AboutData <h1>%1</h1> %2 for %3 <h1>%1</h1> %2 for %3 Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://app.transifex.com/calamares/calamares/">Calamares translators team</a>. Copyright %1-%2 %3 <%4> Copyright year-year Name <email-address> காப்புரிமை %1-%2 %3 <%4> ActiveDirectoryJob Enroll system in Active Directory @label Enrolling system in Active Directory… @status AutoMountManagementJob Managing auto-mount settings… @status BootInfoWidget The boot environment of this system. Older x86 systems only support BIOS. Modern systems usually use EFI, but may also show up as BIOS if started in compatibility mode. This system was started with an EFI boot environment. To configure startup from an EFI environment, this installer must deploy a boot loader application, like GRUB or systemd-boot on an EFI System Partition. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. This system was started with a BIOS boot environment. To configure startup from a BIOS environment, this installer must install a boot loader, like GRUB, either at the beginning of a partition or on the Master Boot Record near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. BootLoaderModel Master Boot Record of %1 @info Boot Partition @info இயக்கப் பகுதிப்பிரிப்பு System Partition @info Do not install a boot loader @label %1 (%2) Calamares::BlankViewStep Blank Page Calamares::DebugWindow GlobalStorage JobQueue Modules Type: none Interface: Crashes Calamares, so that Dr. Konqi can look at it. Reloads the stylesheet from the branding directory. Reload Stylesheet Displays the tree of widget names in the log (for stylesheet debugging). Widget Tree Uploads the session log to the configured pastebin. Send Session Log Debug Information @title Calamares::ExecutionViewStep %p% Progress percentage indicator: %p is where the number 0..100 is placed Set Up @label Install @label Calamares::FailJob Job failed (%1) Programmed job failure was explicitly requested. Calamares::JobThread Done Calamares::NamedJob Example job (%1) Calamares::ProcessJob Running command %1 in target system… @status Running command %1… @status Calamares::Python::Job Running %1 operation. Bad working directory path Working directory %1 for python job %2 is not readable. Bad main script file Main script file %1 for python job %2 is not readable. Bad internal script Internal script for python job %1 raised an exception. Main script file %1 for python job %2 could not be loaded because it raised an exception. Main script file %1 for python job %2 raised an exception. Main script file %1 for python job %2 returned invalid results. Main script file %1 for python job %2 does not contain a run() function. Calamares::PythonJob Running %1 operation… @status Bad working directory path @error Working directory %1 for python job %2 is not readable. @error Bad main script file @error Main script file %1 for python job %2 is not readable. @error Boost.Python error in job "%1" @error Calamares::QmlViewStep Loading… @status QML step %1. @label Loading failed. @info Calamares::RequirementsChecker Requirements checking for module '%1' is complete. @info Waiting for %n module(s)… @status (%n second(s)) @status System-requirements checking is complete. @info Calamares::ViewManager The upload was unsuccessful. No web-paste was done. Install log posted to %1 Link copied to clipboard Install Log Paste URL &Yes &No &Close Setup Failed @title Installation Failed @title Error @title Calamares Initialization Failed @title %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution. @info The following modules could not be loaded: @info Continue with Setup? @title Continue with Installation? @title The %1 setup program is about to make changes to your disk in order to set up %2. You will not be able to undo these changes. %1 is short product name, %2 is short product name with version The %1 installer is about to make changes to your disk in order to install %2. You will not be able to undo these changes. %1 is short product name, %2 is short product name with version &Set Up Now @button &Install Now @button Go &Back @button &Set Up @button &Install @button Setup is complete. Close the setup program. @tooltip The installation is complete. Close the installer. @tooltip Cancel the setup process without changing the system. @tooltip Cancel the installation process without changing the system. @tooltip &Next @button &Back @button &Done @button &Cancel @button Cancel Setup? @title Cancel Installation? @title Do you really want to cancel the current setup process? The setup program will quit and all changes will be lost. Do you really want to cancel the current install process? The installer will quit and all changes will be lost. CalamaresPython::Helper Unknown exception type @error Unparseable Python error @error Unparseable Python traceback @error Unfetchable Python error @error CalamaresWindow %1 Setup Program %1 Installer ChangeFilesystemLabelJob Set filesystem label on %1 @title Set filesystem label %1 to partition %2 @info Setting filesystem label %1 to partition %2… @status The installer failed to update partition table on disk '%1'. @info CheckerContainer Gathering system information... ChoicePage Select storage de&vice: @label Current: @label After: @label Reuse %1 as home partition for %2 @label Select a partition to shrink, then drag the bottom bar to resize %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4. @info, %1 is partition name, %4 is product name Select a partition to install on @label An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. @info, %1 is product name The EFI system partition at %1 will be used for starting %2. @info, %1 is partition path, %2 is product name EFI system partition: @label This storage device does not seem to have an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. Erase disk This will delete all data currently present on the selected storage device. Install alongside The installer will shrink a partition to make room for %1. Replace a partition Replaces a partition with %1. This storage device has %1 on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. This storage device already has an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. This storage device has multiple operating systems on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. This storage device already has an operating system on it, but the partition table %1 is different from the needed %2. This storage device has one of its partitions mounted. @info This storage device is a part of an inactive RAID device. @info No swap @label Reuse swap @label Swap (no Hibernate) @label Swap (with Hibernate) @label Swap to file @label Manual partitioning You can create or resize partitions yourself. Bootloader location: @label ClearMountsJob Successfully unmounted %1. Successfully disabled swap %1. Successfully cleared swap %1. Successfully closed mapper device %1. Successfully disabled volume group %1. Clear mounts for partitioning operations on %1 @title Clearing mounts for partitioning operations on %1… @status Cleared all mounts for %1 ClearTempMountsJob Clearing all temporary mounts… @status Cleared all temporary mounts. CommandList Could not run command. The commands use variables that are not defined. Missing variables are: %1. Config Setup Failed @title Installation Failed @title The setup of %1 did not complete successfully. @info The installation of %1 did not complete successfully. @info Setup Complete @title Installation Complete @title The setup of %1 is complete. @info The installation of %1 is complete. @info Keyboard model has been set to %1 . @label, %1 is keyboard model, as in Apple Magic Keyboard Keyboard layout has been set to %1/%2. @label, %1 is layout, %2 is layout variant Set timezone to %1/%2 @action The system language will be set to %1. @info The numbers and dates locale will be set to %1. @info Network Installation. (Disabled: Incorrect configuration) Network Installation. (Disabled: Received invalid groups data) Network Installation. (Disabled: Internal error) Network Installation. (Disabled: Unable to fetch package lists, check your network connection) Network Installation. (Disabled: No package list) Package selection Package Selection Please pick a product from the list. The selected product will be installed. Packages Install option: %1 None Summary @label This is an overview of what will happen once you start the setup procedure. This is an overview of what will happen once you start the install procedure. Your username is too long. Your username must start with a lowercase letter or underscore. Only lowercase letters, numbers, underscore and hyphen are allowed. '%1' is not allowed as username. Your hostname is too short. Your hostname is too long. '%1' is not allowed as hostname. Only letters, numbers, underscore and hyphen are allowed. Your passwords do not match! OK! This computer does not satisfy the minimum requirements for setting up %1. Setup cannot continue. This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. This computer does not satisfy some of the recommended requirements for installing %1. Installation can continue, but some features might be disabled. This program will ask you some questions and set up %2 on your computer. <h1>Welcome to the Calamares setup program for %1</h1> <h1>Welcome to %1 setup</h1> <h1>Welcome to the Calamares installer for %1</h1> <h1>Welcome to the %1 installer</h1> ContextualProcessJob Performing contextual processes' job… @status CreatePartitionDialog Create a Partition Si&ze: MiB Partition &Type: Primar&y E&xtended Fi&le System: LVM LV name &Mount Point: Flags: Label for the filesystem கோப்பு முறைமைக்கான லேபல் FS Label: En&crypt @action Logical @label Primary @label GPT @label Mountpoint already in use. Please select another one. @info Mountpoint must start with a <tt>/</tt>. @info CreatePartitionJob Create new %1MiB partition on %3 (%2) with entries %4 @title Create new %1MiB partition on %3 (%2) @title Create new %2MiB partition on %4 (%3) with file system %1 @title Create new %1MiB partition on %3 (%2) with entries %4 @info Create new %1MiB partition on %3 (%2) @info Create new %2MiB partition on %4 (%3) with file system %1 @info Creating new %1 partition on %2… @status The installer failed to create partition on disk '%1'. @info CreatePartitionTableDialog Create Partition Table Creating a new partition table will delete all existing data on the disk. What kind of partition table do you want to create? Master Boot Record (MBR) GUID Partition Table (GPT) CreatePartitionTableJob Creating new %1 partition table on %2… @status Creating new %1 partition table on %2 (%3)… @status The installer failed to create a partition table on %1. CreateUserJob Create user %1 Create user %1 Creating user %1… @status Preserving home directory… @status Configuring user %1 @status Setting file permissions… @status CreateVolumeGroupDialog Create Volume Group @title CreateVolumeGroupJob Creating new volume group named %1… @status Creating new volume group named %1… @status The installer failed to create a volume group named '%1'. DeactivateVolumeGroupJob Deactivating volume group named %1… @status Deactivating volume group named %1… @status The installer failed to deactivate a volume group named %1. DeletePartitionJob Deleting partition %1… @status Deleting partition %1… @status The installer failed to delete partition %1. DeviceInfoWidget This partition table type is only advisable on older systems which start from a BIOS boot environment. GPT is recommended in most other cases. Warning: the MBR partition table is an obsolete MS-DOS era standard. Only 4 primary partitions may be created, and of those 4, one can be an extended partition, which may in turn contain many logical partitions. This is the recommended partition table type for modern systems which start from an EFI boot environment. This is a loop device. It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. This installer cannot detect a partition table on the selected storage device. The device either has no partition table, or the partition table is corrupted or of an unknown type. This installer can create a new partition table for you, either automatically, or through the manual partitioning page. This device has a %1 partition table. The type of partition table on the selected storage device. The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device. This installer will keep the current partition table unless you explicitly choose otherwise. If unsure, on modern systems GPT is preferred. DeviceModel %1 - %2 (%3) device[name] - size[number] (device-node[name]) %1 - (%2) device[name] - (device-node[name]) DracutLuksCfgJob Writing LUKS configuration for Dracut to %1… @status Skipping writing LUKS configuration for Dracut: "/" partition is not encrypted @info Failed to open %1 @error DummyCppJob Performing dummy C++ job… @status EditExistingPartitionDialog Edit Existing Partition Con&tent: &Keep Format Warning: Formatting the partition will erase all existing data. &Mount Point: Si&ze: MiB Fi&le System: Flags: Label for the filesystem கோப்பு முறைமைக்கான லேபல் FS Label: Passphrase for existing partition Partition %1 could not be decrypted with the given passphrase. Edit the partition again and give the correct passphrase or delete and create a new encrypted partition. EncryptWidget En&crypt system Your system does not seem to support encryption well enough to encrypt the entire system. You may enable encryption, but performance may suffer. Passphrase Confirm passphrase Please enter the same passphrase in both boxes. @tooltip Password must be a minimum of %1 characters. @tooltip ErrorDialog Details: Would you like to paste the install log to the web? FillGlobalStorageJob Set partition information @title Install %1 on new %2 system partition with features %3 @info Install %1 on new %2 system partition @info Set up new %2 partition with mount point %1 and features %3 @info Set up new %2 partition with mount point %1%3 @info Install %2 on %3 system partition %1 with features %4 @info Install %2 on %3 system partition %1 @info Set up %3 partition %1 with mount point %2 and features %4 @info Set up %3 partition %1 with mount point %2%4… @info Install boot loader on %1… @info Setting up mount points… @status FinishedPage &Restart now <h1>All done.</h1> %1 has been set up on your computer. You may now start using your new system. @info <html><head/><body>When this box is checked, your system will restart immediately when you click on Done or close the setup program.</body></html> @tooltip <h1>All done.</h1> %1 has been installed on your computer. You may now restart into your new system, or continue using the %2 Live environment. @info <html><head/><body>When this box is checked, your system will restart immediately when you click on Done or close the installer.</body></html> @tooltip <h1>Setup Failed</h1> %1 has not been set up on your computer. The error message was: %2. @info, %1 is product name with version <h1>Installation Failed</h1> %1 has not been installed on your computer. The error message was: %2. @info, %1 is product name with version FinishedQmlViewStep Finish @label FinishedViewStep Finish @label FormatPartitionJob Format partition %1 (file system: %2, size: %3 MiB) on %4 @title Format %3MiB partition %1 with file system %2 @info %1 (%2) partition label %1 (device path %2) Formatting partition %1 with file system %2… @status The installer failed to format partition %1 on disk '%2'. GeneralRequirements Please ensure the system has at least %1 GiB available drive space. Available drive space is all of the hard disks and SSDs connected to the system. There is not enough drive space. At least %1 GiB is required. has at least %1 GiB working memory The system does not have enough working memory. At least %1 GiB is required. is plugged in to a power source The system is not plugged in to a power source. is connected to the Internet The system is not connected to the Internet. is running the installer as an administrator (root) The setup program is not running with administrator rights. The installer is not running with administrator rights. has a screen large enough to show the whole installer The screen is too small to display the setup program. The screen is too small to display the installer. is always false The computer says no. is always false (slowly) The computer says no (slowly). is always true The computer says yes. is always true (slowly) The computer says yes (slowly). is checked three times. The snark has not been checked three times. The (some mythological beast) has not been checked three times. HostInfoJob Collecting information about your machine… @status IDJob OEM Batch Identifier Could not create directories <code>%1</code>. Could not open file <code>%1</code>. Could not write to file <code>%1</code>. InitcpioJob Creating initramfs with mkinitcpio… @status InitramfsJob Creating initramfs… @status InteractiveTerminalPage Konsole not installed. @error Please install KDE Konsole and try again! @info Executing script:  <code>%1</code> @info InteractiveTerminalViewStep Script @label KeyboardQmlViewStep Keyboard @label KeyboardViewStep Keyboard @label LCLocaleDialog System Locale Setting @title The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info &Cancel @button &OK @button LOSHJob Configuring encrypted swap. No target system available. No rootMountPoint is set. No configFilePath is set. LicensePage <h1>License Agreement</h1> I accept the terms and conditions above. @info Please review the End User License Agreements (EULAs). @info This setup procedure will install proprietary software that is subject to licensing terms. @info If you do not agree with the terms, the setup procedure cannot continue. @info This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. @info If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. @info LicenseViewStep License @label LicenseWidget URL: %1 @label %1 driver by %2 @label, %1 is product name, %2 is product vendor %1 is an untranslatable product name, example: Creative Audigy driver %1 graphics driver by %2 @label, %1 is product name, %2 is product vendor %1 is usually a vendor name, example: Nvidia graphics driver %1 browser plugin by %2 @label, %1 is product name, %2 is product vendor %1 codec by %2 @label, %1 is product name, %2 is product vendor %1 package by %2 @label, %1 is product name, %2 is product vendor %1 by %2 @label, %1 is product name, %2 is product vendor File: %1 @label Hide the license text @tooltip Show the license text @tooltip Open the license agreement in browser @tooltip LocalePage Region: @label Zone: @label &Change… @button LocaleQmlViewStep Location @label LocaleTests Quit LocaleViewStep Location @label LuksBootKeyFileJob Configuring LUKS key file. No partitions are defined. Encrypted rootfs setup error Root partition %1 is LUKS but no passphrase has been set. Could not create LUKS key file for root partition %1. MachineIdJob Generate machine-id. Configuration Error No root mount point is set for MachineId. File not found Path <pre>%1</pre> must be an absolute path. Could not create new random file <pre>%1</pre>. Map Timezone: %1 @label Please select your preferred location on the map so the installer can suggest the locale and timezone settings for you. You can fine-tune the suggested settings below. Search the map by dragging to move and using the +/- buttons to zoom in/out or use mouse scrolling for zooming. @info Map-qt6 Timezone: %1 @label Please select your preferred location on the map so the installer can suggest the locale and timezone settings for you. You can fine-tune the suggested settings below. Search the map by dragging to move and using the +/- buttons to zoom in/out or use mouse scrolling for zooming. @label NetInstallViewStep Package selection Office software Office package Browser software Browser package Web browser Kernel label for netinstall module, Linux kernel Services label for netinstall module, system services Login label for netinstall module, choose login manager Desktop label for netinstall module, choose desktop environment Applications Communication label for netinstall module Development label for netinstall module Office label for netinstall module Multimedia label for netinstall module Internet label for netinstall module Theming label for netinstall module Gaming label for netinstall module Utilities label for netinstall module NotesQmlViewStep Notes OEMPage Ba&tch: <html><head/><body>Enter a batch-identifier here. This will be stored in the target system.</body></html> <html><head/><body><h1>OEM Configuration</h1>Calamares will use OEM settings while configuring the target system.</body></html> OEMViewStep OEM Configuration Set the OEM Batch Identifier to <code>%1</code>. Offline Select your preferred region, or use the default settings @label Timezone: %1 @label Select your preferred zone within your region @label Zones @button You can fine-tune language and locale settings below @label Offline-qt6 Select your preferred region, or use the default settings @label Timezone: %1 @label Select your preferred zone within your region @label Zones @button You can fine-tune language and locale settings below @label PWQ Password is too short Password is too long Password is too weak Memory allocation error when setting '%1' Memory allocation error The password is the same as the old one The password is a palindrome The password differs with case changes only The password is too similar to the old one The password contains the user name in some form The password contains words from the real name of the user in some form The password contains forbidden words in some form The password contains fewer than %n digits The password contains too few digits The password contains fewer than %n uppercase letters The password contains too few uppercase letters The password contains fewer than %n lowercase letters The password contains too few lowercase letters The password contains fewer than %n non-alphanumeric characters The password contains too few non-alphanumeric characters The password is shorter than %n characters The password is too short The password is a rotated version of the previous one The password contains fewer than %n character classes The password does not contain enough character classes The password contains more than %n same characters consecutively The password contains too many same characters consecutively The password contains more than %n characters of the same class consecutively The password contains too many characters of the same class consecutively The password contains monotonic sequence longer than %n characters The password contains too long of a monotonic character sequence No password supplied Cannot obtain random numbers from the RNG device Password generation failed - required entropy too low for settings The password fails the dictionary check - %1 The password fails the dictionary check Unknown setting - %1 Unknown setting Bad integer value of setting - %1 Bad integer value Setting %1 is not of integer type Setting is not of integer type Setting %1 is not of string type Setting is not of string type Opening the configuration file failed The configuration file is malformed Fatal failure Unknown error PackageChooserPage Product Name TextLabel Long Product Description Package Selection Please pick a product from the list. The selected product will be installed. PackageModel Name Description Page_Keyboard Keyboard model: Type here to test your keyboard Switch Keyboard: shortcut for switching between keyboard layouts Page_UserSetup What is your name? Your Full Name What name do you want to use to log in? login What is the name of this computer? This name will be used if you make the computer visible to others on a network. Computer Name Choose a password to keep your account safe. Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. Password Repeat Password When this box is checked, password-strength checking is done and you will not be able to use a weak password. Require strong passwords. Log in automatically without asking for the password. Use the same password for the administrator account. Choose a password for the administrator account. Enter the same password twice, so that it can be checked for typing errors. Use Active Directory Domain: Domain Administrator: Password: IP Address (optional): PartitionLabelsView Root Home @label Boot @label EFI system @label Swap @label New partition for %1 @label New partition @label %1 %2 size[number] filesystem[name] PartitionModel Free Space @title New Partition @title Name @title File System @title File System Label @title Mount Point @title Size @title PartitionPage Storage de&vice: &Revert All Changes New Partition &Table Cre&ate &Edit &Delete New Volume Group Resize Volume Group Deactivate Volume Group Remove Volume Group I&nstall boot loader on: Are you sure you want to create a new partition table on %1? Can not create new partition The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead. PartitionViewStep Gathering system information… @status Partitions @label Install %1 alongside another operating system @label Erase disk and install %1 @label Replace a partition with %1 @label Manual partitioning @label Install %1 alongside another operating system on disk %2 (%3) @info Erase disk %2 (%3) and install %1 @info Replace a partition on disk %2 (%3) with %1 @info Manual partitioning on disk %1 (%2) @info Disk %1 (%2) @info Unsafe partition actions are enabled. Partitioning is configured to always fail. No partitions will be changed. Current: @label After: @label An EFI system partition is necessary to start %1. To configure an EFI system partition, go back and select or create a suitable filesystem. An EFI system partition is necessary to start %1. The EFI system partition does not meet recommendations. It is recommended to go back and select or create a suitable filesystem. The filesystem must be mounted on %1. The filesystem must have type FAT32. The filesystem must have flag %1 set. The filesystem must be at least %1 MiB in size. The minimum recommended size for the filesystem is %1 MiB. You can continue without setting up an EFI system partition but your system may fail to start. You can continue with this EFI system partition configuration but your system may fail to start. No EFI system partition configured EFI system partition configured incorrectly EFI system partition recommendation Option to use GPT on BIOS A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too. To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the %2 flag enabled. An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT. Boot partition not encrypted A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted. There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition. You may continue if you wish, but filesystem unlocking will happen later during system startup. To encrypt the boot partition, go back and recreate it, selecting Encrypt in the partition creation window. has at least one disk device available. There are no partitions to install on. PlasmaLnfJob Applying Plasma Look-and-Feel… @status Could not select KDE Plasma Look-and-Feel package PlasmaLnfPage Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is set up. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel. Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel. PlasmaLnfViewStep Look-and-Feel @label PowerManagementInterface Calamares Installation in progress @status PreserveFiles Saving files for later… @status No files configured to save for later. Not all of the configured files could be preserved. ProcessResult There was no output from the command. Output: External command crashed. Command %1 crashed. External command failed to start. Command %1 failed to start. Internal error when starting command. Bad parameters for process job call. External command failed to finish. Command %1 failed to finish in %2 seconds. External command finished with errors. Command %1 finished with exit code %2. QObject %1 (%2) unknown @partition info extended @partition info unformatted @partition info swap @partition info Default Directory not found Could not create new random file <pre>%1</pre>. No product No description provided. (no mount point) Unpartitioned space or unknown partition table @info Recommended This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. RemoveUserJob Removing live user from the target system… @status RemoveVolumeGroupJob Removing Volume Group named %1… @status Removing Volume Group named %1… @status The installer failed to remove a volume group named '%1'. Requirements This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. ResizeFSJob Performing file system resize… @status Invalid configuration @error The file-system resize job has an invalid configuration and will not run. @error KPMCore not available @error Calamares cannot start KPMCore for the file system resize job. @error Resize failed. @error The filesystem %1 could not be found in this system, and cannot be resized. @info The device %1 could not be found in this system, and cannot be resized. @info Resize Failed @error The filesystem %1 cannot be resized. @error The device %1 cannot be resized. @error The file system %1 must be resized, but cannot. @info The device %1 must be resized, but cannot @info ResizePartitionJob Resize partition %1 @title Resize %2MiB partition %1 to %3MiB @info Resizing %2MiB partition %1 to %3MiB… @status The installer failed to resize partition %1 on disk '%2'. ResizeVolumeGroupDialog Resize Volume Group @title ResizeVolumeGroupJob Resize volume group named %1 from %2 to %3 @title Resize volume group named %1 from %2 to %3 @info Resizing volume group named %1 from %2 to %3… @status The installer failed to resize a volume group named '%1'. ResultsListWidget Checking requirements again in a few seconds ... ScanningDialog Scanning storage devices… @status Partitioning… @status SetHostNameJob Set hostname %1 Set hostname %1. Setting hostname %1… @status Internal Error Cannot write hostname to target system SetKeyboardLayoutJob Setting keyboard model to %1, layout as %2-%3… @status, %1 model, %2 layout, %3 variant Failed to write keyboard configuration for the virtual console. @error Failed to write to %1 @error, %1 is virtual console configuration path Failed to write keyboard configuration for X11. @error Failed to write to %1 @error, %1 is keyboard configuration path Failed to write keyboard configuration to existing /etc/default directory. @error Failed to write to %1 @error, %1 is default keyboard path SetPartFlagsJob Set flags on partition %1 @title Set flags on %1MiB %2 partition @title Set flags on new partition @title Clear flags on partition %1 @info Clear flags on %1MiB %2 partition @info Clear flags on new partition @info Set flags on partition %1 to %2 @info Set flags on %1MiB %2 partition to %3 @info Set flags on new partition to %1 @info Clearing flags on partition %1… @status Clearing flags on %1MiB %2 partition… @status Clearing flags on new partition… @status Setting flags %2 on partition %1… @status Setting flags %3 on %1MiB %2 partition… @status Setting flags %1 on new partition… @status The installer failed to set flags on partition %1. SetPasswordJob Set password for user %1 Setting password for user %1… @status Bad destination system path. rootMountPoint is %1 Cannot disable root account. usermod terminated with error code %1. Cannot set password for user %1. SetTimezoneJob Setting timezone to %1/%2… @status Cannot access selected timezone path. @error Bad path: %1 @error Cannot set timezone. @error Link creation failed, target: %1; link name: %2 @info Cannot open /etc/timezone for writing @info SetupGroupsJob Preparing groups… @status Could not create groups in target system These groups are missing in the target system: %1 SetupSudoJob Configuring <pre>sudo</pre> users… @status Cannot chmod sudoers file. Cannot create sudoers file for writing. ShellProcessJob Running shell processes… @status SlideCounter %L1 / %L2 slide counter, %1 of %2 (numeric) StandardButtons &OK &Yes &No &Cancel &Close TrackingInstallJob Installation feedback Sending installation feedback… @status Internal error in install-tracking. HTTP request timed out. TrackingKUserFeedbackJob KDE user feedback Configuring KDE user feedback… @status Error in KDE user feedback configuration. Could not configure KDE user feedback correctly, script error %1. Could not configure KDE user feedback correctly, Calamares error %1. TrackingMachineUpdateManagerJob Machine feedback Configuring machine feedback… @status Error in machine feedback configuration. Could not configure machine feedback correctly, script error %1. Could not configure machine feedback correctly, Calamares error %1. TrackingPage Placeholder <html><head/><body>Click here to send no information at all about your installation.</body></html> <html><head/><body><a href="placeholder">Click here for more information about user feedback</a></body></html> Tracking helps %1 to see how often it is installed, what hardware it is installed on and which applications are used. To see what will be sent, please click the help icon next to each area. By selecting this you will send information about your installation and hardware. This information will only be sent once after the installation finishes. By selecting this you will periodically send information about your machine installation, hardware and applications, to %1. By selecting this you will regularly send information about your user installation, hardware, applications and application usage patterns, to %1. TrackingViewStep Feedback @title UmountJob Unmounting file systems… @status No target system available. No rootMountPoint is set. UsersPage If more than one person will use this computer, you can create multiple accounts after setup. If more than one person will use this computer, you can create multiple accounts after installation. UsersQmlViewStep Users UsersViewStep Users VariantModel Key Column header for key/value Value Column header for key/value VolumeGroupBaseDialog Create Volume Group List of Physical Volumes Volume Group Name: Volume Group Type: Physical Extent Size: MiB Total Size: Used Size: Total Sectors: Quantity of LVs: WelcomePage Select application and system language Open donations website &Donate Open help and support website &Support Open issues and bug-tracking website &Known issues Open release notes website &Release notes About %1 Setup @title About %1 Installer @title %1 Support @action WelcomeQmlViewStep Welcome @title WelcomeViewStep Welcome @title ZfsJob Creating ZFS pools and datasets… @status Failed to create zpool on Configuration Error No partitions are available for ZFS. Internal data missing Failed to create zpool Failed to create dataset The output was: calamares-sidebar About Debug About @button Show information about Calamares @tooltip Debug @button Show debug information @tooltip finishedq Installation Completed %1 has been installed on your computer. You may now restart into your new system, or continue using the Live environment. Close Installer Restart System A full log of the install is available as installation.log in the home directory of the Live user. This log is copied to /var/log/installation.log of the target system. finishedq-qt6 Installation Completed @title %1 has been installed on your computer. You may now restart into your new system, or continue using the Live environment. @info, %1 is the product name Close Installer @button Restart System @button A full log of the install is available as installation.log in the home directory of the Live user. This log is copied to /var/log/installation.log of the target system. @info finishedq@mobile Installation Completed @title %1 has been installed on your computer. You may now restart your device. @info, %1 is the product name Close @button Restart @button keyboardq Select a layout to activate keyboard preview @label Keyboard model:   @label Layout @label Variant @label Type here to test your keyboard… @label keyboardq-qt6 Select a layout to activate keyboard preview @label Keyboard model:   @label Layout @label Variant @label Type here to test your keyboard… @label localeq Change @button <h3>Languages</h3> The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info <h3>Locales</h3> The system locale setting affects the numbers and dates format. The current setting is %1. @info localeq-qt6 Change @button <h3>Languages</h3> The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info <h3>Locales</h3> The system locale setting affects the numbers and dates format. The current setting is %1. @info notesqml <h3>%1</h3> These are example release notes. packagechooserq LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market. Default option. LibreOffice If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives. No Office Suite Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support. It will be just a desktop, file browser, package manager, text editor and simple web-browser. Minimal Install Please select an option for your install, or use the default: LibreOffice included. packagechooserq-qt6 LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market. Default option. LibreOffice If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives. No Office Suite Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support. It will be just a desktop, file browser, package manager, text editor and simple web-browser. Minimal Install Please select an option for your install, or use the default: LibreOffice included. release_notes ### %1 This an example QML file, showing options in Markdown with Flickable content. QML with RichText can use HTML tags, with Markdown it uses the simple Markdown syntax, Flickable content is useful for touchscreens. **This is bold text** *This is italic text* _This is underlined text_ > blockquote ~~This is strikethrough~~ Code example: ``` ls -l /home ``` **Lists:** * Intel CPU systems * AMD CPU systems The vertical scrollbar is adjustable, current width set to 10. Back usersq Pick your user name and credentials to login and perform admin tasks What is your name? Your full name What name do you want to use to log in? Login name If more than one person will use this computer, you can create multiple accounts after installation. Only lowercase letters, numbers, underscore and hyphen are allowed. root is not allowed as username. What is the name of this computer? Computer name This name will be used if you make the computer visible to others on a network. Only letters, numbers, underscore and hyphen are allowed, minimal of two characters. localhost is not allowed as hostname. Choose a password to keep your account safe. Password Repeat password Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. Reuse user password as root password Use the same password for the administrator account. Choose a root password to keep your account safe. Root password Repeat root password Enter the same password twice, so that it can be checked for typing errors. Log in automatically without asking for the password Validate passwords quality When this box is checked, password-strength checking is done and you will not be able to use a weak password. usersq-qt6 Pick your user name and credentials to login and perform admin tasks What is your name? Your full name What name do you want to use to log in? Login name If more than one person will use this computer, you can create multiple accounts after installation. Only lowercase letters, numbers, underscore and hyphen are allowed. root is not allowed as username. What is the name of this computer? Computer name This name will be used if you make the computer visible to others on a network. Only letters, numbers, underscore and hyphen are allowed, minimal of two characters. localhost is not allowed as hostname. Choose a password to keep your account safe. Password Repeat password Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. Reuse user password as root password Use the same password for the administrator account. Choose a root password to keep your account safe. Root password Repeat root password Enter the same password twice, so that it can be checked for typing errors. Log in automatically without asking for the password Validate passwords quality When this box is checked, password-strength checking is done and you will not be able to use a weak password. welcomeq <h3>Welcome to the %1 <quote>%2</quote> installer</h3> This program will ask you some questions and set up %1 on your computer. Support Known Issues Release Notes Donate welcomeq-qt6 <h3>Welcome to the %1 <quote>%2</quote> installer</h3> This program will ask you some questions and set up %1 on your computer. Support Known Issues Release Notes Donate