<?xml version="1.0" ?><!DOCTYPE TS><TS language="pl" version="2.1"> <context> <name>BootInfoWidget</name> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="69"/> <source>The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode.</source> <translation><strong>Środowisko uruchomieniowe</strong> systemu.<br><br>Starsze systemy x86 obsługują tylko <strong>BIOS</strong>.<br>Nowoczesne systemy zwykle używają <strong>EFI</strong>, lecz możliwe jest również ukazanie się BIOS, jeśli działa w trybie kompatybilnym.</translation> </message> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="79"/> <source>This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source> <translation>Ten system został uruchomiony w środowisku rozruchowym <strong>EFI</strong>.<br><br>Aby skonfigurować uruchomienie ze środowiska EFI, instalator musi wdrożyć aplikację programu rozruchowego, takiego jak <strong>GRUB</strong> lub <strong>systemd-boot</strong> na <strong>Partycji Systemu EFI</strong>. Jest to automatyczne, chyba że wybierasz ręczne partycjonowanie, a w takim przypadku musisz wybrać ją lub utworzyć osobiście.</translation> </message> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="91"/> <source>This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source> <translation>Ten system został uruchomiony w środowisku rozruchowym <strong>BIOS</strong>.<br><br>Aby skonfigurować uruchomienie ze środowiska BIOS, instalator musi zainstalować program rozruchowy, taki jak <strong>GRUB</strong> na początku partycji lub w <strong>Głównym Sektorze Rozruchowym</strong> blisko początku tablicy partycji (preferowane). Jest to automatyczne, chyba że wybierasz ręczne partycjonowanie, a w takim przypadku musisz ustawić ją osobiście.</translation> </message> </context> <context> <name>BootLoaderModel</name> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="59"/> <source>Master Boot Record of %1</source> <translation>Master Boot Record %1</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="76"/> <source>Boot Partition</source> <translation>Partycja rozruchowa</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="81"/> <source>System Partition</source> <translation>Partycja systemowa</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="111"/> <source>Do not install a boot loader</source> <translation>Nie instaluj programu rozruchowego</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="125"/> <source>%1 (%2)</source> <translation>%1 (%2)</translation> </message> </context> <context> <name>Calamares::DebugWindow</name> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/> <source>GlobalStorage</source> <translation>Ogólne przechowywanie</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/> <source>JobQueue</source> <translation>Oczekujące zadania</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/> <source>Modules</source> <translation>Moduły</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/> <source>Type:</source> <translation>Rodzaj:</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/> <source>none</source> <translation>brak</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/> <source>Interface:</source> <translation>Interfejs:</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/> <source>Tools</source> <translation>Narzędzia</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="182"/> <source>Debug information</source> <translation>Informacje debugowania</translation> </message> </context> <context> <name>Calamares::ExecutionViewStep</name> <message> <location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="77"/> <source>Install</source> <translation>Zainstaluj</translation> </message> </context> <context> <name>Calamares::JobThread</name> <message> <location filename="../src/libcalamares/JobQueue.cpp" line="86"/> <source>Done</source> <translation>Ukończono</translation> </message> </context> <context> <name>Calamares::ProcessJob</name> <message> <location filename="../src/libcalamares/ProcessJob.cpp" line="51"/> <source>Run command %1 %2</source> <translation>Uruchom polecenie %1 %2</translation> </message> <message> <location filename="../src/libcalamares/ProcessJob.cpp" line="60"/> <source>Running command %1 %2</source> <translation>Wykonywanie polecenia %1 %2</translation> </message> </context> <context> <name>Calamares::PythonJob</name> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="265"/> <source>Running %1 operation.</source> <translation>Wykonuję operację %1.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="280"/> <source>Bad working directory path</source> <translation>Niepoprawna ścieżka katalogu roboczego</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="281"/> <source>Working directory %1 for python job %2 is not readable.</source> <translation>Katalog roboczy %1 dla zadań pythona %2 jest nieosiągalny.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="291"/> <source>Bad main script file</source> <translation>Niepoprawny główny plik skryptu</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="292"/> <source>Main script file %1 for python job %2 is not readable.</source> <translation>Główny plik skryptu %1 dla zadań pythona %2 jest nieczytelny.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="368"/> <source>Boost.Python error in job "%1".</source> <translation>Wystąpił błąd Boost.Python w zadaniu "%1".</translation> </message> </context> <context> <name>Calamares::ViewManager</name> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="73"/> <source>&Back</source> <translation>&Wstecz</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="74"/> <source>&Next</source> <translation>&Dalej</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="75"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="279"/> <source>&Cancel</source> <translation>&Anuluj</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="280"/> <source>Cancel installation without changing the system.</source> <translation>Anuluj instalację bez dokonywania zmian w systemie.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="291"/> <source>Cancel installation?</source> <translation>Anulować instalację?</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="292"/> <source>Do you really want to cancel the current install process? The installer will quit and all changes will be lost.</source> <translation>Czy na pewno chcesz anulować obecny proces instalacji? Instalator zostanie zamknięty i wszystkie zmiany zostaną utracone.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="297"/> <source>&Yes</source> <translation>&Tak</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="298"/> <source>&No</source> <translation>&Nie</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="162"/> <source>&Close</source> <translation>Zam&knij</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="212"/> <source>Continue with setup?</source> <translation>Kontynuować z programem instalacyjnym?</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="213"/> <source>The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong></source> <translation>Instalator %1 zamierza przeprowadzić zmiany na Twoim dysku, aby zainstalować %2.<br/><strong>Nie będziesz mógł cofnąć tych zmian.</strong></translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="218"/> <source>&Install now</source> <translation>&Zainstaluj teraz</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="219"/> <source>Go &back</source> <translation>&Cofnij się</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="248"/> <source>&Done</source> <translation>&Ukończono</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="249"/> <source>The installation is complete. Close the installer.</source> <translation>Instalacja ukończona pomyślnie. Możesz zamknąć instalator.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="159"/> <source>Error</source> <translation>Błąd</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="160"/> <source>Installation Failed</source> <translation>Wystąpił błąd instalacji</translation> </message> </context> <context> <name>CalamaresPython::Helper</name> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="270"/> <source>Unknown exception type</source> <translation>Nieznany rodzaj wyjątku</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="284"/> <source>unparseable Python error</source> <translation>nieparowalny błąd Pythona</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="324"/> <source>unparseable Python traceback</source> <translation>nieparowalny traceback Pythona</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="329"/> <source>Unfetchable Python error.</source> <translation>Nieosiągalny błąd Pythona.</translation> </message> </context> <context> <name>CalamaresWindow</name> <message> <location filename="../src/calamares/CalamaresWindow.cpp" line="44"/> <source>%1 Installer</source> <translation>Instalator %1</translation> </message> <message> <location filename="../src/calamares/CalamaresWindow.cpp" line="111"/> <source>Show debug information</source> <translation>Pokaż informacje debugowania</translation> </message> </context> <context> <name>CheckerWidget</name> <message> <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="96"/> <source>This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a></source> <translation>Ten komputer nie spełnia minimalnych wymagań, niezbędnych do instalacji %1.<br/>Instalacja nie może być kontynuowana. <a href="#details">Szczegóły...</a></translation> </message> <message> <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="113"/> <source>This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.</source> <translation>Ten komputer nie spełnia wszystkich, zalecanych do instalacji %1 wymagań.<br/>Instalacja może być kontynuowana, ale niektóre opcje mogą być niedostępne.</translation> </message> <message> <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="151"/> <source>This program will ask you some questions and set up %2 on your computer.</source> <translation>Ten program zada Ci garść pytań i ustawi %2 na Twoim komputerze.</translation> </message> <message> <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="174"/> <source>For best results, please ensure that this computer:</source> <translation>Dla osiągnięcia najlepszych rezultatów upewnij się, że ten komputer:</translation> </message> <message> <location filename="../src/modules/welcome/checker/CheckerWidget.cpp" line="202"/> <source>System requirements</source> <translation>Wymagania systemowe</translation> </message> </context> <context> <name>ChoicePage</name> <message> <location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="128"/> <source>After:</source> <translation>Po:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="235"/> <source><strong>Manual partitioning</strong><br/>You can create or resize partitions yourself.</source> <translation><strong>Ręczne partycjonowanie</strong><br/>Możesz samodzielnie utworzyć lub zmienić rozmiar istniejących partycji.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="998"/> <source>Boot loader location:</source> <translation>Położenie programu rozruchowego:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="942"/> <source>%1 will be shrunk to %2MB and a new %3MB partition will be created for %4.</source> <translation>%1 zostanie zmniejszony do %2MB a nowa partycja %3MB zostanie utworzona dla %4.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="126"/> <source>Select storage de&vice:</source> <translation>&Wybierz urządzenie przechowywania:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="127"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="924"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="970"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1049"/> <source>Current:</source> <translation>Bieżący:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="795"/> <source>Reuse %1 as home partition for %2.</source> <translation>Użyj ponownie %1 jako partycji domowej dla %2.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="925"/> <source><strong>Select a partition to shrink, then drag the bottom bar to resize</strong></source> <translation><strong>Wybierz partycję do zmniejszenia, a następnie przeciągnij dolny pasek, aby zmienić jej rozmiar</strong></translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1040"/> <source><strong>Select a partition to install on</strong></source> <translation><strong>Wybierz partycję, na której przeprowadzona będzie instalacja</strong></translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1096"/> <source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source> <translation>Nigdzie w tym systemie nie można odnaleźć partycji systemowej EFI. Prosimy się cofnąć i użyć ręcznego partycjonowania dysku do ustawienia %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1105"/> <source>The EFI system partition at %1 will be used for starting %2.</source> <translation>Partycja systemowa EFI na %1 będzie użyta do uruchamiania %2.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1113"/> <source>EFI system partition:</source> <translation>Partycja systemowa EFI:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1200"/> <source>This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>To urządzenie pamięci masowej prawdopodobnie nie posiada żadnego systemu operacyjnego. Co chcesz zrobić?<br/>Będziesz miał możliwość przejrzenia oraz zatwierdzenia swoich ustawień przed wykonaniem jakichkolwiek zmian na tym urządzeniu.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1205"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1242"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1264"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1288"/> <source><strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device.</source> <translation><strong>Wyczyść dysk</strong><br/>Ta operacja <font color="red">usunie</font> wszystkie dane obecnie znajdujące się na wybranym urządzeniu przechowywania.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1232"/> <source>This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>To urządzenie pamięci masowej posiada %1. Co chcesz zrobić?<br/>Będziesz miał możliwość przejrzenia oraz zatwierdzenia swoich ustawień przed wykonaniem jakichkolwiek zmian na tym urządzeniu.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1209"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1238"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1260"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1284"/> <source><strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1.</source> <translation><strong>Zainstaluj obok siebie</strong><br/>Instalator zmniejszy partycję, aby zrobić miejsce dla %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1213"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1247"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1268"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1292"/> <source><strong>Replace a partition</strong><br/>Replaces a partition with %1.</source> <translation><strong>Zastąp partycję</strong><br/>Zastępowanie partycji poprzez %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1255"/> <source>This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>To urządzenie pamięci masowej posiada już system operacyjny. Co chcesz zrobić?<br/>Będziesz miał możliwość przejrzenia oraz zatwierdzenia swoich ustawień przed wykonaniem jakichkolwiek zmian na tym urządzeniu.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1279"/> <source>This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>To urządzenie pamięci masowej posiada kilka systemów operacyjnych. Co chcesz zrobić?<br/>Będziesz miał możliwość przejrzenia oraz zatwierdzenia swoich ustawień przed wykonaniem jakichkolwiek zmian na tym urządzeniu.</translation> </message> </context> <context> <name>ClearMountsJob</name> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="45"/> <source>Clear mounts for partitioning operations on %1</source> <translation>Wyczyść zamontowania dla operacji partycjonowania na %1</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="53"/> <source>Clearing mounts for partitioning operations on %1.</source> <translation>Czyszczenie montowań dla operacji partycjonowania na %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="190"/> <source>Cleared all mounts for %1</source> <translation>Wyczyszczono wszystkie zamontowania dla %1</translation> </message> </context> <context> <name>ClearTempMountsJob</name> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/> <source>Clear all temporary mounts.</source> <translation>Wyczyść wszystkie tymczasowe montowania.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/> <source>Clearing all temporary mounts.</source> <translation>Usuwanie wszystkich tymczasowych punktów montowania.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/> <source>Cannot get list of temporary mounts.</source> <translation>Nie można uzyskać listy tymczasowych montowań.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/> <source>Cleared all temporary mounts.</source> <translation>Wyczyszczono wszystkie tymczasowe montowania.</translation> </message> </context> <context> <name>CommandList</name> <message> <location filename="../src/libcalamares/utils/CommandList.cpp" line="113"/> <source>Could not run command.</source> <translation>Nie można wykonać polecenia.</translation> </message> <message> <location filename="../src/libcalamares/utils/CommandList.cpp" line="114"/> <source>No rootMountPoint is defined, so command cannot be run in the target environment.</source> <translation>Nie określono rootMountPoint, więc polecenie nie może zostać wykonane w docelowym środowisku.</translation> </message> </context> <context> <name>ContextualProcessJob</name> <message> <location filename="../src/modules/contextualprocess/ContextualProcessJob.cpp" line="75"/> <source>Contextual Processes Job</source> <translation type="unfinished"/> </message> </context> <context> <name>CreatePartitionDialog</name> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/> <source>Create a Partition</source> <translation>Utwórz partycję</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/> <source> MiB</source> <translation>MB</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/> <source>Partition &Type:</source> <translation>Rodzaj par&tycji:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/> <source>&Primary</source> <translation>&Podstawowa</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/> <source>E&xtended</source> <translation>Ro&zszerzona</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/> <source>Fi&le System:</source> <translation>System p&lików:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/> <source>LVM LV name</source> <translation>Nazwa LV LVM</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="188"/> <source>Flags:</source> <translation>Flagi:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="161"/> <source>&Mount Point:</source> <translation>Punkt &montowania:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/> <source>Si&ze:</source> <translation>Ro&zmiar:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="68"/> <source>En&crypt</source> <translation>Zaszy%fruj</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="177"/> <source>Logical</source> <translation>Logiczna</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="182"/> <source>Primary</source> <translation>Podstawowa</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="199"/> <source>GPT</source> <translation>GPT</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="288"/> <source>Mountpoint already in use. Please select another one.</source> <translation>Punkt montowania jest już używany. Proszę wybrać inny.</translation> </message> </context> <context> <name>CreatePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="44"/> <source>Create new %2MB partition on %4 (%3) with file system %1.</source> <translation>Utwórz nową partycję %2MB na %4 (%3) z systemem plików %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="55"/> <source>Create new <strong>%2MB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>.</source> <translation>Utwórz nową partycję <strong>%2MB</strong> na <strong>%4</strong> (%3) z systemem plików <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="67"/> <source>Creating new %1 partition on %2.</source> <translation>Tworzenie nowej partycji %1 na %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="79"/> <source>The installer failed to create partition on disk '%1'.</source> <translation>Instalator nie mógł utworzyć partycji na dysku '%1'.</translation> </message> </context> <context> <name>CreatePartitionTableDialog</name> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/> <source>Create Partition Table</source> <translation>Utwórz tablicę partycji</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/> <source>Creating a new partition table will delete all existing data on the disk.</source> <translation>Utworzenie nowej tablicy partycji usunie wszystkie istniejące na dysku dane.</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/> <source>What kind of partition table do you want to create?</source> <translation>Jaki rodzaj tablicy partycji chcesz utworzyć?</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/> <source>Master Boot Record (MBR)</source> <translation>Master Boot Record (MBR)</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/> <source>GUID Partition Table (GPT)</source> <translation>Tablica partycji GUID (GPT)</translation> </message> </context> <context> <name>CreatePartitionTableJob</name> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="45"/> <source>Create new %1 partition table on %2.</source> <translation>Utwórz nową tablicę partycję %1 na %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="52"/> <source>Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3).</source> <translation>Utwórz nową tabelę partycji <strong>%1</strong> na <strong>%2</strong> (%3).</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="62"/> <source>Creating new %1 partition table on %2.</source> <translation>Tworzenie nowej tablicy partycji %1 na %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="72"/> <source>The installer failed to create a partition table on %1.</source> <translation>Instalator nie mógł utworzyć tablicy partycji na %1.</translation> </message> </context> <context> <name>CreateUserJob</name> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="50"/> <source>Create user %1</source> <translation>Utwórz użytkownika %1</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="57"/> <source>Create user <strong>%1</strong>.</source> <translation>Utwórz użytkownika <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="64"/> <source>Creating user %1.</source> <translation>Tworzenie użytkownika %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="80"/> <source>Sudoers dir is not writable.</source> <translation>Katalog sudoers nie ma prawa do zapisu.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="84"/> <source>Cannot create sudoers file for writing.</source> <translation>Nie można utworzyć pliku sudoers z możliwością zapisu.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="92"/> <source>Cannot chmod sudoers file.</source> <translation>Nie można wykonać chmod na pliku sudoers.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="98"/> <source>Cannot open groups file for reading.</source> <translation>Nie można otworzyć pliku groups do odczytu.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="159"/> <source>Cannot create user %1.</source> <translation>Nie można utworzyć użytkownika %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="161"/> <source>useradd terminated with error code %1.</source> <translation>Polecenie useradd zostało przerwane z kodem błędu %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="170"/> <source>Cannot add user %1 to groups: %2.</source> <translation>Nie można dodać użytkownika %1 do grup: %2</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="173"/> <source>usermod terminated with error code %1.</source> <translation>usermod zakończony z kodem błędu %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="183"/> <source>Cannot set home directory ownership for user %1.</source> <translation>Nie można ustawić właściciela katalogu domowego dla użytkownika %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="185"/> <source>chown terminated with error code %1.</source> <translation>Polecenie chown zostało przerwane z kodem błędu %1.</translation> </message> </context> <context> <name>DeletePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="40"/> <source>Delete partition %1.</source> <translation>Usuń partycję %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="48"/> <source>Delete partition <strong>%1</strong>.</source> <translation>Usuń partycję <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="56"/> <source>Deleting partition %1.</source> <translation>Usuwanie partycji %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/> <source>The installer failed to delete partition %1.</source> <translation>Instalator nie mógł usunąć partycji %1.</translation> </message> </context> <context> <name>DeviceInfoWidget</name> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="150"/> <source>The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred.</source> <translation>Typ <strong>tabeli partycji</strong> na zaznaczonym nośniku danych.<br><br>Jedyną metodą na zmianę tabeli partycji jest jej wyczyszczenie i utworzenie jej od nowa, co spowoduje utratę wszystkich danych.<br>Ten instalator zachowa obecną tabelę partycji, jeżeli nie wybierzesz innej opcji.<br>W wypadku niepewności, w nowszych systemach zalecany jest GPT.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="107"/> <source>This device has a <strong>%1</strong> partition table.</source> <translation>To urządzenie ma <strong>%1</strong> tablicę partycji.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="114"/> <source>This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source> <translation>To jest urządzenie <strong>pętli zwrotnej</strong>. To jest pseudo-urządzenie, które nie posiada tabeli partycji, która czyni plik dostępny jako urządzenie blokowe. Ten rodzaj instalacji zwykle zawiera tylko jeden system plików.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="121"/> <source>This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source> <translation>Instalator <strong>nie mógł znaleźć tabeli partycji</strong> na zaznaczonym nośniku danych.<br><br>Urządzenie nie posiada tabeli partycji bądź jest ona uszkodzona lub nieznanego rodzaju.<br>Instalator może utworzyć dla Ciebie nową tabelę partycji automatycznie, lub możesz uczynić to ręcznie.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="131"/> <source><br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment.</source> <translation><br><br>Zalecany rodzaj tabeli partycji dla nowoczesnych systemów uruchamianych przez <strong>EFI</strong>.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="137"/> <source><br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions.</source> <translation><br><br>Ten rodzaj tabeli partycji jest zalecany tylko dla systemów uruchamianych ze środowiska uruchomieniowego <strong>BIOS</strong>. GPT jest zalecane w większości innych wypadków.<br><br><strong>Ostrzeżenie:</strong> tabele partycji MBR są przestarzałym standardem z ery MS-DOS.<br>Możesz posiadać tylko 4 partycje <em>podstawowe</em>, z których jedna może być partycją <em>rozszerzoną</em>, zawierającą wiele partycji <em>logicznych</em>.</translation> </message> </context> <context> <name>DeviceModel</name> <message> <location filename="../src/modules/partition/core/DeviceModel.cpp" line="80"/> <source>%1 - %2 (%3)</source> <translation>%1 - %2 (%3)</translation> </message> </context> <context> <name>DracutLuksCfgJob</name> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/> <source>Write LUKS configuration for Dracut to %1</source> <translation>Zapisz konfigurację LUKS dla Dracut do %1</translation> </message> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/> <source>Skip writing LUKS configuration for Dracut: "/" partition is not encrypted</source> <translation>Pominięto zapisywanie konfiguracji LUKS dla Dracut: partycja "/" nie jest szyfrowana</translation> </message> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/> <source>Failed to open %1</source> <translation>Nie udało się otworzyć %1</translation> </message> </context> <context> <name>DummyCppJob</name> <message> <location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="46"/> <source>Dummy C++ Job</source> <translation>Działanie obiektu Dummy C++</translation> </message> </context> <context> <name>EditExistingPartitionDialog</name> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/> <source>Edit Existing Partition</source> <translation>Edycja istniejącej partycji</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/> <source>Content:</source> <translation>Zawartość:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/> <source>&Keep</source> <translation>&Zachowaj</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/> <source>Format</source> <translation>Sformatuj</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/> <source>Warning: Formatting the partition will erase all existing data.</source> <translation>Ostrzeżenie: Sformatowanie partycji wymaże wszystkie istniejące na niej dane.</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/> <source>&Mount Point:</source> <translation>Punkt &montowania:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/> <source>Si&ze:</source> <translation>Ro&zmiar:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/> <source> MiB</source> <translation> MB</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/> <source>Fi&le System:</source> <translation>System p&lików:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/> <source>Flags:</source> <translation>Flagi:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="307"/> <source>Mountpoint already in use. Please select another one.</source> <translation>Punkt montowania jest już używany. Proszę wybrać inny.</translation> </message> </context> <context> <name>EncryptWidget</name> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/> <source>En&crypt system</source> <translation>Zaszy&fruj system</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/> <source>Passphrase</source> <translation>Hasło</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/> <source>Confirm passphrase</source> <translation>Potwierdź hasło</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/> <source>Please enter the same passphrase in both boxes.</source> <translation>Użyj tego samego hasła w obu polach.</translation> </message> </context> <context> <name>FillGlobalStorageJob</name> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="123"/> <source>Set partition information</source> <translation>Ustaw informacje partycji</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="147"/> <source>Install %1 on <strong>new</strong> %2 system partition.</source> <translation>Zainstaluj %1 na <strong>nowej</strong> partycji systemowej %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="151"/> <source>Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>.</source> <translation>Ustaw <strong>nową</strong> partycję %2 z punktem montowania <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="159"/> <source>Install %2 on %3 system partition <strong>%1</strong>.</source> <translation>Zainstaluj %2 na partycji systemowej %3 <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="164"/> <source>Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>.</source> <translation>Ustaw partycję %3 <strong>%1</strong> z punktem montowania <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="176"/> <source>Install boot loader on <strong>%1</strong>.</source> <translation>Zainstaluj program rozruchowy na <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="186"/> <source>Setting up mount points.</source> <translation>Ustawianie punktów montowania.</translation> </message> </context> <context> <name>FinishedPage</name> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="14"/> <source>Form</source> <translation>Form</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="95"/> <source><html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style=" font-style:italic;">Done</span> or close the installer.</p></body></html></source> <translation><html><head/><body><p>Gdy to pole jest zaznaczone, system uruchomi się ponownie, gdy klikniesz <span style=" font-style:italic;">Wykonano</span> lub zamkniesz instalator.</p></body></html></translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="98"/> <source>&Restart now</source> <translation>&Uruchom ponownie teraz</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="52"/> <source><h1>All done.</h1><br/>%1 has been installed on your computer.<br/>You may now restart into your new system, or continue using the %2 Live environment.</source> <translation><h1>Wszystko gotowe.</h1><br/>%1 został zainstalowany na Twoim komputerze.<br/>Możesz teraz ponownie uruchomić komputer, aby przejść do nowego systemu, albo kontynuować używanie środowiska live %2.</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="110"/> <source><h1>Installation Failed</h1><br/>%1 has not been installed on your computer.<br/>The error message was: %2.</source> <translation><h1>Instalacja nie powiodła się</h1><br/>Nie udało się zainstalować %1 na Twoim komputerze.<br/>Komunikat o błędzie: %2.</translation> </message> </context> <context> <name>FinishedViewStep</name> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="59"/> <source>Finish</source> <translation>Koniec</translation> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="124"/> <source>Installation Complete</source> <translation>Instalacja zakończona</translation> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="125"/> <source>The installation of %1 is complete.</source> <translation>Instalacja %1 ukończyła się pomyślnie.</translation> </message> </context> <context> <name>FormatPartitionJob</name> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="41"/> <source>Format partition %1 (file system: %2, size: %3 MB) on %4.</source> <translation>Formatuj partycję %1 (system plików: %2, rozmiar: %3 MB) na %4.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="52"/> <source>Format <strong>%3MB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>.</source> <translation>Sformatuj partycję <strong>%3MB</strong> <strong>%1</strong> z systemem plików <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="63"/> <source>Formatting partition %1 with file system %2.</source> <translation>Formatowanie partycji %1 z systemem plików %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="77"/> <source>The installer failed to format partition %1 on disk '%2'.</source> <translation>Instalator nie mógł sformatować partycji %1 na dysku '%2'.</translation> </message> </context> <context> <name>InteractiveTerminalPage</name> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="53"/> <source>Konsole not installed</source> <translation>Konsole jest niezainstalowany</translation> </message> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="54"/> <source>Please install KDE Konsole and try again!</source> <translation>Zainstaluj KDE Konsole i spróbuj ponownie!</translation> </message> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="116"/> <source>Executing script: &nbsp;<code>%1</code></source> <translation>Wykonywanie skryptu: &nbsp;<code>%1</code></translation> </message> </context> <context> <name>InteractiveTerminalViewStep</name> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/> <source>Script</source> <translation>Skrypt</translation> </message> </context> <context> <name>KeyboardPage</name> <message> <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="220"/> <source>Set keyboard model to %1.<br/></source> <translation>Ustaw model klawiatury na %1.<br/></translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="222"/> <source>Set keyboard layout to %1/%2.</source> <translation>Ustaw model klawiatury na %1/%2.</translation> </message> </context> <context> <name>KeyboardViewStep</name> <message> <location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/> <source>Keyboard</source> <translation>Klawiatura</translation> </message> </context> <context> <name>LCLocaleDialog</name> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/> <source>System locale setting</source> <translation>Systemowe ustawienia lokalne</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/> <source>The system locale setting affects the language and character set for some command line user interface elements.<br/>The current setting is <strong>%1</strong>.</source> <translation>Systemowe ustawienia lokalne wpływają na ustawienia języka i znaków w niektórych elementach wiersza poleceń interfejsu użytkownika.<br/>Bieżące ustawienie to <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/> <source>&Cancel</source> <translation>&Anuluj</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/> <source>&OK</source> <translation>&OK</translation> </message> </context> <context> <name>LicensePage</name> <message> <location filename="../src/modules/license/LicensePage.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="88"/> <source>I accept the terms and conditions above.</source> <translation>Akceptuję powyższe warunki korzystania.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="115"/> <source><h1>License Agreement</h1>This setup procedure will install proprietary software that is subject to licensing terms.</source> <translation><h1>Umowy licencyjne</h1>Ten etap instalacji zainstaluje własnościowe oprogramowanie, którego dotyczą zasady licencji.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="118"/> <source>Please review the End User License Agreements (EULAs) above.<br/>If you do not agree with the terms, the setup procedure cannot continue.</source> <translation>Przeczytaj znajdujące się poniżej Umowy Licencyjne Końcowego Użytkownika (EULA).<br/>Jeżeli nie zgadzasz się z tymi warunkami, nie możesz kontynuować.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="124"/> <source><h1>License Agreement</h1>This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source> <translation><h1>Umowy licencyjne</h1>Ten etap instalacji pozwoli zainstalować własnościowe oprogramowanie, którego dotyczą zasady licencji w celu poprawienia doświadczenia i zapewnienia dodatkowych funkcji.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="129"/> <source>Please review the End User License Agreements (EULAs) above.<br/>If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source> <translation>Przeczytaj znajdujące się poniżej Umowy Licencyjne Końcowego Użytkownika (EULA).<br/>Jeżeli nie zaakceptujesz tych warunków, własnościowe oprogramowanie nie zostanie zainstalowane, zamiast tego zostaną użyte otwartoźródłowe odpowiedniki.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="159"/> <source><strong>%1 driver</strong><br/>by %2</source> <extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment> <translation><strong>sterownik %1</strong><br/>autorstwa %2</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="166"/> <source><strong>%1 graphics driver</strong><br/><font color="Grey">by %2</font></source> <extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment> <translation><strong>sterownik graficzny %1</strong><br/><font color="Grey">autorstwa %2</font></translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="172"/> <source><strong>%1 browser plugin</strong><br/><font color="Grey">by %2</font></source> <translation><strong>wtyczka do przeglądarki %1</strong><br/><font color="Grey">autorstwa %2</font></translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="178"/> <source><strong>%1 codec</strong><br/><font color="Grey">by %2</font></source> <translation><strong>kodek %1</strong><br/><font color="Grey">autorstwa %2</font></translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="184"/> <source><strong>%1 package</strong><br/><font color="Grey">by %2</font></source> <translation><strong>pakiet %1</strong><br/><font color="Grey">autorstwa %2</font></translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="190"/> <source><strong>%1</strong><br/><font color="Grey">by %2</font></source> <translation><strong>%1</strong><br/><font color="Grey">autorstwa %2</font></translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="202"/> <source><a href="%1">view license agreement</a></source> <translation><a href="%1">zobacz porozumienie licencyjne</a></translation> </message> </context> <context> <name>LicenseViewStep</name> <message> <location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/> <source>License</source> <translation>Licencja</translation> </message> </context> <context> <name>LocalePage</name> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="387"/> <source>The system language will be set to %1.</source> <translation>Język systemu zostanie ustawiony na %1.</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="389"/> <source>The numbers and dates locale will be set to %1.</source> <translation>Format liczb i daty zostanie ustawiony na %1.</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="215"/> <source>Region:</source> <translation>Region:</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="216"/> <source>Zone:</source> <translation>Strefa:</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="220"/> <location filename="../src/modules/locale/LocalePage.cpp" line="221"/> <source>&Change...</source> <translation>&Zmień...</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="398"/> <source>Set timezone to %1/%2.<br/></source> <translation>Ustaw strefę czasową na %1/%2.<br/></translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="480"/> <source>%1 (%2)</source> <extracomment>Language (Country)</extracomment> <translation>%1 (%2)</translation> </message> </context> <context> <name>LocaleViewStep</name> <message> <location filename="../src/modules/locale/LocaleViewStep.cpp" line="52"/> <source>Loading location data...</source> <translation>Wczytywanie danych położenia</translation> </message> <message> <location filename="../src/modules/locale/LocaleViewStep.cpp" line="169"/> <source>Location</source> <translation>Położenie</translation> </message> </context> <context> <name>NetInstallPage</name> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="72"/> <source>Name</source> <translation>Nazwa</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="73"/> <source>Description</source> <translation>Opis</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="94"/> <source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source> <translation>Instalacja sieciowa. (Wyłączona: Nie można pobrać listy pakietów, sprawdź swoje połączenie z siecią)</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="104"/> <source>Network Installation. (Disabled: Received invalid groups data)</source> <translation>Instalacja sieciowa. (Niedostępna: Otrzymano nieprawidłowe dane grupowe)</translation> </message> </context> <context> <name>NetInstallViewStep</name> <message> <location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="52"/> <source>Package selection</source> <translation>Wybór pakietów</translation> </message> </context> <context> <name>PWQ</name> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="67"/> <source>Password is too short</source> <translation>Hasło jest zbyt krótkie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="89"/> <source>Password is too long</source> <translation>Hasło jest zbyt długie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="155"/> <source>Password is too weak</source> <translation>Hasło jest zbyt słabe</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="162"/> <source>Memory allocation error when setting '%1'</source> <translation>Wystąpił błąd przydzielania pamięci przy ustawieniu '%1'</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="166"/> <source>Memory allocation error</source> <translation>Błąd przydzielania pamięci</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="168"/> <source>The password is the same as the old one</source> <translation>Hasło jest takie samo jak poprzednie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="170"/> <source>The password is a palindrome</source> <translation>Hasło jest palindromem</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="172"/> <source>The password differs with case changes only</source> <translation>Hasła różnią się tylko wielkością znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="174"/> <source>The password is too similar to the old one</source> <translation>Hasło jest zbyt podobne do poprzedniego</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="176"/> <source>The password contains the user name in some form</source> <translation>Hasło zawiera nazwę użytkownika</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="178"/> <source>The password contains words from the real name of the user in some form</source> <translation>Hasło zawiera fragment pełnej nazwy użytkownika</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="180"/> <source>The password contains forbidden words in some form</source> <translation>Hasło zawiera jeden z niedozwolonych wyrazów</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="183"/> <source>The password contains less than %1 digits</source> <translation>Hasło składa się z mniej niż %1 znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="184"/> <source>The password contains too few digits</source> <translation>Hasło zawiera zbyt mało znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="187"/> <source>The password contains less than %1 uppercase letters</source> <translation>Hasło składa się z mniej niż %1 wielkich liter</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="188"/> <source>The password contains too few uppercase letters</source> <translation>Hasło zawiera zbyt mało wielkich liter</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="191"/> <source>The password contains less than %1 lowercase letters</source> <translation>Hasło składa się z mniej niż %1 małych liter</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="192"/> <source>The password contains too few lowercase letters</source> <translation>Hasło zawiera zbyt mało małych liter</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="195"/> <source>The password contains less than %1 non-alphanumeric characters</source> <translation>Hasło składa się z mniej niż %1 znaków niealfanumerycznych</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="196"/> <source>The password contains too few non-alphanumeric characters</source> <translation>Hasło zawiera zbyt mało znaków niealfanumerycznych</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="199"/> <source>The password is shorter than %1 characters</source> <translation>Hasło zawiera mniej niż %1 znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="200"/> <source>The password is too short</source> <translation>Hasło jest zbyt krótkie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="202"/> <source>The password is just rotated old one</source> <translation>Hasło jest odwróceniem poprzedniego</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="205"/> <source>The password contains less than %1 character classes</source> <translation>Hasło składa się z mniej niż %1 rodzajów znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="206"/> <source>The password does not contain enough character classes</source> <translation>Hasło zawiera zbyt mało rodzajów znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="209"/> <source>The password contains more than %1 same characters consecutively</source> <translation>Hasło zawiera ponad %1 powtarzających się tych samych znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="210"/> <source>The password contains too many same characters consecutively</source> <translation>Hasło zawiera zbyt wiele powtarzających się znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="213"/> <source>The password contains more than %1 characters of the same class consecutively</source> <translation>Hasło zawiera więcej niż %1 znaków tego samego rodzaju</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="214"/> <source>The password contains too many characters of the same class consecutively</source> <translation>Hasło składa się ze zbyt wielu znaków tego samego rodzaju</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="217"/> <source>The password contains monotonic sequence longer than %1 characters</source> <translation>Hasło zawiera jednakowy ciąg dłuższy niż %1 znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="218"/> <source>The password contains too long of a monotonic character sequence</source> <translation>Hasło zawiera zbyt długi ciąg jednakowych znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="220"/> <source>No password supplied</source> <translation>Nie podano hasła</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="222"/> <source>Cannot obtain random numbers from the RNG device</source> <translation>Nie można uzyskać losowych znaków z urządzenia RNG</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="224"/> <source>Password generation failed - required entropy too low for settings</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="229"/> <source>The password fails the dictionary check - %1</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="231"/> <source>The password fails the dictionary check</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="235"/> <source>Unknown setting - %1</source> <translation>Nieznane ustawienie - %1</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="239"/> <source>Unknown setting</source> <translation>Nieznane ustawienie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="243"/> <source>Bad integer value of setting - %1</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="247"/> <source>Bad integer value</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="251"/> <source>Setting %1 is not of integer type</source> <translation>Ustawienie %1 nie jest liczbą całkowitą</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="255"/> <source>Setting is not of integer type</source> <translation>Ustawienie nie jest liczbą całkowitą</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="259"/> <source>Setting %1 is not of string type</source> <translation>Ustawienie %1 nie jest ciągiem znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="263"/> <source>Setting is not of string type</source> <translation>Ustawienie nie jest ciągiem znaków</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="265"/> <source>Opening the configuration file failed</source> <translation>Nie udało się otworzyć pliku konfiguracyjnego</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="267"/> <source>The configuration file is malformed</source> <translation>Plik konfiguracyjny jest uszkodzony</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="269"/> <source>Fatal failure</source> <translation>Krytyczne niepowodzenie</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="271"/> <source>Unknown error</source> <translation>Nieznany błąd</translation> </message> </context> <context> <name>Page_Keyboard</name> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/> <source>Form</source> <translation>Form</translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/> <source>Keyboard Model:</source> <translation>Model klawiatury:</translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/> <source>Type here to test your keyboard</source> <translation>Napisz coś tutaj, aby sprawdzić swoją klawiaturę</translation> </message> </context> <context> <name>Page_UserSetup</name> <message> <location filename="../src/modules/users/page_usersetup.ui" line="14"/> <source>Form</source> <translation>Form</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="36"/> <source>What is your name?</source> <translation>Jak się nazywasz?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="117"/> <source>What name do you want to use to log in?</source> <translation>Jakiego imienia chcesz używać do logowania się?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="306"/> <location filename="../src/modules/users/page_usersetup.ui" line="437"/> <location filename="../src/modules/users/page_usersetup.ui" line="582"/> <source>font-weight: normal</source> <translation>font-weight: normal</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="200"/> <source><small>If more than one person will use this computer, you can set up multiple accounts after installation.</small></source> <translation><small>Jeśli więcej niż jedna osoba będzie używać tego komputera, możesz utworzyć więcej kont już po instalacji.</small></translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="335"/> <source>Choose a password to keep your account safe.</source> <translation>Wybierz hasło, aby chronić swoje konto.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="440"/> <source><small>Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.</small></source> <translation><small>Wpisz swoje hasło dwa razy, aby mieć pewność, że uniknąłeś literówek. Dobre hasło powinno zawierać mieszaninę liter, cyfr, znaków specjalnych; mieć przynajmniej 8 znaków i być regularnie zmieniane.</small></translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="226"/> <source>What is the name of this computer?</source> <translation>Jaka jest nazwa tego komputera?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="309"/> <source><small>This name will be used if you make the computer visible to others on a network.</small></source> <translation><small>Ta nazwa będzie używana, jeśli udostępnisz swój komputer w sieci.</small></translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="450"/> <source>Log in automatically without asking for the password.</source> <translation>Zaloguj automatycznie bez proszenia o hasło.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="457"/> <source>Use the same password for the administrator account.</source> <translation>Użyj tego samego hasła dla konta administratora.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="480"/> <source>Choose a password for the administrator account.</source> <translation>Wybierz hasło do konta administratora.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="585"/> <source><small>Enter the same password twice, so that it can be checked for typing errors.</small></source> <translation><small>Wpisz to samo hasło dwa razy, aby mieć pewność, że uniknąłeś literówek.</small></translation> </message> </context> <context> <name>PartitionLabelsView</name> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="193"/> <source>Root</source> <translation>Systemowa</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="196"/> <source>Home</source> <translation>Domowa</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="198"/> <source>Boot</source> <translation>Rozruchowa</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="201"/> <source>EFI system</source> <translation>System EFI</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="203"/> <source>Swap</source> <translation>Przestrzeń wymiany</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/> <source>New partition for %1</source> <translation>Nowa partycja dla %1</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/> <source>New partition</source> <translation>Nowa partycja</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="224"/> <source>%1 %2</source> <translation>%1 %2</translation> </message> </context> <context> <name>PartitionModel</name> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="137"/> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="169"/> <source>Free Space</source> <translation>Wolna powierzchnia</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="141"/> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="173"/> <source>New partition</source> <translation>Nowa partycja</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="257"/> <source>Name</source> <translation>Nazwa</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="259"/> <source>File System</source> <translation>System plików</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="261"/> <source>Mount Point</source> <translation>Punkt montowania</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="263"/> <source>Size</source> <translation>Rozmiar</translation> </message> </context> <context> <name>PartitionPage</name> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/> <source>Form</source> <translation>Form</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/> <source>Storage de&vice:</source> <translation>Urządzenie przecho&wywania:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/> <source>&Revert All Changes</source> <translation>P&rzywróć do pierwotnego stanu</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/> <source>New Partition &Table</source> <translation>Nowa &tablica partycji</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/> <source>&Create</source> <translation>&Utwórz</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/> <source>&Edit</source> <translation>&Edycja</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/> <source>&Delete</source> <translation>U&suń</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="148"/> <source>Install boot &loader on:</source> <translation>Zainsta&luj program rozruchowy na:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="168"/> <source>Are you sure you want to create a new partition table on %1?</source> <translation>Czy na pewno chcesz utworzyć nową tablicę partycji na %1?</translation> </message> </context> <context> <name>PartitionViewStep</name> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="70"/> <source>Gathering system information...</source> <translation>Zbieranie informacji o systemie...</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="121"/> <source>Partitions</source> <translation>Partycje</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="158"/> <source>Install %1 <strong>alongside</strong> another operating system.</source> <translation>Zainstaluj %1 <strong>obok</strong> innego systemu operacyjnego.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="162"/> <source><strong>Erase</strong> disk and install %1.</source> <translation><strong>Wyczyść</strong> dysk i zainstaluj %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="166"/> <source><strong>Replace</strong> a partition with %1.</source> <translation><strong>Zastąp</strong> partycję poprzez %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="171"/> <source><strong>Manual</strong> partitioning.</source> <translation><strong>Ręczne</strong> partycjonowanie.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="184"/> <source>Install %1 <strong>alongside</strong> another operating system on disk <strong>%2</strong> (%3).</source> <translation>Zainstaluj %1 <strong>obok</strong> innego systemu operacyjnego na dysku <strong>%2</strong> (%3).</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="190"/> <source><strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1.</source> <translation><strong>Wyczyść</strong> dysk <strong>%2</strong> (%3) i zainstaluj %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="196"/> <source><strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1.</source> <translation><strong>Zastąp</strong> partycję na dysku <strong>%2</strong> (%3) poprzez %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="203"/> <source><strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2).</source> <translation><strong>Ręczne</strong> partycjonowanie na dysku <strong>%1</strong> (%2).</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="211"/> <source>Disk <strong>%1</strong> (%2)</source> <translation>Dysk <strong>%1</strong> (%2)</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="239"/> <source>Current:</source> <translation>Bieżący:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="256"/> <source>After:</source> <translation>Po:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="399"/> <source>No EFI system partition configured</source> <translation>Nie skonfigurowano partycji systemowej EFI</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="400"/> <source>An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a FAT32 filesystem with the <strong>esp</strong> flag enabled and mount point <strong>%2</strong>.<br/><br/>You can continue without setting up an EFI system partition but your system may fail to start.</source> <translation>Partycja systemu EFI jest zalecana aby rozpocząć %1.<br/><br/>Aby ją skonfigurować, wróć i wybierz lub utwórz partycję z systemem plików FAT32 i flagą <strong>esp</strong> o punkcie montowania <strong>%2</strong>.<br/><br/>Możesz kontynuować bez ustawiania partycji systemu EFI, ale twój system może nie uruchomić się.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="413"/> <source>EFI system partition flag not set</source> <translation>Flaga partycji systemowej EFI nie została ustawiona</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="414"/> <source>An EFI system partition is necessary to start %1.<br/><br/>A partition was configured with mount point <strong>%2</strong> but its <strong>esp</strong> flag is not set.<br/>To set the flag, go back and edit the partition.<br/><br/>You can continue without setting the flag but your system may fail to start.</source> <translation>Partycja systemu EFI jest konieczna, aby rozpocząć %1.<br/><br/>Partycja została skonfigurowana w punkcie montowania <strong>%2</strong>, ale nie została ustawiona flaga <strong>esp</strong>. Aby ustawić tę flagę, wróć i zmodyfikuj tę partycję.<br/><br/>Możesz kontynuować bez ustawienia tej flagi, ale Twój system może się nie uruchomić.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="448"/> <source>Boot partition not encrypted</source> <translation>Niezaszyfrowana partycja rozruchowa</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="449"/> <source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window.</source> <translation>Oddzielna partycja rozruchowa została skonfigurowana razem z zaszyfrowaną partycją roota, ale partycja rozruchowa nie jest szyfrowana.<br/><br/>Nie jest to najbezpieczniejsze rozwiązanie, ponieważ ważne pliki systemowe znajdują się na niezaszyfrowanej partycji.<br/>Możesz kontynuować, ale odblokowywanie systemu nastąpi później, w trakcie uruchamiania.<br/>Aby zaszyfrować partycję rozruchową, wróć i utwórz ją ponownie zaznaczając opcję <strong>Szyfruj</strong> w oknie tworzenia partycji.</translation> </message> </context> <context> <name>PlasmaLnfJob</name> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="41"/> <source>Plasma Look-and-Feel Job</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="73"/> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="74"/> <source>Could not select KDE Plasma Look-and-Feel package</source> <translation type="unfinished"/> </message> </context> <context> <name>PlasmaLnfPage</name> <message> <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="20"/> <source>Placeholder</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="64"/> <source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed.</source> <translation>Zainstaluj motyw pulpitu KDE Plazmy. Możesz pominąć ten krok i wybrać, jak będzie wyglądał Twój system po zakończeniu instalacji.</translation> </message> </context> <context> <name>PlasmaLnfViewStep</name> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfViewStep.cpp" line="51"/> <source>Look-and-Feel</source> <translation type="unfinished"/> </message> </context> <context> <name>ProcessResult</name> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="263"/> <source> There was no output from the command.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="264"/> <source> Output: </source> <translation> Wyjście: </translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="267"/> <source>External command crashed.</source> <translation>Zewnętrzne polecenie zakończone niepowodzeniem.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="268"/> <source>Command <i>%1</i> crashed.</source> <translation>Wykonanie polecenia <i>%1</i> nie powiodło się.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="273"/> <source>External command failed to start.</source> <translation>Nie udało się uruchomić zewnętrznego polecenia.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="274"/> <source>Command <i>%1</i> failed to start.</source> <translation>Polecenie <i>%1</i> nie zostało uruchomione.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="278"/> <source>Internal error when starting command.</source> <translation>Wystąpił wewnętrzny błąd podczas uruchamiania polecenia.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="279"/> <source>Bad parameters for process job call.</source> <translation>Błędne parametry wywołania zadania.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="282"/> <source>External command failed to finish.</source> <translation>Nie udało się ukończyć zewnętrznego polecenia.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="283"/> <source>Command <i>%1</i> failed to finish in %2 seconds.</source> <translation>Nie udało się ukończyć polecenia <i>%1</i> w ciągu %2 sekund.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="289"/> <source>External command finished with errors.</source> <translation>Ukończono zewnętrzne polecenie z błędami.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="290"/> <source>Command <i>%1</i> finished with exit code %2.</source> <translation>Polecenie <i>%1</i> zostało ukończone z błędem o kodzie %2.</translation> </message> </context> <context> <name>QObject</name> <message> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="82"/> <source>Default Keyboard Model</source> <translation>Domyślny model klawiatury</translation> </message> <message> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="127"/> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="163"/> <source>Default</source> <translation>Domyślnie</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="204"/> <source>unknown</source> <translation>nieznany</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="206"/> <source>extended</source> <translation>rozszerzona</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="208"/> <source>unformatted</source> <translation>niesformatowany</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="210"/> <source>swap</source> <translation>przestrzeń wymiany</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="49"/> <source>Unpartitioned space or unknown partition table</source> <translation>Przestrzeń bez partycji lub nieznana tabela partycji</translation> </message> </context> <context> <name>ReplaceWidget</name> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="134"/> <source>Select where to install %1.<br/><font color="red">Warning: </font>this will delete all files on the selected partition.</source> <translation>Wskaż gdzie zainstalować %1.<br/><font color="red">Uwaga: </font>na wybranej partycji zostaną usunięte wszystkie pliki.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="160"/> <source>The selected item does not appear to be a valid partition.</source> <translation>Wybrany element zdaje się nie być poprawną partycją.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="168"/> <source>%1 cannot be installed on empty space. Please select an existing partition.</source> <translation>Nie można zainstalować %1 na pustej przestrzeni. Prosimy wybrać istniejącą partycję.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="178"/> <source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source> <translation>Nie można zainstalować %1 na rozszerzonej partycji. Prosimy wybrać istniejącą partycję podstawową lub logiczną.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="188"/> <source>%1 cannot be installed on this partition.</source> <translation>%1 nie może zostać zainstalowany na tej partycji.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="194"/> <source>Data partition (%1)</source> <translation>Partycja z danymi (%1)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="211"/> <source>Unknown system partition (%1)</source> <translation>Nieznana partycja systemowa (%1)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="216"/> <source>%1 system partition (%2)</source> <translation>%1 partycja systemowa (%2)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="227"/> <source><strong>%4</strong><br/><br/>The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source> <translation><strong>%4</strong><br/><br/>Partycja %1 jest zbyt mała dla %2. Prosimy wybrać partycję o pojemności przynajmniej %3 GB.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="250"/> <source><strong>%2</strong><br/><br/>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source> <translation><strong>%2</strong><br/><br/>Nigdzie w tym systemie nie można odnaleźć partycji systemowej EFI. Prosimy się cofnąć i użyć ręcznego partycjonowania dysku do ustawienia %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="261"/> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="278"/> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="302"/> <source><strong>%3</strong><br/><br/>%1 will be installed on %2.<br/><font color="red">Warning: </font>all data on partition %2 will be lost.</source> <translation><strong>%3</strong><br/><br/>%1 zostanie zainstalowany na %2.<br/><font color="red">Uwaga: </font>wszystkie dane znajdujące się na partycji %2 zostaną utracone.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="270"/> <source>The EFI system partition at %1 will be used for starting %2.</source> <translation>Partycja systemowa EFI na %1 będzie użyta do uruchamiania %2.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="286"/> <source>EFI system partition:</source> <translation>Partycja systemowa EFI:</translation> </message> </context> <context> <name>RequirementsChecker</name> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="68"/> <source>Gathering system information...</source> <translation>Zbieranie informacji o systemie...</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="116"/> <source>has at least %1 GB available drive space</source> <translation>ma przynajmniej %1 GB dostępnego miejsca na dysku</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="118"/> <source>There is not enough drive space. At least %1 GB is required.</source> <translation>Nie ma wystarczającej ilości miejsca na dysku. Wymagane jest przynajmniej %1 GB.</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="126"/> <source>has at least %1 GB working memory</source> <translation>ma przynajmniej %1 GB pamięci roboczej</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="128"/> <source>The system does not have enough working memory. At least %1 GB is required.</source> <translation>System nie posiada wystarczającej ilości pamięci roboczej. Wymagane jest przynajmniej %1 GB.</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="136"/> <source>is plugged in to a power source</source> <translation>jest podłączony do źródła zasilania</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="137"/> <source>The system is not plugged in to a power source.</source> <translation>System nie jest podłączony do źródła zasilania.</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="144"/> <source>is connected to the Internet</source> <translation>jest podłączony do Internetu</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="145"/> <source>The system is not connected to the Internet.</source> <translation>System nie jest podłączony do Internetu.</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="153"/> <source>The installer is not running with administrator rights.</source> <translation>Instalator jest uruchomiony bez praw administratora.</translation> </message> <message> <location filename="../src/modules/welcome/checker/RequirementsChecker.cpp" line="161"/> <source>The screen is too small to display the installer.</source> <translation>Zbyt niska rozdzielczość ekranu, aby wyświetlić instalator.</translation> </message> </context> <context> <name>ResizePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="48"/> <source>Resize partition %1.</source> <translation>Zmień rozmiar partycji %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="55"/> <source>Resize <strong>%2MB</strong> partition <strong>%1</strong> to <strong>%3MB</strong>.</source> <translation>Zmień rozmiar partycji <strong>%2MB</strong> <strong>%1</strong> do <strong>%3MB</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="66"/> <source>Resizing %2MB partition %1 to %3MB.</source> <translation>Zmiana rozmiaru partycji %1 z %2MB do %3MB.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="85"/> <source>The installer failed to resize partition %1 on disk '%2'.</source> <translation>Instalator nie mógł zmienić rozmiaru partycji %1 na dysku '%2'.</translation> </message> </context> <context> <name>ScanningDialog</name> <message> <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/> <source>Scanning storage devices...</source> <translation>Skanowanie urządzeń przechowywania...</translation> </message> <message> <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/> <source>Partitioning</source> <translation>Partycjonowanie</translation> </message> </context> <context> <name>SetHostNameJob</name> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="37"/> <source>Set hostname %1</source> <translation>Ustaw nazwę komputera %1</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="44"/> <source>Set hostname <strong>%1</strong>.</source> <translation>Ustaw nazwę komputera <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="51"/> <source>Setting hostname %1.</source> <translation>Ustawianie nazwy komputera %1.</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="61"/> <location filename="../src/modules/users/SetHostNameJob.cpp" line="68"/> <source>Internal Error</source> <translation>Błąd wewnętrzny</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="75"/> <location filename="../src/modules/users/SetHostNameJob.cpp" line="86"/> <source>Cannot write hostname to target system</source> <translation>Nie można zapisać nazwy komputera w docelowym systemie</translation> </message> </context> <context> <name>SetKeyboardLayoutJob</name> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/> <source>Set keyboard model to %1, layout to %2-%3</source> <translation>Ustaw model klawiatury na %1, jej układ na %2-%3</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="318"/> <source>Failed to write keyboard configuration for the virtual console.</source> <translation>Błąd zapisu konfiguracji klawiatury dla konsoli wirtualnej.</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="319"/> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="323"/> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="329"/> <source>Failed to write to %1</source> <translation>Nie można zapisać do %1</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="322"/> <source>Failed to write keyboard configuration for X11.</source> <translation>Błąd zapisu konfiguracji klawiatury dla X11.</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="328"/> <source>Failed to write keyboard configuration to existing /etc/default directory.</source> <translation>Błąd zapisu konfiguracji układu klawiatury dla istniejącego katalogu /etc/default.</translation> </message> </context> <context> <name>SetPartFlagsJob</name> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="49"/> <source>Set flags on partition %1.</source> <translation>Ustaw flagi na partycji %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="52"/> <source>Set flags on %1MB %2 partition.</source> <translation>Ustaw flagi na partycji %1MB %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="56"/> <source>Set flags on new partition.</source> <translation>Ustaw flagi na nowej partycji.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="67"/> <source>Clear flags on partition <strong>%1</strong>.</source> <translation>Usuń flagi na partycji <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="71"/> <source>Clear flags on %1MB <strong>%2</strong> partition.</source> <translation>Wyczyść flagi z partycji %1MB <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="75"/> <source>Clear flags on new partition.</source> <translation>Wyczyść flagi na nowej partycji.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="79"/> <source>Flag partition <strong>%1</strong> as <strong>%2</strong>.</source> <translation>Oflaguj partycję <strong>%1</strong> jako <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="85"/> <source>Flag %1MB <strong>%2</strong> partition as <strong>%3</strong>.</source> <translation>Oflaguj partycję %1MB <strong>%2</strong> jako <strong>%3</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="91"/> <source>Flag new partition as <strong>%1</strong>.</source> <translation>Oflaguj nową partycję jako <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="103"/> <source>Clearing flags on partition <strong>%1</strong>.</source> <translation>Usuwanie flag na partycji <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="107"/> <source>Clearing flags on %1MB <strong>%2</strong> partition.</source> <translation>Czyszczenie flag partycji %1MB <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="111"/> <source>Clearing flags on new partition.</source> <translation>Czyszczenie flag na nowej partycji.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="115"/> <source>Setting flags <strong>%2</strong> on partition <strong>%1</strong>.</source> <translation>Ustawianie flag <strong>%2</strong> na partycji <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="121"/> <source>Setting flags <strong>%3</strong> on %1MB <strong>%2</strong> partition.</source> <translation>Ustawienie flag <strong>%3</strong> na partycji %1MB <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="127"/> <source>Setting flags <strong>%1</strong> on new partition.</source> <translation>Ustawianie flag <strong>%1</strong> na nowej partycji.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="140"/> <source>The installer failed to set flags on partition %1.</source> <translation>Instalator nie mógł ustawić flag na partycji %1.</translation> </message> </context> <context> <name>SetPasswordJob</name> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/> <source>Set password for user %1</source> <translation>Ustaw hasło dla użytkownika %1</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/> <source>Setting password for user %1.</source> <translation>Ustawianie hasła użytkownika %1.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/> <source>Bad destination system path.</source> <translation>Błędna ścieżka docelowa systemu.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/> <source>rootMountPoint is %1</source> <translation>Punkt montowania / to %1</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/> <source>Cannot disable root account.</source> <translation>Nie można wyłączyć konta administratora.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/> <source>passwd terminated with error code %1.</source> <translation>Zakończono passwd z kodem błędu %1.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/> <source>Cannot set password for user %1.</source> <translation>Nie można ustawić hasła dla użytkownika %1.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/> <source>usermod terminated with error code %1.</source> <translation>Polecenie usermod przerwane z kodem błędu %1.</translation> </message> </context> <context> <name>SetTimezoneJob</name> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/> <source>Set timezone to %1/%2</source> <translation>Ustaw strefę czasowa na %1/%2</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/> <source>Cannot access selected timezone path.</source> <translation>Brak dostępu do wybranej ścieżki strefy czasowej.</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/> <source>Bad path: %1</source> <translation>Niepoprawna ścieżka: %1</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/> <source>Cannot set timezone.</source> <translation>Nie można ustawić strefy czasowej.</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/> <source>Link creation failed, target: %1; link name: %2</source> <translation>Błąd tworzenia dowiązania, cel: %1; nazwa dowiązania: %2</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/> <source>Cannot set timezone,</source> <translation>Nie można ustawić strefy czasowej,</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/> <source>Cannot open /etc/timezone for writing</source> <translation>Nie można otworzyć /etc/timezone celem zapisu</translation> </message> </context> <context> <name>ShellProcessJob</name> <message> <location filename="../src/modules/shellprocess/ShellProcessJob.cpp" line="51"/> <source>Shell Processes Job</source> <translation type="unfinished"/> </message> </context> <context> <name>SummaryPage</name> <message> <location filename="../src/modules/summary/SummaryPage.cpp" line="49"/> <source>This is an overview of what will happen once you start the install procedure.</source> <translation>To jest podsumowanie czynności, które zostaną wykonane po rozpoczęciu przez Ciebie instalacji.</translation> </message> </context> <context> <name>SummaryViewStep</name> <message> <location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/> <source>Summary</source> <translation>Podsumowanie</translation> </message> </context> <context> <name>TrackingInstallJob</name> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="43"/> <source>Installation feedback</source> <translation>Informacja zwrotna o instalacji</translation> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="53"/> <source>Sending installation feedback.</source> <translation>Wysyłanie informacji zwrotnej o instalacji.</translation> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="88"/> <source>Internal error in install-tracking.</source> <translation>Błąd wewnętrzny śledzenia instalacji.</translation> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="89"/> <source>HTTP request timed out.</source> <translation>Wyczerpano limit czasu żądania HTTP.</translation> </message> </context> <context> <name>TrackingMachineNeonJob</name> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="104"/> <source>Machine feedback</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="114"/> <source>Configuring machine feedback.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="133"/> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="136"/> <source>Error in machine feedback configuration.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="134"/> <source>Could not configure machine feedback correctly, script error %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="137"/> <source>Could not configure machine feedback correctly, Calamares error %1.</source> <translation type="unfinished"/> </message> </context> <context> <name>TrackingPage</name> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="24"/> <source>Placeholder</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="72"/> <source><html><head/><body><p>By selecting this, you will send <span style=" font-weight:600;">no information at all</span> about your installation.</p></body></html></source> <translation><html><head/><body><p>Jeżeli wybierzesz tą opcję, nie zostaną wysłane <span style=" font-weight:600;">żadne informacje</span> o Twojej instalacji.</p></body></html></translation> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="123"/> <location filename="../src/modules/tracking/page_trackingstep.ui" line="185"/> <location filename="../src/modules/tracking/page_trackingstep.ui" line="247"/> <source>TextLabel</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="133"/> <location filename="../src/modules/tracking/page_trackingstep.ui" line="195"/> <location filename="../src/modules/tracking/page_trackingstep.ui" line="257"/> <source>...</source> <translation>…</translation> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="271"/> <source><html><head/><body><p><a href="placeholder"><span style=" text-decoration: underline; color:#2980b9;">Click here for more information about user feedback</span></a></p></body></html></source> <translation><html><head/><body><p><a href="placeholder"><span style=" text-decoration: underline; color:#2980b9;">Naciśnij, aby dowiedzieć się więcej o uzyskiwaniu informacji zwrotnych.</span></a></p></body></html></translation> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="44"/> <source>Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.</source> <translation>Śledzenie instalacji pomoże %1 dowiedzieć się, ilu mają użytkowników, na jakim sprzęcie instalują %1 i (jeżeli wybierzesz dwie ostatnie opcje) uzyskać informacje o używanych aplikacjach. Jeżeli chcesz wiedzieć, jakie informacje będą wysyłane, naciśnij ikonę pomocy obok.</translation> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="45"/> <source>By selecting this you will send information about your installation and hardware. This information will <b>only be sent once</b> after the installation finishes.</source> <translation>Jeżeli wybierzesz tę opcję, zostaną wysłane informacje dotyczące tej instalacji i używanego sprzętu. Zostaną wysłane <b>jednokrotnie</b> po zakończeniu instalacji.</translation> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="46"/> <source>By selecting this you will <b>periodically</b> send information about your installation, hardware and applications, to %1.</source> <translation>Jeżeli wybierzesz tę opcję, <b>okazjonalnie</b> będą wysyłane informacje dotyczące tej instalacji, używanego sprzętu i aplikacji do %1.</translation> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="47"/> <source>By selecting this you will <b>regularly</b> send information about your installation, hardware, applications and usage patterns, to %1.</source> <translation>Jeżeli wybierzesz tą opcję, <b>regularnie</b> będą wysyłane informacje dotyczące tej instalacji, używanego sprzętu i aplikacji do %1.</translation> </message> </context> <context> <name>TrackingViewStep</name> <message> <location filename="../src/modules/tracking/TrackingViewStep.cpp" line="59"/> <source>Feedback</source> <translation>Informacje zwrotne</translation> </message> </context> <context> <name>UsersPage</name> <message> <location filename="../src/modules/users/UsersPage.cpp" line="289"/> <source>Your username is too long.</source> <translation>Twoja nazwa użytkownika jest za długa.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="295"/> <source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source> <translation>Twoja nazwa użytkownika zawiera niepoprawne znaki. Dozwolone są tylko małe litery i cyfry.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="333"/> <source>Your hostname is too short.</source> <translation>Twoja nazwa komputera jest za krótka.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="339"/> <source>Your hostname is too long.</source> <translation>Twoja nazwa komputera jest za długa.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="345"/> <source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source> <translation>Twoja nazwa komputera zawiera niepoprawne znaki. Dozwolone są tylko litery, cyfry i myślniki.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="373"/> <location filename="../src/modules/users/UsersPage.cpp" line="417"/> <source>Your passwords do not match!</source> <translation>Twoje hasła nie są zgodne!</translation> </message> </context> <context> <name>UsersViewStep</name> <message> <location filename="../src/modules/users/UsersViewStep.cpp" line="51"/> <source>Users</source> <translation>Użytkownicy</translation> </message> </context> <context> <name>WelcomePage</name> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="14"/> <source>Form</source> <translation>Formularz</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="75"/> <source>&Language:</source> <translation>&Język:</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="176"/> <source>&Release notes</source> <translation>Informacje o &wydaniu</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="166"/> <source>&Known issues</source> <translation>&Znane problemy</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="156"/> <source>&Support</source> <translation>&Wsparcie</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="146"/> <source>&About</source> <translation>&Informacje</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/> <source><h1>Welcome to the %1 installer.</h1></source> <translation><h1>Witamy w instalatorze %1.</h1></translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="60"/> <source><h1>Welcome to the Calamares installer for %1.</h1></source> <translation><h1>Witamy w instalatorze Calamares dla systemu %1.</h1></translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="73"/> <source>About %1 installer</source> <translation>O instalatorze %1</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/> <source><h1>%1</h1><br/><strong>%2<br/>for %3</strong><br/><br/>Copyright 2014-2017 Teo Mrnjavac &lt;teo@kde.org&gt;<br/>Copyright 2017 Adriaan de Groot &lt;groot@kde.org&gt;<br/>Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.</source> <translation><h1>%1</h1><br/><strong>%2<br/>dla %3</strong><br/><br/>Prawa autorskie 2014-2017 Teo Mrnjavac &lt;teo@kde.org&gt;<br/>Prawa autorskie 2017 Adriaan de Groot &lt;groot@kde.org&gt;<br/>Podziękowania dla: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg i <a href="https://www.transifex.com/calamares/calamares/">zespołu tłumaczy Calamares</a>.<br/><br/><a href="https://calamares.io/">Projekt Calamares</a> jest sponsorowany przez <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="201"/> <source>%1 support</source> <translation>Wsparcie %1</translation> </message> </context> <context> <name>WelcomeViewStep</name> <message> <location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="51"/> <source>Welcome</source> <translation>Witamy</translation> </message> </context> </TS>