing something wrong. Clean up the configuration file first.
- If we update the line, then GRUB_DISTRIBUTION has been set
- If we don't update the line (e.g. because of *keepDistribution*)
then a comment doesn't count as "have seen that line".
This means that if we get to the end of the file, with only commented-
out GRUB_DISTRIBUTION lines, and *keepDistribution* is set, then we'll
still write a distribution line -- because otherwise it's not set at all.
- Previous fix would erase the distribution information (using an
empty string to flag 'preserve existing GRUB_DISTRIBUTION lines'),
but that is fragile. A distro might set that, and yet **not**
set a GRUB_DISTRIBUTION line, in which case it would end up with
a setup without any GRUB_DISTRIBUTION set.
- When a GRUB_DISTRIBUTION line is found, **then** check if it should
update the line or not. This way, we have a suitable distribution
to write if no GRUB_DISTRIBUTION is found at all.
- move the explicit checking for non-empty into a specific
(normal) password check
- leave only the-two-fields-are-equal outside of the password-
requirements framework
- having non-empty is the same as minLength 1, but gives a different
error message
- the two explicit checks are the ones that handle *two*
strings as special cases; all the other checks from
the password-requirements system only handle the one string.
- the explanations under and around the boxes is noisy,
hard to size correctly (viz. issue #1202)
- use tooltips in almost-all fields instead
- add placeholder text to be more suggestive
- since the wording of the checkbox itself (and the functionality)
is to enforce strong passwords, need to switch out some
logic and fix the wording of the documentation.
- Give the whole entry to file_copy, not just the
destination. This will allow file_copy to work
with local excludes.
- Pluck entry.destination out immediately, to keep
code changes minimal.
- Document the parameters.
- list_excludes() turns the extra mounts from global storage
into --exclude parameters for rsync; it doesn't do anything
with the destination parameter.
- while here rename to something more descriptive
- it's ok if item one creates directories where item two will write,
so don't check for existence of all directories on start-up.
Reported by ArcoLinux.
FIXES: #1252
This adds to the *machineid* module (which generates random UUIDs
for DBus and systemd) another key to configure generation of
a urandom pool in the target from the entropy in the host system.
- Improve documentation of the settings
- If sysconfigSetup is true, **only** setup sysconfig and ignore
the rest. This seems to be consistent with existing openSUSE-
derivative distro's, which set displaymanagers to something
nonsensical.
- the *mount* module inserts a rootMountPoint without trailing /
into global storage, so we can't assume that here. On the other
hand, the paths passed in to the Worker functions are absolute
paths -- adjust the tests to follow that.
- The code in Workers.cpp assumes that rootMountPoint ends in a /
so that it can have filenames appended easily; make the tests
fit that assumption, but still need to check that it is so in
production.
- refactor running the command into a helper function,
to deal with the regular if-command-failed-then-complain pattern.
- mark parameters as unused.
- move distinction about kind of DBus file up into the MachineIdJob
and remove the enum that marked it.
- Testing some of the functionality that's been added just now:
- copyfile fails, buggy implementation
- poolsize fails, buggy implementation
- removefile not tested
- read-urandom or copy-existing-file are implemented
- fairly chatty on failure
- needs tests (probably the implementation should be moved to
a separate file and unit-tested)
- keep the rootMountPoint and the path-with-random-data separate
instead of concatenating them at the beginning. Then we can
use the "clean" names also within the host system.
- remove existing files for each kind of random-generation
that is enabled. There's a helper function for the case that
Cala is no longer setuid and needs help to remove those files
from the target (e.g. a setuid helper).
- Just use the existing rsync code, which can do both
files and directory trees.
- The existing code assumed we were always copying directories.
Now double-check beforehand.
- if a default DE is configured but the executable doesn't exist,
believe the .desktop file. Then use that, and warn if the
whole thing can not be found.
- for a DE entry which has a bad executable setting,
update the entry from the .desktop file using TryExec.
This assumes that the TryExec command is actually something
you might want to run.
- Sessions can be X11-sessions (living in xsessions) or Wayland-
(living in wayland-sessions). Look in both places.
- Refactor code a little to make it nicer to read.
- Do the async GeoIP checking in the async requirements-checking phase
- Do not return any requirements results -- we just need the async bit
- Drop the waiting widget, since it's not needed (done by the
requirements phase)
- If there is an item with id "" (empty), it is used as the
"no-package-selected" placeholder text.
- Existing code iterated over the abstract model and used the
name and description at the time the model was set -- but
by getting the name and description from the model, only
a single string was obtained instead of the full range
of translations.
- Therefore, when arriving on the page, the "no-package-selected"
information was displayed from the translation that was active
when the model was set.
Instead, extend the non-abstract model so we can find the no-package-
selected item and pass that explicitly to the page.
FIXES#1241
- Since the package chooser might be used more than once, or for
more specific items than "Packages", introduce a way to provide
specific strings for display.
- The only string needed is the ViewStep name, since the item with
id "" can be used for the no-selection item.
- This helps give meaningful names to code chunks
- Gives clang-format something to work with
- Reduces indentation depth
I think this is a bit of a code-style opinion issue: big complicated
lambdas doing UI things just don't seem like a good idea.
- hangs unpredictably during testing
- replace with the Calamares process-invocation runCommand(), which is also
synchronous but doesn't hang (or, hasn't, in testing so far)
If we don't have/need an image for the rootfs, we might want to
configure the `/` directory as a source for unpackfs. Unfortunately,
this raises an error:
- unpackfs first creates a temporary directory
- it then creates a subdirectory for each source, using the source
path's basename
- when the source is `/`, the basename is an empty string, therefore
the module tries to create an already existing directory
In order to prevent this error, we use the `os.makedirs` function with
parameter `exist_ok=True` instead of `os.mkdir`.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
- AppData and AppStream can be disabled independently of finding
their requirements (possibly useful if you want to ignore
AppStream even when it's installed in your build environment).
- Add a little top-level documentation about WITH_
- These don't have to be static methods of PackageItem, a free
function is more convenient.
- Since it's not API of PackageItem anymore, need to
- update tests not to use API
- do API-not-available warnings in consumers
- The smallest size image of the default (or, if there is no
default, the first) screenshot is used.
- Remote URLs are not supported by QPixmap, so most will not
load anyway.
- Use *appstream* as key in one of the items for the package-
chooser to load data from the AppStream cache in the system.
- Usable for some applications; for DE-selection not so much.
- Currently unimplemented.
- Put the implementation entirely in a separate file, keep the
not-supported one in PackageModel.cpp (but only in an #ifdef).
- Makes the various optional-data-sources more similar.
- Simplify the iteration by first determining which partitions
are mountable (at all).
- This guards against the very rare case that a partition
does not have a mountPoint at all (the if guarded against that)
where the lambda passed to sort() would get a KeyError.
Instead of having a special case for extra mounts to be processed right
after the rootfs, a better approach is to add them to the partitions
list, and then sort the list by mount point.
This way, we make sure every partition is mounted right when it is
needed: `/` is obviously mounted first, `/run` is mounted before
`/run/udev`, and so on.
The overall process is therefore more generic and should suit all
use-cases.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
- the "Select language" tooltip was applied to the form, so it would
show up inappropriately all over the place
- the buttons didn't have useful tooltips.
- having show*Url and donateUrl seems inconsistent, although
the show*Url settings were originally boolean-only.
- add "show" to the Donate button setting, to make them
all consistent (putting a boolean there will generate a
warning and hide the button, that's all).
- the generic (enum-based) setupButton() can handle all four
of the buttons, so setupLinks() can go away. Only the
(re)translation of the text on the button needs to be
done, so move that to the main RETRANSLATE.
- Handle buttons and their URL-opening in a more
general way with an enum; drop existing three-boot
method and special setupDonateButton()
- Doesn't compile because consumers haven't changed.
As the config files integer are now of type `QVariant::LongLong` instead
of `QVariant::Int`, requirements relying on this type were not parsed
correctly.
This patch fixes this, and adds an option to the python conversion to
take into account `QVariant::LongLong` types.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
When the rootfs partition is read-only, mount points for the other
partitions cannot be created, therefore they need to be created in a
tmpfs, already mounted somewhere in `/`.
However, the extra mounts are only mounted at the end, which causes an
error as no tmpfs is currently mounted.
This patch makes sure all extra mounts are mounted right after the `/`
partition, allowing the use of a read-only rootfs.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
This variable is declared in `if m:`. Of course if this codepath doesn't
run, the variable is not declared an Python doesn't like this kind of
surprise...
Signed-off-by: Arnaud Rebillout <arnaud.rebillout@collabora.com>
- If KPMcore is found -- it requires some other KDE Frameworks but
at least in pre-4.0 versions doesn't check very well for them --
then missing its dependencies is no cause for CMake failure.
Instead, log it nicely and suppress the module.
- calamares_automoc() sets AUTOMOC, but also adds some flags
to avoid compilation warnings from the generated MOC code.
- drop weird hard-coded include paths
- KDE and GNOME selection images were drawn by me for the bogus
package model, and should not be used.
- Keep Calamares logo though, even if it doesn't make much sense
to use it in package selection.
- Keep the no-selection image since it might be used more often,
but it's not very good.
- The ID and Screenshot entries might be weird in AppData (in particular,
a remove URL) so put those back under the control of Calamares even
when using AppData as the source of descriptions.
- Document all the static inline methods that do the work
- Fill up a QVariantMap from <name>, <summary> and <description><p>
elements, and use that to initialize the PackageItem.
- Doing a manual read of the XML, since existing appdata libraries
don't seem to have a convenient entry for what I need.
- Expand tests to loading AppData (currently, they fail).
- Add a FALLTHRU macro to annotate fallthrough situations in both
Clang and GCC,
- Annotate intentional fallthroughs.
- Add missing break which meant that the selection mode was
always multiple-selection.
- Using id's as keys in a map orders them indeterminately -- in
practice, alphabetically by key. Switch to a list form so that
the products stick to the order they have in the config file
(which means distro's can list "preferred" versions at top).
Package chooser is a **low density** package selector -- unlike
netinstall which offers a high density tree view -- for picking
zero, one, or more items from a small collection of packages.
This can be used, e.g., for "pick exactly one desktop environment",
"pick zero or more text editors" which can then be installed
by another module. The UI is big and shiny (rather than netinstall's
text-based tree view) and isn't suitable for more than a dozen or
so items.
- preservefiles generally needs to have the target filesystems
mounted, so that it can preserve to them; but you can also
configure it such that there is no need for mounted filesystems
(e.g. in OEM setup).
- Add an example line in CMakeLists.txt to show how that would be done.
- The mount module must happen before unpackfs because that (mount)
module sets up the root mount point (in /tmp) and some other
variables needed later.
Added new configuration "efiMountOptions" to fstab.conf
When generating the fstab entry for the ESP, take the mount options from
the new configuration or fall back to "mountOptions".
- The mitigations are slightly intrusive, and may clash
with other, similar mitigations (especially for initramfs,
the recommended solution is to configure the system with
the snippet outside of Calamares).
- These tests exercise the createTargetFile() logic,
which is essential for creating a safe initramfs
configuration snippet.
- Could be moved into libcalamares instead, since the tests
are not really initramfs specific.
- This is a simple variation on the theme of things-that-call-a-
initramfs-updater, so the code is mostly a copy of initramfs/
module. I didn't even bother to strip out the configuration-
handling (I figure it might be good for *something*) so now
"" and "$uname" are valid kernel names as well.
- Fixes security issue where the initramfs ends up readable
by all, and that includes the cryptfile for LUKS.
SEE #1190
- Rename classes and functions to be more descriptive
(a LuksDevice is .. information for a LUKS device, for instance).
- Move the smarts of unpacking a QVariantMap to LuksDevice.
- Apply code formatting
- Use 120 seconds for update-initramfs, instead of 10. Previous
Python code had no timeout at all, which wasn't so hot either.
10 seconds, though, is too short for slow CPU & slow disk.
- new implementation handles blank (maps to "all") configuration,
- allows specifying "$uname" as kernel name, to use `uname -r`,
- allows specifying a specific kernel.
- Just read /proc/partitions and process it; split into columns,
add relevant bits.
- This implementation supports devices named "name", which the other
didn't (but that would be really weird).
The tests now pass.
- This is a tiny bit of TDD to replace the existing implementation
(a shell pipeline) with processing inside Calamares.
- The test fails right now, since the implementations are not
the same.
- provide complete information for feature_summary
- set the right API version when building libcalamares
- report the beta version number when it's wrong
- Starting to centralize utility code for partitioning into
libcalamares instead of scattered and weirdly shared between
modules.
- This particular commit breaks compiling the modules, though.
