BootInfoWidget The boot environment of this system. Older x86 systems only support BIOS. Modern systems usually use EFI, but may also show up as BIOS if started in compatibility mode. This system was started with an EFI boot environment. To configure startup from an EFI environment, this installer must deploy a boot loader application, like GRUB or systemd-boot on an EFI System Partition. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. This system was started with a BIOS boot environment. To configure startup from a BIOS environment, this installer must install a boot loader, like GRUB, either at the beginning of a partition or on the Master Boot Record near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. BootLoaderModel Master Boot Record of %1 %1 च्या मुख्य आरंभ अभिलेखामधे Boot Partition आरंभक विभाजन System Partition प्रणाली विभाजन Do not install a boot loader आरंभ सूचक अधिष्ठापित करु नका %1 (%2) %1 (%2) Calamares::DebugWindow Form स्वरुप GlobalStorage JobQueue Modules मोडयुल्स Type: प्रकार : none कोणतेही नाहीत Interface: अंतराफलक : Tools साधने Debug information दोषमार्जन माहिती Calamares::ExecutionViewStep Install अधिष्ठापना Calamares::JobThread Done पूर्ण झाली Calamares::ProcessJob Run command %1 %2 %1 %2 आज्ञा चालवा Running command %1 %2 %1 %2 आज्ञा चालवला जातोय External command crashed Command %1 crashed. Output: %2 External command failed to start बाह्य आज्ञा सुरु करण्यात अपयश Command %1 failed to start. %1 आज्ञा सुरु करण्यात अपयश Internal error when starting command आज्ञा सुरु करताना अंतर्गत त्रुटी Bad parameters for process job call. External command failed to finish बाह्य आज्ञा पूर्ण करताना अपयश Command %1 failed to finish in %2s. Output: %3 %1 ही आज्ञा %2s मधे पूर्ण करताना अपयश. आउटपुट : %3 External command finished with errors बाह्य आज्ञा त्रुट्यांसहित पूर्ण झाली Command %1 finished with exit code %2. Output: %3 %1 ही आज्ञा %2 या निर्गम कोडसहित पूर्ण झाली. आउटपुट : %3 Calamares::PythonJob Running %1 operation. %1 क्रिया चालवला जातोय Bad working directory path Working directory %1 for python job %2 is not readable. Bad main script file Main script file %1 for python job %2 is not readable. Boost.Python error in job "%1". Calamares::ViewManager &Back &मागे &Next &पुढे &Cancel &रद्द करा Cancel installation without changing the system. प्रणालीत बदल न करता अधिष्टापना रद्द करा. Cancel installation? अधिष्ठापना रद्द करायचे? Do you really want to cancel the current install process? The installer will quit and all changes will be lost. &Yes &होय &No &नाही &Close &बंद करा Continue with setup? The %1 installer is about to make changes to your disk in order to install %2. You will not be able to undo these changes. &Install now &आता अधिष्ठापित करा Go &back &मागे जा &Done &पूर्ण झाली The installation is complete. Close the installer. अधिष्ठापना संपूर्ण झाली. अधिष्ठापक बंद करा. Error त्रुटी Installation Failed अधिष्ठापना अयशस्वी झाली CalamaresPython::Helper Unknown exception type unparseable Python error unparseable Python traceback Unfetchable Python error. CalamaresWindow %1 Installer %1 अधिष्ठापक Show debug information दोषमार्जन माहिती दर्शवा CheckerWidget This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. <a href="#details">Details...</a> This computer does not satisfy some of the recommended requirements for installing %1. Installation can continue, but some features might be disabled. This program will ask you some questions and set up %2 on your computer. For best results, please ensure that this computer: System requirements प्रणालीची आवशक्यता ChoicePage Form स्वरुप After: नंतर : Manual partitioning You can create or resize partitions yourself. Boot loader location: %1 will be shrunk to %2MB and a new %3MB partition will be created for %4. Select storage de&vice: Current: सद्या : Reuse %1 as home partition for %2. Select a partition to shrink, then drag the bottom bar to resize Select a partition to install on An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. The EFI system partition at %1 will be used for starting %2. EFI system partition: This storage device does not seem to have an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. Erase disk This will delete all data currently present on the selected storage device. This storage device has %1 on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. Install alongside The installer will shrink a partition to make room for %1. Replace a partition Replaces a partition with %1. This storage device already has an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. This storage device has multiple operating systems on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. ClearMountsJob Clear mounts for partitioning operations on %1 Clearing mounts for partitioning operations on %1. Cleared all mounts for %1 ClearTempMountsJob Clear all temporary mounts. Clearing all temporary mounts. Cannot get list of temporary mounts. Cleared all temporary mounts. CreatePartitionDialog Create a Partition विभाजन निर्माण करा MiB Partition &Type: विभाजन &प्रकार : &Primary &प्राथमिक E&xtended Fi&le System: Flags: &Mount Point: Si&ze: En&crypt Logical तार्किक Primary प्राथमिक GPT Mountpoint already in use. Please select another one. CreatePartitionJob Create new %2MB partition on %4 (%3) with file system %1. Create new %2MB partition on %4 (%3) with file system %1. Creating new %1 partition on %2. %2 वर %1 हे नवीन विभाजन निर्माण करत आहे The installer failed to create partition on disk '%1'. Could not open device '%1'. Could not open partition table. The installer failed to create file system on partition %1. The installer failed to update partition table on disk '%1'. CreatePartitionTableDialog Create Partition Table विभाजन कोष्टक निर्माण करा Creating a new partition table will delete all existing data on the disk. What kind of partition table do you want to create? Master Boot Record (MBR) GUID Partition Table (GPT) CreatePartitionTableJob Create new %1 partition table on %2. Create new %1 partition table on %2 (%3). Creating new %1 partition table on %2. The installer failed to create a partition table on %1. Could not open device %1. CreateUserJob Create user %1 Create user %1. Creating user %1. Sudoers dir is not writable. Cannot create sudoers file for writing. Cannot chmod sudoers file. Cannot open groups file for reading. Cannot create user %1. useradd terminated with error code %1. Cannot add user %1 to groups: %2. usermod terminated with error code %1. %1 या एरर कोडसहित usermod रद्द केले. Cannot set home directory ownership for user %1. chown terminated with error code %1. DeletePartitionJob Delete partition %1. Delete partition %1. Deleting partition %1. The installer failed to delete partition %1. Partition (%1) and device (%2) do not match. Could not open device %1. Could not open partition table. DeviceInfoWidget The type of partition table on the selected storage device. The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device. This installer will keep the current partition table unless you explicitly choose otherwise. If unsure, on modern systems GPT is preferred. This device has a %1 partition table. This is a loop device. It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. This installer cannot detect a partition table on the selected storage device. The device either has no partition table, or the partition table is corrupted or of an unknown type. This installer can create a new partition table for you, either automatically, or through the manual partitioning page. This is the recommended partition table type for modern systems which start from an EFI boot environment. This partition table type is only advisable on older systems which start from a BIOS boot environment. GPT is recommended in most other cases. Warning: the MBR partition table is an obsolete MS-DOS era standard. Only 4 primary partitions may be created, and of those 4, one can be an extended partition, which may in turn contain many logical partitions. DeviceModel %1 - %2 (%3) DracutLuksCfgJob Write LUKS configuration for Dracut to %1 Skip writing LUKS configuration for Dracut: "/" partition is not encrypted Failed to open %1 DummyCppJob Dummy C++ Job EditExistingPartitionDialog Edit Existing Partition Content: &Keep Format Warning: Formatting the partition will erase all existing data. &Mount Point: Si&ze: MiB Fi&le System: Flags: Mountpoint already in use. Please select another one. EncryptWidget Form स्वरुप En&crypt system Passphrase Confirm passphrase Please enter the same passphrase in both boxes. FillGlobalStorageJob Set partition information Install %1 on new %2 system partition. Set up new %2 partition with mount point %1. Install %2 on %3 system partition %1. Set up %3 partition %1 with mount point %2. Install boot loader on %1. Setting up mount points. FinishedPage Form स्वरुप &Restart now <h1>All done.</h1> %1 has been installed on your computer. You may now restart into your new system, or continue using the %2 Live environment. <h1>Installation Failed</h1> %1 has not been installed on your computer. The error message was: %2. FinishedViewStep Finish Installation Complete The installation of %1 is complete. FormatPartitionJob Format partition %1 (file system: %2, size: %3 MB) on %4. Format %3MB partition %1 with file system %2. Formatting partition %1 with file system %2. The installer failed to format partition %1 on disk '%2'. Could not open device '%1'. Could not open partition table. The installer failed to create file system on partition %1. The installer failed to update partition table on disk '%1'. InteractiveTerminalPage Konsole not installed Please install the kde konsole and try again! Executing script:  <code>%1</code> InteractiveTerminalViewStep Script KeyboardPage Set keyboard model to %1. Set keyboard layout to %1/%2. KeyboardViewStep Keyboard LCLocaleDialog System locale setting The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. &Cancel &रद्द करा &OK LicensePage Form स्वरुप I accept the terms and conditions above. <h1>License Agreement</h1>This setup procedure will install proprietary software that is subject to licensing terms. Please review the End User License Agreements (EULAs) above. If you do not agree with the terms, the setup procedure cannot continue. <h1>License Agreement</h1>This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. Please review the End User License Agreements (EULAs) above. If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. %1 driver by %2 %1 is an untranslatable product name, example: Creative Audigy driver %1 graphics driver by %2 %1 is usually a vendor name, example: Nvidia graphics driver %1 browser plugin by %2 %1 codec by %2 %1 package by %2 %1 by %2 <a href="%1">view license agreement</a> LicenseViewStep License LocalePage The system language will be set to %1. The numbers and dates locale will be set to %1. Region: Zone: &Change... Set timezone to %1/%2. %1 (%2) Language (Country) %1 (%2) LocaleViewStep Loading location data... Location NetInstallPage Name Description Network Installation. (Disabled: Unable to fetch package lists, check your network connection) Network Installation. (Disabled: Received invalid groups data) NetInstallViewStep Package selection Page_Keyboard Form स्वरुप Keyboard Model: Type here to test your keyboard Page_UserSetup Form स्वरुप What is your name? What name do you want to use to log in? font-weight: normal If more than one person will use this computer, you can set up multiple accounts after installation. Choose a password to keep your account safe. Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. What is the name of this computer? This name will be used if you make the computer visible to others on a network. Log in automatically without asking for the password. Use the same password for the administrator account. Choose a password for the administrator account. Enter the same password twice, so that it can be checked for typing errors. PartitionLabelsView Root Home Boot EFI system Swap New partition for %1 New partition %1 %2 PartitionModel Free Space New partition Name File System Mount Point Size PartitionPage Form स्वरुप Storage de&vice: &Revert All Changes New Partition &Table &Create &Edit &Delete Install boot &loader on: Are you sure you want to create a new partition table on %1? PartitionViewStep Gathering system information... Partitions Install %1 alongside another operating system. Erase disk and install %1. Replace a partition with %1. Manual partitioning. Install %1 alongside another operating system on disk %2 (%3). Erase disk %2 (%3) and install %1. Replace a partition on disk %2 (%3) with %1. Manual partitioning on disk %1 (%2). Disk %1 (%2) Current: सद्या : After: नंतर : No EFI system partition configured An EFI system partition is necessary to start %1. To configure an EFI system partition, go back and select or create a FAT32 filesystem with the esp flag enabled and mount point %2. You can continue without setting up an EFI system partition but your system may fail to start. EFI system partition flag not set An EFI system partition is necessary to start %1. A partition was configured with mount point %2 but its esp flag is not set. To set the flag, go back and edit the partition. You can continue without setting the flag but your system may fail to start. Boot partition not encrypted A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted. There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition. You may continue if you wish, but filesystem unlocking will happen later during system startup. To encrypt the boot partition, go back and recreate it, selecting Encrypt in the partition creation window. QObject Default Keyboard Model Default unknown extended unformatted swap Unpartitioned space or unknown partition table ReplaceWidget Form स्वरुप Select where to install %1. Warning: this will delete all files on the selected partition. The selected item does not appear to be a valid partition. %1 cannot be installed on empty space. Please select an existing partition. %1 cannot be installed on an extended partition. Please select an existing primary or logical partition. %1 cannot be installed on this partition. Data partition (%1) Unknown system partition (%1) %1 system partition (%2) %4 The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB. %2 An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. %3 %1 will be installed on %2. Warning: all data on partition %2 will be lost. The EFI system partition at %1 will be used for starting %2. EFI system partition: RequirementsChecker Gathering system information... has at least %1 GB available drive space There is not enough drive space. At least %1 GB is required. has at least %1 GB working memory The system does not have enough working memory. At least %1 GB is required. is plugged in to a power source The system is not plugged in to a power source. is connected to the Internet The system is not connected to the Internet. The installer is not running with administrator rights. The screen is too small to display the installer. ResizePartitionJob Resize partition %1. Resize %2MB partition %1 to %3MB. Resizing %2MB partition %1 to %3MB. The installer failed to resize partition %1 on disk '%2'. ScanningDialog Scanning storage devices... Partitioning SetHostNameJob Set hostname %1 Set hostname %1. Setting hostname %1. Internal Error अंतर्गत त्रूटी Cannot write hostname to target system SetKeyboardLayoutJob Set keyboard model to %1, layout to %2-%3 Failed to write keyboard configuration for the virtual console. Failed to write to %1 Failed to write keyboard configuration for X11. Failed to write keyboard configuration to existing /etc/default directory. SetPartFlagsJob Set flags on partition %1. Set flags on %1MB %2 partition. Set flags on new partition. Clear flags on partition %1. Clear flags on %1MB %2 partition. Clear flags on new partition. Flag partition %1 as %2. Flag %1MB %2 partition as %3. Flag new partition as %1. Clearing flags on partition %1. Clearing flags on %1MB %2 partition. Clearing flags on new partition. Setting flags %2 on partition %1. Setting flags %3 on %1MB %2 partition. Setting flags %1 on new partition. The installer failed to set flags on partition %1. Could not open device '%1'. Could not open partition table on device '%1'. Could not find partition '%1'. SetPasswordJob Set password for user %1 Setting password for user %1. Bad destination system path. rootMountPoint is %1 Cannot disable root account. passwd terminated with error code %1. Cannot set password for user %1. usermod terminated with error code %1. %1 या एरर कोडसहित usermod रद्द केले. SetTimezoneJob Set timezone to %1/%2 %1/%2 हा वेळक्षेत्र निश्चित करा Cannot access selected timezone path. निवडलेल्या वेळक्षेत्राचा पाथ घेऊ शकत नाही. Bad path: %1 खराब पाथ : %1 Cannot set timezone. वेळक्षेत्र निश्चित करु शकत नाही Link creation failed, target: %1; link name: %2 दुवा निर्माण करताना अपयश, टार्गेट %1; दुवा नाव : %2 Cannot set timezone, वेळक्षेत्र निश्चित करु शकत नाही, Cannot open /etc/timezone for writing /etc/timezone लिहिण्याकरिता उघडू शकत नाही SummaryPage This is an overview of what will happen once you start the install procedure. SummaryViewStep Summary सारांश UsersPage Your username is too long. तुमचा वापरकर्तानाव खूप लांब आहे Your username contains invalid characters. Only lowercase letters and numbers are allowed. तुमच्या वापरकर्तानावात अवैध अक्षरे आहेत. फक्त अक्षरे, अंक आणि डॅश स्वीकारले जातील. Your hostname is too short. तुमचा संगणकनाव खूप लहान आहे Your hostname is too long. तुमचा संगणकनाव खूप लांब आहे Your hostname contains invalid characters. Only letters, numbers and dashes are allowed. तुमच्या संगणकनावात अवैध अक्षरे आहेत. फक्त अक्षरे, अंक आणि डॅश स्वीकारले जातील. Your passwords do not match! तुमचा परवलीशब्द जुळत नाही Password is too short परवलीशब्द खूप लहान आहे Password is too long परवलीशब्द खूप लांब आहे UsersViewStep Users वापरकर्ते WelcomePage Form स्वरुप &Language: &भाषा : &Release notes &प्रकाशन टिपा &Known issues &ज्ञात त्रुटी &Support %1 पाठबळ &About &विषयी <h1>Welcome to the %1 installer.</h1> <h1>‌%1 अधिष्ठापकमधे स्वागत आहे.</h1> <h1>Welcome to the Calamares installer for %1.</h1> <h1>‌%1 साठी असलेल्या अधिष्ठापकमध्ये स्वागत आहे.</h1> About %1 installer %1 अधिष्ठापक बद्दल <h1>%1</h1> %2 for %3 Copyright 2014-2017 Teo Mrnjavac <teo@kde.org> Copyright 2017 Adriaan de Groot <groot@kde.org> Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Lisa Vitolo, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>. <a href="http://calamares.io/">Calamares</a> development is sponsored by <a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software. %1 support %1 पाठबळ WelcomeViewStep Welcome स्वागत