<?xml version="1.0" ?><!DOCTYPE TS><TS language="bg" version="2.1"> <context> <name>BootInfoWidget</name> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="71"/> <source>The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode.</source> <translation><strong>Среда за начално зареждане</strong> на тази система.<br><br>Старите x86 системи поддържат само <strong>BIOS</strong>.<br>Модерните системи обикновено използват <strong>EFI</strong>, но може също така да използват BIOS, ако са стартирани в режим на съвместимост.</translation> </message> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="81"/> <source>This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.</source> <translation>Тази система беше стартирана с <strong>EFI</strong> среда за начално зареждане.<br><br>За да се настрои стартирането от EFI, инсталаторът трябва да разположи програма за начално зареждане като <strong>GRUB</strong> или <strong>systemd-boot</strong> на <strong>EFI Системен Дял</strong>. Това се прави автоматично, освен ако не се избере ръчно поделяне, в такъв случай вие трябва да свършите тази работа.</translation> </message> <message> <location filename="../src/modules/partition/gui/BootInfoWidget.cpp" line="93"/> <source>This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.</source> <translation>Тази система беше стартирана с <strong>BIOS</strong> среда за начално зареждане.<br><br>За да се настрои стартирането от BIOS, инсталаторът трябва да разположи програма за начално зареждане като <strong>GRUB</strong> в началото на дяла или на <strong>Сектора за Начално Зареждане</strong> близо до началото на таблицата на дяловете (предпочитано). Това се прави автоматично, освен ако не се избере ръчно поделяне, в такъв случай вие трябва да свършите тази работа.</translation> </message> </context> <context> <name>BootLoaderModel</name> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="66"/> <source>Master Boot Record of %1</source> <translation>Сектор за начално зареждане на %1</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="95"/> <source>Boot Partition</source> <translation>Дял за начално зареждане</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="100"/> <source>System Partition</source> <translation>Системен дял</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="130"/> <source>Do not install a boot loader</source> <translation>Не инсталирай програма за начално зареждане</translation> </message> <message> <location filename="../src/modules/partition/core/BootLoaderModel.cpp" line="147"/> <source>%1 (%2)</source> <translation>%1 (%2)</translation> </message> </context> <context> <name>Calamares::BlankViewStep</name> <message> <location filename="../src/libcalamaresui/viewpages/BlankViewStep.cpp" line="69"/> <source>Blank Page</source> <translation>Празна страница</translation> </message> </context> <context> <name>Calamares::DebugWindow</name> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="24"/> <source>GlobalStorage</source> <translation>Глобално съхранение</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="34"/> <source>JobQueue</source> <translation>Опашка от задачи</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="44"/> <source>Modules</source> <translation>Модули</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="57"/> <source>Type:</source> <translation>Вид:</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="64"/> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="78"/> <source>none</source> <translation>няма</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="71"/> <source>Interface:</source> <translation>Интерфейс:</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.ui" line="93"/> <source>Tools</source> <translation>Инструменти</translation> </message> <message> <location filename="../src/libcalamaresui/utils/DebugWindow.cpp" line="193"/> <source>Debug information</source> <translation>Информация за отстраняване на грешки</translation> </message> </context> <context> <name>Calamares::ExecutionViewStep</name> <message> <location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="82"/> <source>Set up</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ExecutionViewStep.cpp" line="83"/> <source>Install</source> <translation>Инсталирай</translation> </message> </context> <context> <name>Calamares::FailJob</name> <message> <location filename="../src/libcalamares/JobExample.cpp" line="39"/> <source>Job failed (%1)</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/JobExample.cpp" line="39"/> <source>Programmed job failure was explicitly requested.</source> <translation type="unfinished"/> </message> </context> <context> <name>Calamares::JobThread</name> <message> <location filename="../src/libcalamares/JobQueue.cpp" line="102"/> <source>Done</source> <translation>Готово</translation> </message> </context> <context> <name>Calamares::NamedJob</name> <message> <location filename="../src/libcalamares/JobExample.cpp" line="27"/> <source>Example job (%1)</source> <translation type="unfinished"/> </message> </context> <context> <name>Calamares::ProcessJob</name> <message> <location filename="../src/libcalamares/ProcessJob.cpp" line="52"/> <source>Run command %1 %2</source> <translation>Изпълни команда %1 %2</translation> </message> <message> <location filename="../src/libcalamares/ProcessJob.cpp" line="61"/> <source>Running command %1 %2</source> <translation>Изпълняване на команда %1 %2</translation> </message> </context> <context> <name>Calamares::PythonJob</name> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="273"/> <source>Running %1 operation.</source> <translation>Изпълнение на %1 операция.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="288"/> <source>Bad working directory path</source> <translation>Невалиден път на работната директория</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="289"/> <source>Working directory %1 for python job %2 is not readable.</source> <translation>Работна директория %1 за python задача %2 не се чете.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="299"/> <source>Bad main script file</source> <translation>Невалиден файл на главен скрипт</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="300"/> <source>Main script file %1 for python job %2 is not readable.</source> <translation>Файлът на главен скрипт %1 за python задача %2 не се чете.</translation> </message> <message> <location filename="../src/libcalamares/PythonJob.cpp" line="377"/> <source>Boost.Python error in job "%1".</source> <translation>Boost.Python грешка в задача "%1".</translation> </message> </context> <context> <name>Calamares::RequirementsChecker</name> <message numerus="yes"> <location filename="../src/libcalamaresui/modulesystem/RequirementsChecker.cpp" line="147"/> <source>Waiting for %n module(s).</source> <translation type="unfinished"><numerusform></numerusform><numerusform></numerusform></translation> </message> <message numerus="yes"> <location filename="../src/libcalamaresui/modulesystem/RequirementsChecker.cpp" line="148"/> <source>(%n second(s))</source> <translation type="unfinished"><numerusform></numerusform><numerusform></numerusform></translation> </message> <message> <location filename="../src/libcalamaresui/modulesystem/RequirementsChecker.cpp" line="152"/> <source>System-requirements checking is complete.</source> <translation type="unfinished"/> </message> </context> <context> <name>Calamares::ViewManager</name> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="76"/> <source>&Back</source> <translation>&Назад</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="77"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="319"/> <source>&Next</source> <translation>&Напред</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="78"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="335"/> <source>&Cancel</source> <translation>&Отказ</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="80"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="313"/> <source>Cancel setup without changing the system.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="81"/> <location filename="../src/libcalamaresui/ViewManager.cpp" line="314"/> <source>Cancel installation without changing the system.</source> <translation>Отказ от инсталацията без промяна на системата.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="167"/> <source>Setup Failed</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="192"/> <source>Calamares Initialization Failed</source> <translation>Инициализацията на Calamares се провали</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="193"/> <source>%1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution.</source> <translation>%1 не може да се инсталира. Calamares не можа да зареди всичките конфигурирани модули. Това е проблем с начина, по който Calamares е използван от дистрибуцията.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="198"/> <source><br/>The following modules could not be loaded:</source> <translation><br/>Следните модули не могат да се заредят:</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="252"/> <source>Continue with installation?</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="254"/> <source>The %1 setup program is about to make changes to your disk in order to set up %2.<br/><strong>You will not be able to undo these changes.</strong></source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="261"/> <source>&Set up now</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="307"/> <source>&Set up</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="308"/> <source>&Install</source> <translation>&Инсталирай</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="310"/> <source>Setup is complete. Close the setup program.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="372"/> <source>Cancel setup?</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="373"/> <source>Cancel installation?</source> <translation>Отмяна на инсталацията?</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="375"/> <source>Do you really want to cancel the current setup process? The setup program will quit and all changes will be lost.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="377"/> <source>Do you really want to cancel the current install process? The installer will quit and all changes will be lost.</source> <translation>Наистина ли искате да отмените текущият процес на инсталиране? Инсталатора ще прекъсне и всичките промени ще бъдат загубени.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="385"/> <source>&Yes</source> <translation>&Да</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="386"/> <source>&No</source> <translation>&Не</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="174"/> <source>&Close</source> <translation>&Затвори</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="251"/> <source>Continue with setup?</source> <translation>Продължаване?</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="257"/> <source>The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong></source> <translation>Инсталатора на %1 ще направи промени по вашия диск за да инсталира %2. <br><strong>Промените ще бъдат окончателни.</strong></translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="262"/> <source>&Install now</source> <translation>&Инсталирай сега</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="269"/> <source>Go &back</source> <translation>В&ръщане</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="323"/> <source>&Done</source> <translation>&Готово</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="311"/> <source>The installation is complete. Close the installer.</source> <translation>Инсталацията е завършена. Затворете инсталаторa.</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="171"/> <source>Error</source> <translation>Грешка</translation> </message> <message> <location filename="../src/libcalamaresui/ViewManager.cpp" line="168"/> <source>Installation Failed</source> <translation>Неуспешна инсталация</translation> </message> </context> <context> <name>CalamaresPython::Helper</name> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="270"/> <source>Unknown exception type</source> <translation>Неизвестен тип изключение</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="284"/> <source>unparseable Python error</source> <translation>неанализируема грешка на Python</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="324"/> <source>unparseable Python traceback</source> <translation>неанализируемо проследяване на Python</translation> </message> <message> <location filename="../src/libcalamares/PythonHelper.cpp" line="329"/> <source>Unfetchable Python error.</source> <translation>Недостъпна грешка на Python.</translation> </message> </context> <context> <name>CalamaresWindow</name> <message> <location filename="../src/calamares/CalamaresWindow.cpp" line="61"/> <source>%1 Setup Program</source> <translation type="unfinished"/> </message> <message> <location filename="../src/calamares/CalamaresWindow.cpp" line="62"/> <source>%1 Installer</source> <translation>%1 Инсталатор</translation> </message> <message> <location filename="../src/calamares/CalamaresWindow.cpp" line="131"/> <source>Show debug information</source> <translation>Покажи информация за отстраняване на грешки</translation> </message> </context> <context> <name>CheckerContainer</name> <message> <location filename="../src/modules/welcome/checker/CheckerContainer.cpp" line="45"/> <source>Gathering system information...</source> <translation>Събиране на системна информация...</translation> </message> </context> <context> <name>ChoicePage</name> <message> <location filename="../src/modules/partition/gui/ChoicePage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="154"/> <source>After:</source> <translation>След:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="330"/> <source><strong>Manual partitioning</strong><br/>You can create or resize partitions yourself.</source> <translation><strong>Самостоятелно поделяне</strong><br/>Можете да създадете или преоразмерите дяловете сами.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1025"/> <source>Boot loader location:</source> <translation>Локация на програмата за начално зареждане:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="152"/> <source>Select storage de&vice:</source> <translation>Изберете ус&тройство за съхранение:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="153"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="951"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="997"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1076"/> <source>Current:</source> <translation>Сегашен:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="827"/> <source>Reuse %1 as home partition for %2.</source> <translation>Използване на %1 като домашен дял за %2</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="952"/> <source><strong>Select a partition to shrink, then drag the bottom bar to resize</strong></source> <translation><strong>Изберете дял за смаляване, после влачете долната лента за преоразмеряване</strong></translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="969"/> <source>%1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1067"/> <source><strong>Select a partition to install on</strong></source> <translation><strong>Изберете дял за инсталацията</strong></translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1123"/> <source>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source> <translation>EFI системен дял не е намерен. Моля, опитайте пак като използвате ръчно поделяне за %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1132"/> <source>The EFI system partition at %1 will be used for starting %2.</source> <translation>EFI системен дял в %1 ще бъде използван за стартиране на %2.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1140"/> <source>EFI system partition:</source> <translation>EFI системен дял:</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1258"/> <source>This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>Това устройство за съхранение няма инсталирана операционна система. Какво ще правите?<br/>Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1263"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1301"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1324"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1350"/> <source><strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device.</source> <translation><strong>Изтриване на диска</strong><br/>Това ще <font color="red">изтрие</font> всички данни върху устройството за съхранение.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1291"/> <source>This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>Това устройство за съхранение има инсталиран %1. Какво ще правите?<br/>Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1495"/> <source>No Swap</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1500"/> <source>Reuse Swap</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1503"/> <source>Swap (no Hibernate)</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1506"/> <source>Swap (with Hibernate)</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1509"/> <source>Swap to file</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1267"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1297"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1320"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1346"/> <source><strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1.</source> <translation><strong>Инсталирайте покрай</strong><br/>Инсталатора ще раздроби дяла за да направи място за %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1271"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1306"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1328"/> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1354"/> <source><strong>Replace a partition</strong><br/>Replaces a partition with %1.</source> <translation><strong>Замени дял</strong><br/>Заменя този дял с %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1315"/> <source>This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>Това устройство за съхранение има инсталирана операционна система. Какво ще правите?<br/>Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation> </message> <message> <location filename="../src/modules/partition/gui/ChoicePage.cpp" line="1341"/> <source>This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.</source> <translation>Това устройство за съхранение има инсталирани операционни системи. Какво ще правите?<br/>Ще може да прегледате и потвърдите избора си, преди да се направят промени по устройството за съхранение.</translation> </message> </context> <context> <name>ClearMountsJob</name> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="47"/> <source>Clear mounts for partitioning operations on %1</source> <translation>Разчисти монтиранията за операциите на подялбата на %1</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="55"/> <source>Clearing mounts for partitioning operations on %1.</source> <translation>Разчистване на монтиранията за операциите на подялбата на %1</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearMountsJob.cpp" line="192"/> <source>Cleared all mounts for %1</source> <translation>Разчистени всички монтирания за %1</translation> </message> </context> <context> <name>ClearTempMountsJob</name> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="42"/> <source>Clear all temporary mounts.</source> <translation>Разчисти всички временни монтирания.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="49"/> <source>Clearing all temporary mounts.</source> <translation>Разчистване на всички временни монтирания.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="60"/> <source>Cannot get list of temporary mounts.</source> <translation>Не може да се вземе лист от временни монтирания.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ClearTempMountsJob.cpp" line="99"/> <source>Cleared all temporary mounts.</source> <translation>Разчистени всички временни монтирания.</translation> </message> </context> <context> <name>CommandList</name> <message> <location filename="../src/libcalamares/utils/CommandList.cpp" line="128"/> <location filename="../src/libcalamares/utils/CommandList.cpp" line="139"/> <source>Could not run command.</source> <translation>Командата не може да се изпълни.</translation> </message> <message> <location filename="../src/libcalamares/utils/CommandList.cpp" line="129"/> <source>The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.</source> <translation>Командата се изпълнява в средата на хоста и трябва да установи местоположението на основния дял, но rootMountPoint не е определен.</translation> </message> <message> <location filename="../src/libcalamares/utils/CommandList.cpp" line="140"/> <source>The command needs to know the user's name, but no username is defined.</source> <translation>Командата трябва да установи потребителското име на профила, но такова не е определено.</translation> </message> </context> <context> <name>ContextualProcessJob</name> <message> <location filename="../src/modules/contextualprocess/ContextualProcessJob.cpp" line="117"/> <source>Contextual Processes Job</source> <translation>Задача с контекстуални процеси</translation> </message> </context> <context> <name>CreatePartitionDialog</name> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="14"/> <source>Create a Partition</source> <translation>Създай дял</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="48"/> <source> MiB</source> <translation>MiB</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="55"/> <source>Partition &Type:</source> <translation>&Тип на дяла:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="67"/> <source>&Primary</source> <translation>&Основен</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="77"/> <source>E&xtended</source> <translation>Р&азширен</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="119"/> <source>Fi&le System:</source> <translation>Фа&йлова система:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="151"/> <source>LVM LV name</source> <translation>LVM LV име</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="188"/> <source>Flags:</source> <translation>Флагове:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="161"/> <source>&Mount Point:</source> <translation>Точка на &монтиране:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.ui" line="38"/> <source>Si&ze:</source> <translation>Раз&мер:</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="72"/> <source>En&crypt</source> <translation>Ши&фриране</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="151"/> <source>Logical</source> <translation>Логическа</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="156"/> <source>Primary</source> <translation>Главна</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="173"/> <source>GPT</source> <translation>GPT</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionDialog.cpp" line="262"/> <source>Mountpoint already in use. Please select another one.</source> <translation>Точката за монтиране вече се използва. Моля изберете друга.</translation> </message> </context> <context> <name>CreatePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="44"/> <source>Create new %2MiB partition on %4 (%3) with file system %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="55"/> <source>Create new <strong>%2MiB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="67"/> <source>Creating new %1 partition on %2.</source> <translation>Създаване на нов %1 дял върху %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionJob.cpp" line="79"/> <source>The installer failed to create partition on disk '%1'.</source> <translation>Инсталатора не успя да създаде дял върху диск '%1'.</translation> </message> </context> <context> <name>CreatePartitionTableDialog</name> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="20"/> <source>Create Partition Table</source> <translation>Създай таблица на дяловете</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="39"/> <source>Creating a new partition table will delete all existing data on the disk.</source> <translation>Създаването на нова таблица на дяловете ще изтрие всички съществуващи данни на диска.</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="65"/> <source>What kind of partition table do you want to create?</source> <translation>Какъв тип таблица на дяловете искате да създадете?</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="72"/> <source>Master Boot Record (MBR)</source> <translation>Сектор за начално зареждане (MBR)</translation> </message> <message> <location filename="../src/modules/partition/gui/CreatePartitionTableDialog.ui" line="82"/> <source>GUID Partition Table (GPT)</source> <translation>GUID Таблица на дяловете (GPT)</translation> </message> </context> <context> <name>CreatePartitionTableJob</name> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="47"/> <source>Create new %1 partition table on %2.</source> <translation>Създай нова %1 таблица на дяловете върху %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="54"/> <source>Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3).</source> <translation>Създай нова <strong>%1</strong> таблица на дяловете върху <strong>%2</strong> (%3).</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="64"/> <source>Creating new %1 partition table on %2.</source> <translation>Създаване на нова %1 таблица на дяловете върху %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/CreatePartitionTableJob.cpp" line="82"/> <source>The installer failed to create a partition table on %1.</source> <translation>Инсталатора не можа да създаде таблица на дяловете върху %1.</translation> </message> </context> <context> <name>CreateUserJob</name> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="51"/> <source>Create user %1</source> <translation>Създай потребител %1</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="58"/> <source>Create user <strong>%1</strong>.</source> <translation>Създай потребител <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="65"/> <source>Creating user %1.</source> <translation>Създаване на потребител %1.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="81"/> <source>Sudoers dir is not writable.</source> <translation>Директорията sudoers е незаписваема.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="85"/> <source>Cannot create sudoers file for writing.</source> <translation>Не може да се създаде sudoers файл за записване.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="93"/> <source>Cannot chmod sudoers file.</source> <translation>Не може да се изпълни chmod върху sudoers файла.</translation> </message> <message> <location filename="../src/modules/users/CreateUserJob.cpp" line="99"/> <source>Cannot open groups file for reading.</source> <translation>Не може да се отвори файла на групите за четене.</translation> </message> </context> <context> <name>CreateVolumeGroupDialog</name> <message> <location filename="../src/modules/partition/gui/CreateVolumeGroupDialog.cpp" line="37"/> <source>Create Volume Group</source> <translation type="unfinished"/> </message> </context> <context> <name>CreateVolumeGroupJob</name> <message> <location filename="../src/modules/partition/jobs/CreateVolumeGroupJob.cpp" line="38"/> <source>Create new volume group named %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/CreateVolumeGroupJob.cpp" line="45"/> <source>Create new volume group named <strong>%1</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/CreateVolumeGroupJob.cpp" line="52"/> <source>Creating new volume group named %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/CreateVolumeGroupJob.cpp" line="65"/> <source>The installer failed to create a volume group named '%1'.</source> <translation type="unfinished"/> </message> </context> <context> <name>DeactivateVolumeGroupJob</name> <message> <location filename="../src/modules/partition/jobs/DeactivateVolumeGroupJob.cpp" line="34"/> <location filename="../src/modules/partition/jobs/DeactivateVolumeGroupJob.cpp" line="48"/> <source>Deactivate volume group named %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/DeactivateVolumeGroupJob.cpp" line="41"/> <source>Deactivate volume group named <strong>%1</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/DeactivateVolumeGroupJob.cpp" line="61"/> <source>The installer failed to deactivate a volume group named %1.</source> <translation type="unfinished"/> </message> </context> <context> <name>DeletePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="40"/> <source>Delete partition %1.</source> <translation>Изтрий дял %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="48"/> <source>Delete partition <strong>%1</strong>.</source> <translation>Изтриване на дял <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="56"/> <source>Deleting partition %1.</source> <translation>Изтриване на дял %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/DeletePartitionJob.cpp" line="68"/> <source>The installer failed to delete partition %1.</source> <translation>Инсталатора не успя да изтрие дял %1.</translation> </message> </context> <context> <name>DeviceInfoWidget</name> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="151"/> <source>The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred.</source> <translation>Типа на <strong>таблицата на дяловете</strong> на избраното устройство за съхранение.<br><br>Единствения начин да се промени е като се изчисти и пресъздаде таблицата на дяловете, като по този начин всички данни върху устройството ще бъдат унищожени.<br>Инсталатора ще запази сегашната таблица на дяловете, освен ако не изберете обратното.<br>Ако не сте сигурни - за модерни системи се препоръчва GPT.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="108"/> <source>This device has a <strong>%1</strong> partition table.</source> <translation>Устройството има <strong>%1</strong> таблица на дяловете.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="115"/> <source>This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.</source> <translation>Това е <strong>loop</strong> устройство.<br><br>Представлява псевдо-устройство, без таблица на дяловете, което прави файловете достъпни като блок устройства. Обикновено съдържа само една файлова система.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="122"/> <source>This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page.</source> <translation>Инсталатора <strong>не може да открие таблица на дяловете</strong> на избраното устройство за съхранение.<br><br>Таблицата на дяловете липсва, повредена е или е от неизвестен тип.<br>Инсталатора може да създаде нова таблица на дяловете автоматично или ръчно, чрез програмата за подялба.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="132"/> <source><br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment.</source> <translation><br><br>Това е препоръчаният тип на таблицата на дяловете за модерни системи, които стартират от <strong>EFI</strong> среда за начално зареждане.</translation> </message> <message> <location filename="../src/modules/partition/gui/DeviceInfoWidget.cpp" line="138"/> <source><br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions.</source> <translation><br><br>Тази таблица на дяловете е препоръчителна само за стари системи, които стартират с <strong>BIOS</strong> среда за начално зареждане. GPT е препоръчителна в повечето случаи.<br><br><strong>Внимание:</strong> MBR таблица на дяловете е остарял стандарт от времето на MS-DOS.<br>Само 4 <em>главни</em> дяла могат да бъдат създадени и от тях само един може да е <em>разширен</em> дял, който може да съдържа много <em>логически</em> дялове.</translation> </message> </context> <context> <name>DeviceModel</name> <message> <location filename="../src/modules/partition/core/DeviceModel.cpp" line="92"/> <source>%1 - %2 (%3)</source> <extracomment>device[name] - size[number] (device-node[name])</extracomment> <translation>%1 - %2 (%3)</translation> </message> <message> <location filename="../src/modules/partition/core/DeviceModel.cpp" line="103"/> <source>%1 - (%2)</source> <extracomment>device[name] - (device-node[name])</extracomment> <translation type="unfinished"/> </message> </context> <context> <name>DracutLuksCfgJob</name> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="131"/> <source>Write LUKS configuration for Dracut to %1</source> <translation>Запиши LUKS конфигурация за Dracut на %1</translation> </message> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="133"/> <source>Skip writing LUKS configuration for Dracut: "/" partition is not encrypted</source> <translation>Пропусни записването на LUKS конфигурация за Dracut: "/" дял не е шифриран</translation> </message> <message> <location filename="../src/modules/dracutlukscfg/DracutLuksCfgJob.cpp" line="149"/> <source>Failed to open %1</source> <translation>Неуспешно отваряне на %1</translation> </message> </context> <context> <name>DummyCppJob</name> <message> <location filename="../src/modules/dummycpp/DummyCppJob.cpp" line="47"/> <source>Dummy C++ Job</source> <translation>Фиктивна С++ задача</translation> </message> </context> <context> <name>EditExistingPartitionDialog</name> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="20"/> <source>Edit Existing Partition</source> <translation>Редактирай съществуващ дял</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="50"/> <source>Content:</source> <translation>Съдържание:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="60"/> <source>&Keep</source> <translation>&Запази</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="70"/> <source>Format</source> <translation>Форматирай</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="89"/> <source>Warning: Formatting the partition will erase all existing data.</source> <translation>Предупреждение: Форматирането на дялът ще изтрие всички съществуващи данни.</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="99"/> <source>&Mount Point:</source> <translation>&Точка на монтиране:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="119"/> <source>Si&ze:</source> <translation>Раз&мер:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="129"/> <source> MiB</source> <translation>MiB</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="136"/> <source>Fi&le System:</source> <translation>Фа&йлова система:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.ui" line="149"/> <source>Flags:</source> <translation>Флагове:</translation> </message> <message> <location filename="../src/modules/partition/gui/EditExistingPartitionDialog.cpp" line="269"/> <source>Mountpoint already in use. Please select another one.</source> <translation>Точката за монтиране вече се използва. Моля изберете друга.</translation> </message> </context> <context> <name>EncryptWidget</name> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="32"/> <source>En&crypt system</source> <translation>Крип&тиране на системата</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="42"/> <source>Passphrase</source> <translation>Парола</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.ui" line="52"/> <source>Confirm passphrase</source> <translation>Потвърди паролата</translation> </message> <message> <location filename="../src/modules/partition/gui/EncryptWidget.cpp" line="151"/> <source>Please enter the same passphrase in both boxes.</source> <translation>Моля, въведете еднаква парола в двете полета.</translation> </message> </context> <context> <name>FillGlobalStorageJob</name> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="130"/> <source>Set partition information</source> <translation>Постави информация за дял</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="153"/> <source>Install %1 on <strong>new</strong> %2 system partition.</source> <translation>Инсталирай %1 на <strong>нов</strong> %2 системен дял.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="157"/> <source>Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>.</source> <translation>Създай <strong>нов</strong> %2 дял със точка на монтиране <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="165"/> <source>Install %2 on %3 system partition <strong>%1</strong>.</source> <translation>Инсталирай %2 на %3 системен дял <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="170"/> <source>Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>.</source> <translation>Създай %3 дял <strong>%1</strong> с точка на монтиране <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="182"/> <source>Install boot loader on <strong>%1</strong>.</source> <translation>Инсталиране на зареждач върху <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FillGlobalStorageJob.cpp" line="192"/> <source>Setting up mount points.</source> <translation>Настройка на точките за монтиране.</translation> </message> </context> <context> <name>FinishedPage</name> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="95"/> <source><Restart checkbox tooltip></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedPage.ui" line="98"/> <source>&Restart now</source> <translation>&Рестартирай сега</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="54"/> <source><h1>All done.</h1><br/>%1 has been set up on your computer.<br/>You may now start using your new system.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="58"/> <source><html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the setup program.</p></body></html></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="66"/> <source><h1>All done.</h1><br/>%1 has been installed on your computer.<br/>You may now restart into your new system, or continue using the %2 Live environment.</source> <translation><h1>Завършено.</h1><br/>%1 беше инсталирана на вашият компютър.<br/>Вече можете да рестартирате в новата си система или да продължите да използвате %2 Живата среда.</translation> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="71"/> <source><html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the installer.</p></body></html></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="127"/> <source><h1>Setup Failed</h1><br/>%1 has not been set up on your computer.<br/>The error message was: %2.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedPage.cpp" line="133"/> <source><h1>Installation Failed</h1><br/>%1 has not been installed on your computer.<br/>The error message was: %2.</source> <translation><h1>Инсталацията е неуспешна</h1><br/>%1 не е инсталиран на Вашия компютър.<br/>Съобщението с грешката е: %2.</translation> </message> </context> <context> <name>FinishedViewStep</name> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="78"/> <source>Finish</source> <translation>Завърши</translation> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="132"/> <source>Setup Complete</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="133"/> <source>Installation Complete</source> <translation>Инсталацията е завършена</translation> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="135"/> <source>The setup of %1 is complete.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/finished/FinishedViewStep.cpp" line="136"/> <source>The installation of %1 is complete.</source> <translation>Инсталацията на %1 е завършена.</translation> </message> </context> <context> <name>FormatPartitionJob</name> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="41"/> <source>Format partition %1 (file system: %2, size: %3 MiB) on %4.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="52"/> <source>Format <strong>%3MiB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="63"/> <source>Formatting partition %1 with file system %2.</source> <translation>Форматирай дял %1 с файлова система %2.</translation> </message> <message> <location filename="../src/modules/partition/jobs/FormatPartitionJob.cpp" line="77"/> <source>The installer failed to format partition %1 on disk '%2'.</source> <translation>Инсталатора не успя да форматира дял %1 на диск '%2'.</translation> </message> </context> <context> <name>GeneralRequirements</name> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="108"/> <source>has at least %1 GiB available drive space</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="109"/> <source>There is not enough drive space. At least %1 GiB is required.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="116"/> <source>has at least %1 GiB working memory</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="117"/> <source>The system does not have enough working memory. At least %1 GiB is required.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="124"/> <source>is plugged in to a power source</source> <translation>е включен към източник на захранване</translation> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="125"/> <source>The system is not plugged in to a power source.</source> <translation>Системата не е включена към източник на захранване.</translation> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="132"/> <source>is connected to the Internet</source> <translation>е свързан към интернет</translation> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="133"/> <source>The system is not connected to the Internet.</source> <translation>Системата не е свързана с интернет.</translation> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="142"/> <source>The setup program is not running with administrator rights.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="143"/> <source>The installer is not running with administrator rights.</source> <translation>Инсталаторът не е стартиран с права на администратор.</translation> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="152"/> <source>The screen is too small to display the setup program.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/GeneralRequirements.cpp" line="153"/> <source>The screen is too small to display the installer.</source> <translation>Екранът е твърде малък за инсталатора.</translation> </message> </context> <context> <name>IDJob</name> <message> <location filename="../src/modules/oemid/IDJob.cpp" line="38"/> <location filename="../src/modules/oemid/IDJob.cpp" line="47"/> <location filename="../src/modules/oemid/IDJob.cpp" line="59"/> <location filename="../src/modules/oemid/IDJob.cpp" line="67"/> <source>OEM Batch Identifier</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/IDJob.cpp" line="48"/> <source>Could not create directories <code>%1</code>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/IDJob.cpp" line="60"/> <source>Could not open file <code>%1</code>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/IDJob.cpp" line="68"/> <source>Could not write to file <code>%1</code>.</source> <translation type="unfinished"/> </message> </context> <context> <name>InteractiveTerminalPage</name> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="53"/> <source>Konsole not installed</source> <translation>Konsole не е инсталиран</translation> </message> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="54"/> <source>Please install KDE Konsole and try again!</source> <translation>Моля, инсталирайте KDE Konsole и опитайте отново!</translation> </message> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalPage.cpp" line="116"/> <source>Executing script: &nbsp;<code>%1</code></source> <translation>Изпълняване на скрипт: &nbsp;<code>%1</code></translation> </message> </context> <context> <name>InteractiveTerminalViewStep</name> <message> <location filename="../src/modules/interactiveterminal/InteractiveTerminalViewStep.cpp" line="45"/> <source>Script</source> <translation>Скрипт</translation> </message> </context> <context> <name>KeyboardPage</name> <message> <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="219"/> <source>Set keyboard model to %1.<br/></source> <translation>Постави модел на клавиатурата на %1.<br/></translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.cpp" line="223"/> <source>Set keyboard layout to %1/%2.</source> <translation>Постави оформлението на клавиатурата на %1/%2.</translation> </message> </context> <context> <name>KeyboardViewStep</name> <message> <location filename="../src/modules/keyboard/KeyboardViewStep.cpp" line="50"/> <source>Keyboard</source> <translation>Клавиатура</translation> </message> </context> <context> <name>LCLocaleDialog</name> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="34"/> <source>System locale setting</source> <translation>Настройка на локацията на системата</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="41"/> <source>The system locale setting affects the language and character set for some command line user interface elements.<br/>The current setting is <strong>%1</strong>.</source> <translation>Локацията на системата засяга езика и символите зададени за някои елементи на командния ред.<br/>Текущата настройка е <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="66"/> <source>&Cancel</source> <translation>&Отказ</translation> </message> <message> <location filename="../src/modules/locale/LCLocaleDialog.cpp" line="67"/> <source>&OK</source> <translation>&ОК</translation> </message> </context> <context> <name>LicensePage</name> <message> <location filename="../src/modules/license/LicensePage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="123"/> <source>I accept the terms and conditions above.</source> <translation>Приемам лицензионните условия.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="146"/> <source><h1>License Agreement</h1>This setup procedure will install proprietary software that is subject to licensing terms.</source> <translation><h1>Лицензионно Споразумение</h1>Тази процедура ще инсталира несвободен софтуер, който е обект на лицензионни условия.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="149"/> <source>Please review the End User License Agreements (EULAs) above.<br/>If you do not agree with the terms, the setup procedure cannot continue.</source> <translation>Моля погледнете Лицензионните Условия за Крайния Потребител (ЛУКП).<br/>Ако не сте съгласни с условията, процедурата не може да продължи.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="155"/> <source><h1>License Agreement</h1>This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.</source> <translation><h1>Лицензионно Споразумение</h1>Тази процедура може да инсталира несвободен софтуер, който е обект на лицензионни условия, за да предостави допълнителни функции и да подобри работата на потребителя.</translation> </message> <message> <location filename="../src/modules/license/LicensePage.cpp" line="160"/> <source>Please review the End User License Agreements (EULAs) above.<br/>If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.</source> <translation>Моля погледнете Лицензионните Условия за Крайния Потребител (ЛУКП).<br/>Ако не сте съгласни с условията, несвободния софтуер няма да бъде инсталиран и ще бъдат използвани безплатни алтернативи.</translation> </message> </context> <context> <name>LicenseViewStep</name> <message> <location filename="../src/modules/license/LicenseViewStep.cpp" line="51"/> <source>License</source> <translation>Лиценз</translation> </message> </context> <context> <name>LicenseWidget</name> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="122"/> <source><strong>%1 driver</strong><br/>by %2</source> <extracomment>%1 is an untranslatable product name, example: Creative Audigy driver</extracomment> <translation><strong>%1 драйвър</strong><br/>от %2</translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="129"/> <source><strong>%1 graphics driver</strong><br/><font color="Grey">by %2</font></source> <extracomment>%1 is usually a vendor name, example: Nvidia graphics driver</extracomment> <translation><strong>%1 графичен драйвър</strong><br/><font color="Grey">от %2</font></translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="135"/> <source><strong>%1 browser plugin</strong><br/><font color="Grey">by %2</font></source> <translation><strong>%1 плъгин за браузър</strong><br/><font color="Grey">от %2</font></translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="141"/> <source><strong>%1 codec</strong><br/><font color="Grey">by %2</font></source> <translation><strong>%1 кодек</strong><br/><font color="Grey">от %2</font></translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="147"/> <source><strong>%1 package</strong><br/><font color="Grey">by %2</font></source> <translation><strong>%1 пакет</strong><br/><font color="Grey">от %2</font></translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="153"/> <source><strong>%1</strong><br/><font color="Grey">by %2</font></source> <translation><strong>%1</strong><br/><font color="Grey">от %2</font></translation> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="191"/> <source>Shows the complete license text</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="192"/> <source>Hide license text</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="196"/> <source>Show license agreement</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="197"/> <source>Hide license agreement</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="201"/> <source>Opens the license agreement in a browser window.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/license/LicenseWidget.cpp" line="202"/> <source><a href="%1">View license agreement</a></source> <translation type="unfinished"/> </message> </context> <context> <name>LocalePage</name> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="396"/> <source>The system language will be set to %1.</source> <translation>Системният език ще бъде %1.</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="397"/> <source>The numbers and dates locale will be set to %1.</source> <translation>Форматът на цифрите и датата ще бъде %1.</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="219"/> <source>Region:</source> <translation>Регион:</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="220"/> <source>Zone:</source> <translation>Зона:</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="224"/> <location filename="../src/modules/locale/LocalePage.cpp" line="225"/> <source>&Change...</source> <translation>&Промени...</translation> </message> <message> <location filename="../src/modules/locale/LocalePage.cpp" line="404"/> <source>Set timezone to %1/%2.<br/></source> <translation>Постави часовата зона на %1/%2.<br/></translation> </message> </context> <context> <name>LocaleViewStep</name> <message> <location filename="../src/modules/locale/LocaleViewStep.cpp" line="55"/> <source>Loading location data...</source> <translation>Зареждане на данните за местоположение</translation> </message> <message> <location filename="../src/modules/locale/LocaleViewStep.cpp" line="132"/> <source>Location</source> <translation>Местоположение</translation> </message> </context> <context> <name>NetInstallPage</name> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="62"/> <source>Name</source> <translation>Име</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="63"/> <source>Description</source> <translation>Описание</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="84"/> <source>Network Installation. (Disabled: Unable to fetch package lists, check your network connection)</source> <translation>Мрежова инсталация. (Изключена: Списъкът с пакети не може да бъде извлечен, проверете Вашата Интернет връзка)</translation> </message> <message> <location filename="../src/modules/netinstall/NetInstallPage.cpp" line="94"/> <source>Network Installation. (Disabled: Received invalid groups data)</source> <translation>Мрежова инсталация. (Изключена: Получени са данни за невалидни групи)</translation> </message> </context> <context> <name>NetInstallViewStep</name> <message> <location filename="../src/modules/netinstall/NetInstallViewStep.cpp" line="54"/> <source>Package selection</source> <translation>Избор на пакети</translation> </message> </context> <context> <name>OEMPage</name> <message> <location filename="../src/modules/oemid/OEMPage.ui" line="28"/> <source>Ba&tch:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/OEMPage.ui" line="38"/> <source><html><head/><body><p>Enter a batch-identifier here. This will be stored in the target system.</p></body></html></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/OEMPage.ui" line="48"/> <source><html><head/><body><h1>OEM Configuration</h1><p>Calamares will use OEM settings while configuring the target system.</p></body></html></source> <translation type="unfinished"/> </message> </context> <context> <name>OEMViewStep</name> <message> <location filename="../src/modules/oemid/OEMViewStep.cpp" line="115"/> <source>OEM Configuration</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/oemid/OEMViewStep.cpp" line="120"/> <source>Set the OEM Batch Identifier to <code>%1</code>.</source> <translation type="unfinished"/> </message> </context> <context> <name>PWQ</name> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="63"/> <source>Password is too short</source> <translation>Паролата е твърде кратка</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="85"/> <source>Password is too long</source> <translation>Паролата е твърде дълга</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="169"/> <source>Password is too weak</source> <translation>Паролата е твърде слаба</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="176"/> <source>Memory allocation error when setting '%1'</source> <translation>Грешка при разпределяне на паметта по време на настройването на '%1'</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="180"/> <source>Memory allocation error</source> <translation>Грешка при разпределяне на паметта</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="182"/> <source>The password is the same as the old one</source> <translation>Паролата съвпада с предишната</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="184"/> <source>The password is a palindrome</source> <translation>Паролата е палиндром</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="186"/> <source>The password differs with case changes only</source> <translation>Паролата се различава само със смяна на главни и малки букви</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="188"/> <source>The password is too similar to the old one</source> <translation>Паролата е твърде сходна с предишната</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="190"/> <source>The password contains the user name in some form</source> <translation>Паролата съдържа потребителското име под някаква форма</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="192"/> <source>The password contains words from the real name of the user in some form</source> <translation>Паролата съдържа думи от истинското име на потребителя под някаква форма</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="194"/> <source>The password contains forbidden words in some form</source> <translation>Паролата съдържа забранени думи под някаква форма</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="197"/> <source>The password contains less than %1 digits</source> <translation>Паролата съдържа по-малко от %1 цифри</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="198"/> <source>The password contains too few digits</source> <translation>Паролата съдържа твърде малко цифри</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="201"/> <source>The password contains less than %1 uppercase letters</source> <translation>Паролата съдържа по-малко от %1 главни букви</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="202"/> <source>The password contains too few uppercase letters</source> <translation>Паролата съдържа твърде малко главни букви</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="205"/> <source>The password contains less than %1 lowercase letters</source> <translation>Паролата съдържа по-малко от %1 малки букви</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="206"/> <source>The password contains too few lowercase letters</source> <translation>Паролата съдържа твърде малко малки букви</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="209"/> <source>The password contains less than %1 non-alphanumeric characters</source> <translation>Паролата съдържа по-малко от %1 знаци, които не са букви или цифри</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="210"/> <source>The password contains too few non-alphanumeric characters</source> <translation>Паролата съдържа твърде малко знаци, които не са букви или цифри</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="213"/> <source>The password is shorter than %1 characters</source> <translation>Паролата е по-малка от %1 знаци</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="214"/> <source>The password is too short</source> <translation>Паролата е твърде кратка</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="216"/> <source>The password is just rotated old one</source> <translation>Паролата е обърнат вариант на старата</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="219"/> <source>The password contains less than %1 character classes</source> <translation>Паролата съдържа по-малко от %1 видове знаци</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="220"/> <source>The password does not contain enough character classes</source> <translation>Паролата не съдържа достатъчно видове знаци</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="223"/> <source>The password contains more than %1 same characters consecutively</source> <translation>Паролата съдържа повече от %1 еднакви знаци последователно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="224"/> <source>The password contains too many same characters consecutively</source> <translation>Паролата съдържа твърде много еднакви знаци последователно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="227"/> <source>The password contains more than %1 characters of the same class consecutively</source> <translation>Паролата съдържа повече от %1 еднакви видове знаци последователно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="228"/> <source>The password contains too many characters of the same class consecutively</source> <translation>Паролата съдържа твърде много еднакви видове знаци последователно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="231"/> <source>The password contains monotonic sequence longer than %1 characters</source> <translation>Паролата съдържа монотонна последователност, по-дълга от %1 знаци</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="232"/> <source>The password contains too long of a monotonic character sequence</source> <translation>Паролата съдържа твърде дълга монотонна последователност от знаци</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="234"/> <source>No password supplied</source> <translation>Липсва парола</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="236"/> <source>Cannot obtain random numbers from the RNG device</source> <translation>Получаването на произволни числа от RNG устройството е неуспешно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="238"/> <source>Password generation failed - required entropy too low for settings</source> <translation>Генерирането на парола е неуспешно - необходимата ентропия е твърде ниска за настройки</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="243"/> <source>The password fails the dictionary check - %1</source> <translation>Паролата не издържа проверката на речника - %1</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="245"/> <source>The password fails the dictionary check</source> <translation>Паролата не издържа проверката на речника</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="249"/> <source>Unknown setting - %1</source> <translation>Неизвестна настройка - %1</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="253"/> <source>Unknown setting</source> <translation>Неизвестна настройка</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="257"/> <source>Bad integer value of setting - %1</source> <translation>Невалидна числена стойност на настройката - %1</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="261"/> <source>Bad integer value</source> <translation>Невалидна числена стойност на настройката</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="265"/> <source>Setting %1 is not of integer type</source> <translation>Настройката %1 не е от числов вид</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="269"/> <source>Setting is not of integer type</source> <translation>Настройката не е от числов вид</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="273"/> <source>Setting %1 is not of string type</source> <translation>Настройката %1 не е от текстов вид</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="277"/> <source>Setting is not of string type</source> <translation>Настройката не е от текстов вид</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="279"/> <source>Opening the configuration file failed</source> <translation>Отварянето на файла с конфигурацията е неуспешно</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="281"/> <source>The configuration file is malformed</source> <translation>Файлът с конфигурацията е деформиран</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="283"/> <source>Fatal failure</source> <translation>Фатална повреда</translation> </message> <message> <location filename="../src/modules/users/CheckPWQuality.cpp" line="285"/> <source>Unknown error</source> <translation>Неизвестна грешка</translation> </message> </context> <context> <name>Page_Keyboard</name> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="70"/> <source>Keyboard Model:</source> <translation>Модел на клавиатура:</translation> </message> <message> <location filename="../src/modules/keyboard/KeyboardPage.ui" line="131"/> <source>Type here to test your keyboard</source> <translation>Пишете тук за да тествате вашата клавиатура</translation> </message> </context> <context> <name>Page_UserSetup</name> <message> <location filename="../src/modules/users/page_usersetup.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="36"/> <source>What is your name?</source> <translation>Какво е вашето име?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="117"/> <source>What name do you want to use to log in?</source> <translation>Какво име искате да използвате за влизане?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="335"/> <source>Choose a password to keep your account safe.</source> <translation>Изберете парола за да държите вашият акаунт в безопасност.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="440"/> <source><small>Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.</small></source> <translation><small>Внесете същата парола два пъти, за да може да бъде проверена за правописни грешки. Добра парола ще съдържа смесица от букви, цифри и пунктуационни знаци, трябва да бъде поне с осем знака и да бъде променяна често.</small></translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="226"/> <source>What is the name of this computer?</source> <translation>Какво е името на този компютър?</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="309"/> <source><small>This name will be used if you make the computer visible to others on a network.</small></source> <translation><small>Това име ще бъде използвано ако направите компютъра видим за други при мрежа.</small></translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="466"/> <source>Log in automatically without asking for the password.</source> <translation>Влизайте автоматично, без питане за паролата.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="473"/> <source>Use the same password for the administrator account.</source> <translation>Използвайте същата парола за администраторския акаунт.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="496"/> <source>Choose a password for the administrator account.</source> <translation>Изберете парола за администраторския акаунт.</translation> </message> <message> <location filename="../src/modules/users/page_usersetup.ui" line="601"/> <source><small>Enter the same password twice, so that it can be checked for typing errors.</small></source> <translation><small>Внесете същата парола два пъти, за да може да бъде проверена за правописни грешки.</small></translation> </message> </context> <context> <name>PartitionLabelsView</name> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="197"/> <source>Root</source> <translation>Основен</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="200"/> <source>Home</source> <translation>Домашен</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="202"/> <source>Boot</source> <translation>Зареждане</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="205"/> <source>EFI system</source> <translation>EFI система</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="207"/> <source>Swap</source> <translation>Swap</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="209"/> <source>New partition for %1</source> <translation>Нов дял за %1</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="211"/> <source>New partition</source> <translation>Нов дял</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="230"/> <source>%1 %2</source> <extracomment>size[number] filesystem[name]</extracomment> <translation>%1 %2</translation> </message> </context> <context> <name>PartitionModel</name> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="144"/> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="176"/> <source>Free Space</source> <translation>Свободно пространство</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="148"/> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="180"/> <source>New partition</source> <translation>Нов дял</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="264"/> <source>Name</source> <translation>Име</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="266"/> <source>File System</source> <translation>Файлова система</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="268"/> <source>Mount Point</source> <translation>Точка на монтиране</translation> </message> <message> <location filename="../src/modules/partition/core/PartitionModel.cpp" line="270"/> <source>Size</source> <translation>Размер</translation> </message> </context> <context> <name>PartitionPage</name> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="22"/> <source>Storage de&vice:</source> <translation>Ус&тройство за съхранение"</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="51"/> <source>&Revert All Changes</source> <translation>&Възвърни всички промени</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="87"/> <source>New Partition &Table</source> <translation>Нова &таблица на дяловете</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="107"/> <source>Cre&ate</source> <translation>Съз&дай</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="114"/> <source>&Edit</source> <translation>&Редактирай</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="121"/> <source>&Delete</source> <translation>&Изтрий</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="132"/> <source>New Volume Group</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="139"/> <source>Resize Volume Group</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="146"/> <source>Deactivate Volume Group</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="153"/> <source>Remove Volume Group</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.ui" line="180"/> <source>I&nstall boot loader on:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="209"/> <source>Are you sure you want to create a new partition table on %1?</source> <translation>Сигурни ли сте че искате да създадете нова таблица на дяловете върху %1?</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="238"/> <source>Can not create new partition</source> <translation>Не може да се създаде нов дял</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionPage.cpp" line="239"/> <source>The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.</source> <translation>Таблицата на дяловете на %1 вече има %2 главни дялове, повече не може да се добавят. Моля, премахнете един главен дял и добавете разширен дял, на негово място.</translation> </message> </context> <context> <name>PartitionViewStep</name> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="77"/> <source>Gathering system information...</source> <translation>Събиране на системна информация...</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="129"/> <source>Partitions</source> <translation>Дялове</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="166"/> <source>Install %1 <strong>alongside</strong> another operating system.</source> <translation>Инсталирай %1 <strong>заедно</strong> с друга операционна система.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="170"/> <source><strong>Erase</strong> disk and install %1.</source> <translation><strong>Изтрий</strong> диска и инсталирай %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="174"/> <source><strong>Replace</strong> a partition with %1.</source> <translation><strong>Замени</strong> дял с %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="179"/> <source><strong>Manual</strong> partitioning.</source> <translation><strong>Ръчно</strong> поделяне.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="192"/> <source>Install %1 <strong>alongside</strong> another operating system on disk <strong>%2</strong> (%3).</source> <translation>Инсталирай %1 <strong>заедно</strong> с друга операционна система на диск <strong>%2</strong> (%3).</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="198"/> <source><strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1.</source> <translation><strong>Изтрий</strong> диск <strong>%2</strong> (%3) и инсталирай %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="204"/> <source><strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1.</source> <translation><strong>Замени</strong> дял на диск <strong>%2</strong> (%3) с %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="211"/> <source><strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2).</source> <translation><strong>Ръчно</strong> поделяне на диск <strong>%1</strong> (%2).</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="219"/> <source>Disk <strong>%1</strong> (%2)</source> <translation>Диск <strong>%1</strong> (%2)</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="247"/> <source>Current:</source> <translation>Сегашен:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="264"/> <source>After:</source> <translation>След:</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="406"/> <source>No EFI system partition configured</source> <translation>Няма конфигуриран EFI системен дял</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="407"/> <source>An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a FAT32 filesystem with the <strong>esp</strong> flag enabled and mount point <strong>%2</strong>.<br/><br/>You can continue without setting up an EFI system partition but your system may fail to start.</source> <translation>EFI системен дял е нужен за стартиране на %1.<br/><br/>За настройка на EFI системен дял се върнете назад и изберете или създайте FAT32 файлова система с включен <strong>esp</strong> флаг и точка на монтиране <strong>%2</strong>.<br/><br/>Може да продължите без EFI системен дял, но системата може да не успее да стартира.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="420"/> <source>EFI system partition flag not set</source> <translation>Не е зададен флаг на EFI системен дял</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="421"/> <source>An EFI system partition is necessary to start %1.<br/><br/>A partition was configured with mount point <strong>%2</strong> but its <strong>esp</strong> flag is not set.<br/>To set the flag, go back and edit the partition.<br/><br/>You can continue without setting the flag but your system may fail to start.</source> <translation>EFI системен дял е нужен за стартиране на %1.<br/><br/>Дялът беше конфигуриран с точка на монтиране <strong>%2</strong>, но неговия <strong>esp</strong> флаг не е включен.<br/>За да включите флага се върнете назад и редактирайте дяла.<br/><br/>Може да продължите без флага, но системата може да не успее да стартира.</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="456"/> <source>Boot partition not encrypted</source> <translation>Липсва криптиране на дял за начално зареждане</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="457"/> <source>A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="638"/> <source>has at least one disk device available.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/PartitionViewStep.cpp" line="639"/> <source>There are no partitons to install on.</source> <translation type="unfinished"/> </message> </context> <context> <name>PlasmaLnfJob</name> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="41"/> <source>Plasma Look-and-Feel Job</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="73"/> <location filename="../src/modules/plasmalnf/PlasmaLnfJob.cpp" line="74"/> <source>Could not select KDE Plasma Look-and-Feel package</source> <translation type="unfinished"/> </message> </context> <context> <name>PlasmaLnfPage</name> <message> <location filename="../src/modules/plasmalnf/page_plasmalnf.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="70"/> <source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is set up. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfPage.cpp" line="76"/> <source>Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.</source> <translation type="unfinished"/> </message> </context> <context> <name>PlasmaLnfViewStep</name> <message> <location filename="../src/modules/plasmalnf/PlasmaLnfViewStep.cpp" line="68"/> <source>Look-and-Feel</source> <translation type="unfinished"/> </message> </context> <context> <name>PreserveFiles</name> <message> <location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="84"/> <source>Saving files for later ...</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="122"/> <source>No files configured to save for later.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/preservefiles/PreserveFiles.cpp" line="176"/> <source>Not all of the configured files could be preserved.</source> <translation type="unfinished"/> </message> </context> <context> <name>ProcessResult</name> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="306"/> <source> There was no output from the command.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="307"/> <source> Output: </source> <translation> Резултат: </translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="310"/> <source>External command crashed.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="311"/> <source>Command <i>%1</i> crashed.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="316"/> <source>External command failed to start.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="317"/> <source>Command <i>%1</i> failed to start.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="321"/> <source>Internal error when starting command.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="322"/> <source>Bad parameters for process job call.</source> <translation>Невалидни параметри за извикване на задача за процес.</translation> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="325"/> <source>External command failed to finish.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="326"/> <source>Command <i>%1</i> failed to finish in %2 seconds.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="332"/> <source>External command finished with errors.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/utils/CalamaresUtilsSystem.cpp" line="333"/> <source>Command <i>%1</i> finished with exit code %2.</source> <translation type="unfinished"/> </message> </context> <context> <name>QObject</name> <message> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="91"/> <source>Default Keyboard Model</source> <translation>Модел на клавиатура по подразбиране</translation> </message> <message> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="133"/> <location filename="../src/modules/keyboard/keyboardwidget/keyboardglobal.cpp" line="168"/> <source>Default</source> <translation>По подразбиране</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="207"/> <source>unknown</source> <translation>неизвестна</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="209"/> <source>extended</source> <translation>разширена</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="211"/> <source>unformatted</source> <translation>неформатирана</translation> </message> <message> <location filename="../src/modules/partition/core/KPMHelpers.cpp" line="213"/> <source>swap</source> <translation>swap</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionLabelsView.cpp" line="51"/> <source>Unpartitioned space or unknown partition table</source> <translation>Неразделено пространство или неизвестна таблица на дяловете</translation> </message> <message> <location filename="../src/modules/partition/gui/PartitionDialogHelpers.cpp" line="47"/> <source>(no mount point)</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamaresui/modulesystem/RequirementsChecker.cpp" line="62"/> <source>Requirements checking for module <i>%1</i> is complete.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/libcalamares/locale/Label.cpp" line="44"/> <source>%1 (%2)</source> <extracomment>language[name] (country[name])</extracomment> <translation>%1 (%2)</translation> </message> </context> <context> <name>RemoveVolumeGroupJob</name> <message> <location filename="../src/modules/partition/jobs/RemoveVolumeGroupJob.cpp" line="34"/> <location filename="../src/modules/partition/jobs/RemoveVolumeGroupJob.cpp" line="48"/> <source>Remove Volume Group named %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/RemoveVolumeGroupJob.cpp" line="41"/> <source>Remove Volume Group named <strong>%1</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/RemoveVolumeGroupJob.cpp" line="61"/> <source>The installer failed to remove a volume group named '%1'.</source> <translation type="unfinished"/> </message> </context> <context> <name>ReplaceWidget</name> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="135"/> <source>Select where to install %1.<br/><font color="red">Warning: </font>this will delete all files on the selected partition.</source> <translation>Изберете къде да инсталирате %1.<br/><font color="red">Предупреждение: </font>това ще изтрие всички файлове върху избраният дял.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="161"/> <source>The selected item does not appear to be a valid partition.</source> <translation>Избраният предмет не изглежда да е валиден дял.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="169"/> <source>%1 cannot be installed on empty space. Please select an existing partition.</source> <translation>%1 не може да бъде инсталиран на празно пространство. Моля изберете съществуващ дял.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="179"/> <source>%1 cannot be installed on an extended partition. Please select an existing primary or logical partition.</source> <translation>%1 не може да бъде инсталиран върху разширен дял. Моля изберете съществуващ основен или логически дял.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="189"/> <source>%1 cannot be installed on this partition.</source> <translation>%1 не може да бъде инсталиран върху този дял.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="195"/> <source>Data partition (%1)</source> <translation>Дял на данните (%1)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="212"/> <source>Unknown system partition (%1)</source> <translation>Непознат системен дял (%1)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="217"/> <source>%1 system partition (%2)</source> <translation>%1 системен дял (%2)</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="228"/> <source><strong>%4</strong><br/><br/>The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.</source> <translation><strong>%4</strong><br/><br/>Дялът %1 е твърде малък за %2. Моля изберете дял с капацитет поне %3 ГБ.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="251"/> <source><strong>%2</strong><br/><br/>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.</source> <translation><strong>%2</strong><br/><br/>EFI системен дял не е намерен. Моля, опитайте пак като използвате ръчно поделяне за %1.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="262"/> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="279"/> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="303"/> <source><strong>%3</strong><br/><br/>%1 will be installed on %2.<br/><font color="red">Warning: </font>all data on partition %2 will be lost.</source> <translation><strong>%3</strong><br/><br/>%1 ще бъде инсталиран върху %2.<br/><font color="red">Предупреждение: </font>всички данни на дял %2 ще бъдат изгубени.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="271"/> <source>The EFI system partition at %1 will be used for starting %2.</source> <translation>EFI системен дял в %1 ще бъде използван за стартиране на %2.</translation> </message> <message> <location filename="../src/modules/partition/gui/ReplaceWidget.cpp" line="287"/> <source>EFI system partition:</source> <translation>EFI системен дял:</translation> </message> </context> <context> <name>ResizeFSJob</name> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="59"/> <source>Resize Filesystem Job</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="172"/> <source>Invalid configuration</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="173"/> <source>The file-system resize job has an invalid configuration and will not run.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="187"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="197"/> <source>KPMCore not Available</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="188"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="198"/> <source>Calamares cannot start KPMCore for the file-system resize job.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="206"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="215"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="228"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="237"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="254"/> <source>Resize Failed</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="207"/> <source>The filesystem %1 could not be found in this system, and cannot be resized.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="208"/> <source>The device %1 could not be found in this system, and cannot be resized.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="216"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="229"/> <source>The filesystem %1 cannot be resized.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="217"/> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="230"/> <source>The device %1 cannot be resized.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="238"/> <source>The filesystem %1 must be resized, but cannot.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/fsresizer/ResizeFSJob.cpp" line="239"/> <source>The device %1 must be resized, but cannot</source> <translation type="unfinished"/> </message> </context> <context> <name>ResizePartitionJob</name> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="48"/> <source>Resize partition %1.</source> <translation>Преоразмери дял %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="55"/> <source>Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="66"/> <source>Resizing %2MiB partition %1 to %3MiB.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/ResizePartitionJob.cpp" line="85"/> <source>The installer failed to resize partition %1 on disk '%2'.</source> <translation>Инсталатора не успя да преоразмери дял %1 върху диск '%2'.</translation> </message> </context> <context> <name>ResizeVolumeGroupDialog</name> <message> <location filename="../src/modules/partition/gui/ResizeVolumeGroupDialog.cpp" line="39"/> <source>Resize Volume Group</source> <translation type="unfinished"/> </message> </context> <context> <name>ResizeVolumeGroupJob</name> <message> <location filename="../src/modules/partition/jobs/ResizeVolumeGroupJob.cpp" line="37"/> <location filename="../src/modules/partition/jobs/ResizeVolumeGroupJob.cpp" line="55"/> <source>Resize volume group named %1 from %2 to %3.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/ResizeVolumeGroupJob.cpp" line="46"/> <source>Resize volume group named <strong>%1</strong> from <strong>%2</strong> to <strong>%3</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/ResizeVolumeGroupJob.cpp" line="70"/> <source>The installer failed to resize a volume group named '%1'.</source> <translation type="unfinished"/> </message> </context> <context> <name>ResultsListWidget</name> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="96"/> <source>This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="100"/> <source>This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a></source> <translation>Този компютър не отговаря на минималните изисквания за инсталиране %1.<br/>Инсталацията не може да продължи. <a href="#details">Детайли...</a></translation> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="118"/> <source>This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="122"/> <source>This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.</source> <translation>Този компютър не отговаря на някои от препоръчителните изисквания за инсталиране %1.<br/>Инсталацията може да продължи, но някои свойства могат да бъдат недостъпни.</translation> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="160"/> <source>This program will ask you some questions and set up %2 on your computer.</source> <translation>Тази програма ще ви зададе няколко въпроса и ще конфигурира %2 на вашия компютър.</translation> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="181"/> <source>For best results, please ensure that this computer:</source> <translation>За най-добри резултати, моля бъдете сигурни че този компютър:</translation> </message> <message> <location filename="../src/modules/welcome/checker/ResultsListWidget.cpp" line="209"/> <source>System requirements</source> <translation>Системни изисквания</translation> </message> </context> <context> <name>ScanningDialog</name> <message> <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="84"/> <source>Scanning storage devices...</source> <translation>Сканиране на устройствата за съхранение</translation> </message> <message> <location filename="../src/modules/partition/gui/ScanningDialog.cpp" line="85"/> <source>Partitioning</source> <translation>Разделяне</translation> </message> </context> <context> <name>SetHostNameJob</name> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="38"/> <source>Set hostname %1</source> <translation>Поставете име на хоста %1</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="45"/> <source>Set hostname <strong>%1</strong>.</source> <translation>Поставете име на хост <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="52"/> <source>Setting hostname %1.</source> <translation>Задаване името на хоста %1</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="62"/> <location filename="../src/modules/users/SetHostNameJob.cpp" line="69"/> <source>Internal Error</source> <translation>Вътрешна грешка</translation> </message> <message> <location filename="../src/modules/users/SetHostNameJob.cpp" line="76"/> <location filename="../src/modules/users/SetHostNameJob.cpp" line="87"/> <source>Cannot write hostname to target system</source> <translation>Не може да се запише името на хоста на целевата система</translation> </message> </context> <context> <name>SetKeyboardLayoutJob</name> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="59"/> <source>Set keyboard model to %1, layout to %2-%3</source> <translation>Постави модела на клавиатурата на %1, оформлението на %2-%3</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="321"/> <source>Failed to write keyboard configuration for the virtual console.</source> <translation>Неуспешно записването на клавиатурна конфигурация за виртуалната конзола.</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="322"/> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="326"/> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="332"/> <source>Failed to write to %1</source> <translation>Неуспешно записване върху %1</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="325"/> <source>Failed to write keyboard configuration for X11.</source> <translation>Неуспешно записване на клавиатурна конфигурация за X11.</translation> </message> <message> <location filename="../src/modules/keyboard/SetKeyboardLayoutJob.cpp" line="331"/> <source>Failed to write keyboard configuration to existing /etc/default directory.</source> <translation>Неуспешно записване на клавиатурна конфигурация в съществуващата директория /etc/default.</translation> </message> </context> <context> <name>SetPartFlagsJob</name> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="49"/> <source>Set flags on partition %1.</source> <translation>Задай флагове на дял %1.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="52"/> <source>Set flags on %1MiB %2 partition.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="56"/> <source>Set flags on new partition.</source> <translation>Задай флагове на нов дял.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="67"/> <source>Clear flags on partition <strong>%1</strong>.</source> <translation>Изчисти флаговете на дял <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="71"/> <source>Clear flags on %1MiB <strong>%2</strong> partition.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="85"/> <source>Flag %1MiB <strong>%2</strong> partition as <strong>%3</strong>.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="107"/> <source>Clearing flags on %1MiB <strong>%2</strong> partition.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="121"/> <source>Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="75"/> <source>Clear flags on new partition.</source> <translation>Изчисти флагове на нов дял.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="79"/> <source>Flag partition <strong>%1</strong> as <strong>%2</strong>.</source> <translation>Сложи флаг на дял <strong>%1</strong> като <strong>%2</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="91"/> <source>Flag new partition as <strong>%1</strong>.</source> <translation>Сложи флаг на новия дял като <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="103"/> <source>Clearing flags on partition <strong>%1</strong>.</source> <translation>Изчистване на флаговете на дял <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="111"/> <source>Clearing flags on new partition.</source> <translation>Изчистване на флаговете на новия дял.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="115"/> <source>Setting flags <strong>%2</strong> on partition <strong>%1</strong>.</source> <translation>Задаване на флагове <strong>%2</strong> на дял <strong>%1</strong>.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="127"/> <source>Setting flags <strong>%1</strong> on new partition.</source> <translation>Задаване на флагове <strong>%1</strong> на новия дял.</translation> </message> <message> <location filename="../src/modules/partition/jobs/SetPartitionFlagsJob.cpp" line="144"/> <source>The installer failed to set flags on partition %1.</source> <translation>Инсталатора не успя да зададе флагове на дял %1.</translation> </message> </context> <context> <name>SetPasswordJob</name> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="48"/> <source>Set password for user %1</source> <translation>Задай парола за потребител %1</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="55"/> <source>Setting password for user %1.</source> <translation>Задаване на парола за потребител %1</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="112"/> <source>Bad destination system path.</source> <translation>Лоша дестинация за системен път.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="113"/> <source>rootMountPoint is %1</source> <translation>rootMountPoint е %1</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="123"/> <source>Cannot disable root account.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="124"/> <source>passwd terminated with error code %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="139"/> <source>Cannot set password for user %1.</source> <translation>Не може да се постави парола за потребител %1.</translation> </message> <message> <location filename="../src/modules/users/SetPasswordJob.cpp" line="141"/> <source>usermod terminated with error code %1.</source> <translation>usermod е прекратен с грешка %1.</translation> </message> </context> <context> <name>SetTimezoneJob</name> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="43"/> <source>Set timezone to %1/%2</source> <translation>Постави часовата зона на %1/%2</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="71"/> <source>Cannot access selected timezone path.</source> <translation>Няма достъп до избрания път за часова зона.</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="72"/> <source>Bad path: %1</source> <translation>Невалиден път: %1</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="86"/> <source>Cannot set timezone.</source> <translation>Не може да се зададе часова зона.</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="87"/> <source>Link creation failed, target: %1; link name: %2</source> <translation>Неуспешно създаване на връзка: %1; име на връзка: %2</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="96"/> <source>Cannot set timezone,</source> <translation>Не може да се зададе часова зона,</translation> </message> <message> <location filename="../src/modules/locale/SetTimezoneJob.cpp" line="97"/> <source>Cannot open /etc/timezone for writing</source> <translation>Не може да се отвори /etc/timezone за записване</translation> </message> </context> <context> <name>ShellProcessJob</name> <message> <location filename="../src/modules/shellprocess/ShellProcessJob.cpp" line="50"/> <source>Shell Processes Job</source> <translation type="unfinished"/> </message> </context> <context> <name>SlideCounter</name> <message> <location filename="../src/qml/calamares/slideshow/SlideCounter.qml" line="36"/> <source>%L1 / %L2</source> <extracomment>slide counter, %1 of %2 (numeric)</extracomment> <translation>%L1 / %L2</translation> </message> </context> <context> <name>SummaryPage</name> <message> <location filename="../src/modules/summary/SummaryPage.cpp" line="57"/> <source>This is an overview of what will happen once you start the setup procedure.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/summary/SummaryPage.cpp" line="60"/> <source>This is an overview of what will happen once you start the install procedure.</source> <translation>Това е преглед на промените, които ще се извършат, след като започнете процедурата по инсталиране.</translation> </message> </context> <context> <name>SummaryViewStep</name> <message> <location filename="../src/modules/summary/SummaryViewStep.cpp" line="43"/> <source>Summary</source> <translation>Обобщение</translation> </message> </context> <context> <name>TrackingInstallJob</name> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="43"/> <source>Installation feedback</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="53"/> <source>Sending installation feedback.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="88"/> <source>Internal error in install-tracking.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="89"/> <source>HTTP request timed out.</source> <translation type="unfinished"/> </message> </context> <context> <name>TrackingMachineNeonJob</name> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="104"/> <source>Machine feedback</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="114"/> <source>Configuring machine feedback.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="133"/> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="136"/> <source>Error in machine feedback configuration.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="134"/> <source>Could not configure machine feedback correctly, script error %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingJobs.cpp" line="137"/> <source>Could not configure machine feedback correctly, Calamares error %1.</source> <translation type="unfinished"/> </message> </context> <context> <name>TrackingPage</name> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="24"/> <source>Placeholder</source> <translation>Заместител</translation> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="72"/> <source><html><head/><body><p>By selecting this, you will send <span style=" font-weight:600;">no information at all</span> about your installation.</p></body></html></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/page_trackingstep.ui" line="271"/> <source><html><head/><body><p><a href="placeholder"><span style=" text-decoration: underline; color:#2980b9;">Click here for more information about user feedback</span></a></p></body></html></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="44"/> <source>Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="45"/> <source>By selecting this you will send information about your installation and hardware. This information will <b>only be sent once</b> after the installation finishes.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="46"/> <source>By selecting this you will <b>periodically</b> send information about your installation, hardware and applications, to %1.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/tracking/TrackingPage.cpp" line="47"/> <source>By selecting this you will <b>regularly</b> send information about your installation, hardware, applications and usage patterns, to %1.</source> <translation type="unfinished"/> </message> </context> <context> <name>TrackingViewStep</name> <message> <location filename="../src/modules/tracking/TrackingViewStep.cpp" line="61"/> <source>Feedback</source> <translation>Обратна връзка</translation> </message> </context> <context> <name>UsersPage</name> <message> <location filename="../src/modules/users/UsersPage.cpp" line="120"/> <source><small>If more than one person will use this computer, you can create multiple accounts after setup.</small></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="126"/> <source><small>If more than one person will use this computer, you can create multiple accounts after installation.</small></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="317"/> <source>Your username is too long.</source> <translation>Вашето потребителско име е твърде дълго.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="323"/> <source>Your username contains invalid characters. Only lowercase letters and numbers are allowed.</source> <translation>Потребителското ви име съдържа непозволени символи! Само малки букви и числа са позволени.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="361"/> <source>Your hostname is too short.</source> <translation>Вашето име на хоста е твърде кратко.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="367"/> <source>Your hostname is too long.</source> <translation>Вашето име на хоста е твърде дълго.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="373"/> <source>Your hostname contains invalid characters. Only letters, numbers and dashes are allowed.</source> <translation>Вашето име на хоста съдържа непозволени символи! Само букви, цифри и тирета са позволени.</translation> </message> <message> <location filename="../src/modules/users/UsersPage.cpp" line="401"/> <location filename="../src/modules/users/UsersPage.cpp" line="445"/> <source>Your passwords do not match!</source> <translation>Паролите Ви не съвпадат!</translation> </message> </context> <context> <name>UsersViewStep</name> <message> <location filename="../src/modules/users/UsersViewStep.cpp" line="54"/> <source>Users</source> <translation>Потребители</translation> </message> </context> <context> <name>VolumeGroupBaseDialog</name> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="14"/> <source>Create Volume Group</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="20"/> <source>List of Physical Volumes</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="30"/> <source>Volume Group Name:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="43"/> <source>Volume Group Type:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="56"/> <source>Physical Extent Size:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="66"/> <source> MiB</source> <translation>MiB</translation> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="82"/> <source>Total Size:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="102"/> <source>Used Size:</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="122"/> <source>Total Sectors:</source> <translation>Общо сектори:</translation> </message> <message> <location filename="../src/modules/partition/gui/VolumeGroupBaseDialog.ui" line="142"/> <source>Quantity of LVs:</source> <translation type="unfinished"/> </message> </context> <context> <name>WelcomePage</name> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="14"/> <source>Form</source> <translation>Форма</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="160"/> <source>&Release notes</source> <translation>&Бележки по изданието</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="150"/> <source>&Known issues</source> <translation>&Съществуващи проблеми</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="17"/> <location filename="../src/modules/welcome/WelcomePage.ui" line="72"/> <source>Select language</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="140"/> <source>&Support</source> <translation>&Поддръжка</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.ui" line="130"/> <source>&About</source> <translation>&Относно</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="76"/> <source><h1>Welcome to the %1 installer.</h1></source> <translation><h1>Добре дошли при инсталатора на %1.</h1></translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="75"/> <source><h1>Welcome to the Calamares installer for %1.</h1></source> <translation><h1>Добре дошли при инсталатора Calamares на %1.</h1></translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="71"/> <source><h1>Welcome to the Calamares setup program for %1.</h1></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="72"/> <source><h1>Welcome to %1 setup.</h1></source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="90"/> <source>About %1 setup</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="91"/> <source>About %1 installer</source> <translation>Относно инсталатор %1</translation> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="94"/> <source><h1>%1</h1><br/><strong>%2<br/>for %3</strong><br/><br/>Copyright 2014-2017 Teo Mrnjavac &lt;teo@kde.org&gt;<br/>Copyright 2017-2019 Adriaan de Groot &lt;groot@kde.org&gt;<br/>Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.</source> <translation type="unfinished"/> </message> <message> <location filename="../src/modules/welcome/WelcomePage.cpp" line="201"/> <source>%1 support</source> <translation>%1 поддръжка</translation> </message> </context> <context> <name>WelcomeViewStep</name> <message> <location filename="../src/modules/welcome/WelcomeViewStep.cpp" line="55"/> <source>Welcome</source> <translation>Добре дошли</translation> </message> </context> </TS>