AboutData <h1>%1</h1> %2 for %3 Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://app.transifex.com/calamares/calamares/">Calamares translators team</a>. Copyright %1-%2 %3 <%4> Copyright year-year Name <email-address> ActiveDirectoryJob Enroll system in Active Directory @label Enrolling system in Active Directory… @status AutoMountManagementJob Managing auto-mount settings… @status BootInfoWidget The boot environment of this system. Older x86 systems only support BIOS. Modern systems usually use EFI, but may also show up as BIOS if started in compatibility mode. This system was started with an EFI boot environment. To configure startup from an EFI environment, this installer must deploy a boot loader application, like GRUB or systemd-boot on an EFI System Partition. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. This system was started with a BIOS boot environment. To configure startup from a BIOS environment, this installer must install a boot loader, like GRUB, either at the beginning of a partition or on the Master Boot Record near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. BootLoaderModel Master Boot Record of %1 @info Master Boot Record ของ %1 Boot Partition @info พาร์ทิชันบูต System Partition @info พาร์ทิชันระบบ Do not install a boot loader @label ไม่ต้องติดตั้งบูตโหลดเดอร์ %1 (%2) %1 (%2) Calamares::BlankViewStep Blank Page หน้าว่าง Calamares::DebugWindow GlobalStorage GlobalStorage JobQueue JobQueue Modules Modules Type: ประเภท: none ไม่มี Interface: Crashes Calamares, so that Dr. Konqi can look at it. Reloads the stylesheet from the branding directory. Reload Stylesheet Displays the tree of widget names in the log (for stylesheet debugging). Widget Tree Uploads the session log to the configured pastebin. Send Session Log Debug Information @title Calamares::ExecutionViewStep %p% Progress percentage indicator: %p is where the number 0..100 is placed Set Up @label Install @label ติดตั้ง Calamares::FailJob Job failed (%1) Programmed job failure was explicitly requested. Calamares::JobThread Done เสร็จสิ้น Calamares::NamedJob Example job (%1) Calamares::ProcessJob Running command %1 in target system… @status Running command %1… @status Calamares::Python::Job Running %1 operation. การปฏิบัติการ %1 กำลังทำงาน Bad working directory path เส้นทางไดเรคทอรีที่ใช้ทำงานไม่ถูกต้อง Working directory %1 for python job %2 is not readable. ไม่สามารถอ่านไดเรคทอรีที่ใช้ทำงาน %1 สำหรับ python %2 ได้ Bad main script file ไฟล์สคริปต์หลักไม่ถูกต้อง Main script file %1 for python job %2 is not readable. ไม่สามารถอ่านไฟล์สคริปต์หลัก %1 สำหรับ python %2 ได้ Bad internal script Internal script for python job %1 raised an exception. Main script file %1 for python job %2 could not be loaded because it raised an exception. Main script file %1 for python job %2 raised an exception. Main script file %1 for python job %2 returned invalid results. Main script file %1 for python job %2 does not contain a run() function. Calamares::PythonJob Running %1 operation… @status Bad working directory path @error เส้นทางไดเรคทอรีที่ใช้ทำงานไม่ถูกต้อง Working directory %1 for python job %2 is not readable. @error ไม่สามารถอ่านไดเรคทอรีที่ใช้ทำงาน %1 สำหรับ python %2 ได้ Bad main script file @error ไฟล์สคริปต์หลักไม่ถูกต้อง Main script file %1 for python job %2 is not readable. @error ไม่สามารถอ่านไฟล์สคริปต์หลัก %1 สำหรับ python %2 ได้ Boost.Python error in job "%1" @error Calamares::QmlViewStep Loading… @status QML step %1. @label Loading failed. @info Calamares::RequirementsChecker Requirements checking for module '%1' is complete. @info Waiting for %n module(s)… @status (%n second(s)) @status (%n วินาที) System-requirements checking is complete. @info Calamares::ViewManager The upload was unsuccessful. No web-paste was done. Install log posted to %1 Link copied to clipboard Install Log Paste URL &Yes &ใช่ &No &ไม่ &Close ปิ&ด Setup Failed @title การตั้งค่าล้มเหลว Installation Failed @title การติดตั้งล้มเหลว Error @title ข้อผิดพลาด Calamares Initialization Failed @title %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution. @info The following modules could not be loaded: @info Continue with Setup? @title Continue with Installation? @title The %1 setup program is about to make changes to your disk in order to set up %2. You will not be able to undo these changes. %1 is short product name, %2 is short product name with version The %1 installer is about to make changes to your disk in order to install %2. You will not be able to undo these changes. %1 is short product name, %2 is short product name with version ตัวติดตั้ง %1 กำลังพยายามที่จะทำการเปลี่ยนแปลงในดิสก์ของคุณเพื่อติดตั้ง %2 คุณจะไม่สามารถยกเลิกการเปลี่ยนแปลงเหล่านี้ได้ &Set Up Now @button &Install Now @button Go &Back @button &Set Up @button &Install @button ติ&ดตั้ง Setup is complete. Close the setup program. @tooltip The installation is complete. Close the installer. @tooltip Cancel the setup process without changing the system. @tooltip Cancel the installation process without changing the system. @tooltip &Next @button &N ถัดไป &Back @button &B ย้อนกลับ &Done @button &Cancel @button &C ยกเลิก Cancel Setup? @title Cancel Installation? @title Do you really want to cancel the current setup process? The setup program will quit and all changes will be lost. Do you really want to cancel the current install process? The installer will quit and all changes will be lost. คุณต้องการยกเลิกกระบวนการติดตั้งที่กำลังดำเนินการอยู่หรือไม่? ตัวติดตั้งจะสิ้นสุดการทำงานและไม่บันทึกการเปลี่ยนแปลงที่ได้ดำเนินการก่อนหน้านี้ CalamaresPython::Helper Unknown exception type @error ข้อผิดพลาดไม่ทราบประเภท Unparseable Python error @error Unparseable Python traceback @error Unfetchable Python error @error CalamaresWindow %1 Setup Program %1 Installer ตัวติดตั้ง %1 ChangeFilesystemLabelJob Set filesystem label on %1 @title Set filesystem label %1 to partition %2 @info Setting filesystem label %1 to partition %2… @status The installer failed to update partition table on disk '%1'. @info ตัวติดตั้งไม่สามารถอัพเดทตารางพาร์ทิชันบนดิสก์ '%1' CheckerContainer Gathering system information... กำลังรวบรวมข้อมูลของระบบ... ChoicePage Select storage de&vice: @label เลือกอุปก&รณ์จัดเก็บ: Current: @label ปัจจุบัน: After: @label หลัง: Reuse %1 as home partition for %2 @label Select a partition to shrink, then drag the bottom bar to resize เลือกพาร์ทิชันที่จะลดขนาด แล้วลากแถบด้านล่างเพื่อปรับขนาด %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4. @info, %1 is partition name, %4 is product name Select a partition to install on @label เลือกพาร์ทิชันที่จะติดตั้ง An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. @info, %1 is product name ไม่พบพาร์ทิชันสำหรับระบบ EFI อยู่ที่ไหนเลยในระบบนี้ กรุณากลับไปเลือกใช้การแบ่งพาร์ทิชันด้วยตนเอง เพื่อติดตั้ง %1 The EFI system partition at %1 will be used for starting %2. @info, %1 is partition path, %2 is product name พาร์ทิชันสำหรับระบบ EFI ที่ %1 จะถูกใช้เพื่อเริ่มต้น %2 EFI system partition: @label พาร์ทิชันสำหรับระบบ EFI: This storage device does not seem to have an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. ดูเหมือนว่าอุปกรณ์จัดเก็บข้อมูลนี้ไม่มีระบบปฏิบัติการ คุณต้องการทำอย่างไร? คุณจะสามารถทบทวนและยืนยันตัวเลือกของคุณก่อนที่จะกระทำการเปลี่ยนแปลงไปยังอุปกรณ์จัดเก็บข้อมูลของคุณ Erase disk This will delete all data currently present on the selected storage device. ล้างดิสก์ การกระทำนี้จะลบข้อมูลทั้งหมดที่อยู่บนอุปกรณ์จัดเก็บข้อมูลที่เลือก Install alongside The installer will shrink a partition to make room for %1. ติดตั้งควบคู่กับระบบปฏิบัติการเดิม ตัวติดตั้งจะลดเนื้อที่พาร์ทิชันเพื่อให้มีเนื้อที่สำหรับ %1 Replace a partition Replaces a partition with %1. แทนที่พาร์ทิชัน แทนที่พาร์ทิชันด้วย %1 This storage device has %1 on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. อุปกรณ์จัดเก็บข้อมูลนี้มีระบบปฏิบัติการ %1 อยู่ คุณต้องการทำอย่างไร? คุณจะสามารถทบทวนและยืนยันตัวเลือกของคุณก่อนที่จะกระทำการเปลี่ยนแปลงไปยังอุปกรณ์จัดเก็บข้อมูลของคุณ This storage device already has an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. อุปกรณ์จัดเก็บข้อมูลนี้มีระบบปฏิบัติการอยู่แล้ว คุณต้องการทำอย่างไร? คุณจะสามารถทบทวนและยืนยันตัวเลือกของคุณก่อนที่จะกระทำการเปลี่ยนแปลงไปยังอุปกรณ์จัดเก็บข้อมูลของคุณ This storage device has multiple operating systems on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. อุปกรณ์จัดเก็บข้อมูลนี้มีหลายระบบปฏิบัติการ คุณต้องการทำอย่างไร? คุณจะสามารถทบทวนและยืนยันตัวเลือกของคุณก่อนที่จะกระทำการเปลี่ยนแปลงไปยังอุปกรณ์จัดเก็บข้อมูลของคุณ This storage device already has an operating system on it, but the partition table %1 is different from the needed %2. This storage device has one of its partitions mounted. @info This storage device is a part of an inactive RAID device. @info No swap @label Reuse swap @label Swap (no Hibernate) @label Swap (with Hibernate) @label Swap to file @label Manual partitioning You can create or resize partitions yourself. กำหนดพาร์ทิชันด้วยตนเอง คุณสามารถสร้างหรือเปลี่ยนขนาดของพาร์ทิชันได้ด้วยตนเอง Bootloader location: @label ClearMountsJob Successfully unmounted %1. Successfully disabled swap %1. Successfully cleared swap %1. Successfully closed mapper device %1. Successfully disabled volume group %1. Clear mounts for partitioning operations on %1 @title ล้างจุดเชื่อมต่อสำหรับการแบ่งพาร์ทิชันบน %1 Clearing mounts for partitioning operations on %1… @status Cleared all mounts for %1 ล้างจุดเชื่อมต่อทั้งหมดแล้วสำหรับ %1 ClearTempMountsJob Clearing all temporary mounts… @status Cleared all temporary mounts. จุดเชื่อมต่อชั่วคราวทั้งหมดถูกล้างแล้ว CommandList Could not run command. The commands use variables that are not defined. Missing variables are: %1. Config Setup Failed @title การตั้งค่าล้มเหลว Installation Failed @title การติดตั้งล้มเหลว The setup of %1 did not complete successfully. @info The installation of %1 did not complete successfully. @info Setup Complete @title Installation Complete @title การติดตั้งเสร็จสิ้น The setup of %1 is complete. @info The installation of %1 is complete. @info การติดตั้ง %1 เสร็จสิ้น Keyboard model has been set to %1 . @label, %1 is keyboard model, as in Apple Magic Keyboard Keyboard layout has been set to %1/%2. @label, %1 is layout, %2 is layout variant Set timezone to %1/%2 @action ตั้งโซนเวลาเป็น %1/%2 The system language will be set to %1. @info ภาษาของระบบจะถูกตั้งค่าเป็น %1 The numbers and dates locale will be set to %1. @info ตำแหน่งที่ตั้งสำหรับหมายเลขและวันที่จะถูกตั้งค่าเป็น %1 Network Installation. (Disabled: Incorrect configuration) Network Installation. (Disabled: Received invalid groups data) Network Installation. (Disabled: Internal error) Network Installation. (Disabled: Unable to fetch package lists, check your network connection) Network Installation. (Disabled: No package list) Package selection เลือกแพ็กเกจ Package Selection เลือกแพ็กเกจ Please pick a product from the list. The selected product will be installed. เลือกผลิตภัณฑ์จากรายการ ผลิตภัณฑ์ที่เลือกไว้จะถูกติดตั้ง Packages แพ็กเกจ Install option: %1 None Summary @label สาระสำคัญ This is an overview of what will happen once you start the setup procedure. This is an overview of what will happen once you start the install procedure. Your username is too long. ชื่อผู้ใช้ของคุณยาวเกินไป Your username must start with a lowercase letter or underscore. Only lowercase letters, numbers, underscore and hyphen are allowed. '%1' is not allowed as username. ไม่อนุญาตให้ใช้ '%1' เป็นชื่อผู้ใช้ Your hostname is too short. ชื่อโฮสต์ของคุณสั้นเกินไป Your hostname is too long. ชื่อโฮสต์ของคุณยาวเกินไป '%1' is not allowed as hostname. Only letters, numbers, underscore and hyphen are allowed. Your passwords do not match! รหัสผ่านของคุณไม่ตรงกัน! OK! ตกลง! This computer does not satisfy the minimum requirements for setting up %1. Setup cannot continue. This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. This computer does not satisfy some of the recommended requirements for installing %1. Installation can continue, but some features might be disabled. คอมพิวเตอร์มีความต้องการไม่เพียงพอที่จะติดตั้ง %1 สามารถทำการติดตั้งต่อไปได้ แต่ฟีเจอร์บางอย่างจะถูกปิดไว้ This program will ask you some questions and set up %2 on your computer. โปรแกรมนี้จะถามคำถามต่าง ๆ เพื่อติดตั้ง %2 ลงในคอมพิวเตอร์ของคุณ <h1>Welcome to the Calamares setup program for %1</h1> <h1>Welcome to %1 setup</h1> <h1>ยินดีต้อนรับสู่ตัวตั้งค่า %1</h1> <h1>Welcome to the Calamares installer for %1</h1> <h1>ยินดีต้อนรับสู่ตัวติดตั้ง Calamares สำหรับ %1</h1> <h1>Welcome to the %1 installer</h1> <h1>ยินดีต้อนรับสู่ตัวติดตั้ง %1</h1> ContextualProcessJob Performing contextual processes' job… @status CreatePartitionDialog Create a Partition สร้างพาร์ทิชัน Si&ze: &Z ขนาด: MiB Partition &Type: &T พาร์ทิชันและประเภท: Primar&y E&xtended &X ขยาย Fi&le System: LVM LV name &Mount Point: &M จุดเชื่อมต่อ: Flags: Flags: Label for the filesystem FS Label: En&crypt @action Logical @label โลจิคอล Primary @label หลัก GPT @label GPT Mountpoint already in use. Please select another one. @info Mountpoint must start with a <tt>/</tt>. @info CreatePartitionJob Create new %1MiB partition on %3 (%2) with entries %4 @title Create new %1MiB partition on %3 (%2) @title Create new %2MiB partition on %4 (%3) with file system %1 @title Create new %1MiB partition on %3 (%2) with entries %4 @info Create new %1MiB partition on %3 (%2) @info Create new %2MiB partition on %4 (%3) with file system %1 @info Creating new %1 partition on %2… @status The installer failed to create partition on disk '%1'. @info ตัวติดตั้งไม่สามารถสร้างพาร์ทิชันบนดิสก์ '%1' CreatePartitionTableDialog Create Partition Table สร้างตารางพาร์ทิชัน Creating a new partition table will delete all existing data on the disk. การสร้างตารางพาร์ทิชันใหม่จะลบข้อมูลทั้งหมดบนดิสก์ What kind of partition table do you want to create? คุณต้องการสร้างตารางพาร์ทิชันชนิดใด? Master Boot Record (MBR) Master Boot Record (MBR) GUID Partition Table (GPT) GUID Partition Table (GPT) CreatePartitionTableJob Creating new %1 partition table on %2… @status Creating new %1 partition table on %2 (%3)… @status The installer failed to create a partition table on %1. ตัวติดตั้งไม่สามารถสร้างตารางพาร์ทิชันบน %1 CreateUserJob Create user %1 สร้างผู้ใช้ %1 Create user %1 Creating user %1… @status Preserving home directory… @status Configuring user %1 @status กำลังกำหนดค่าผู้ใช้ %1 Setting file permissions… @status CreateVolumeGroupDialog Create Volume Group @title CreateVolumeGroupJob Creating new volume group named %1… @status Creating new volume group named %1… @status The installer failed to create a volume group named '%1'. DeactivateVolumeGroupJob Deactivating volume group named %1… @status Deactivating volume group named %1… @status The installer failed to deactivate a volume group named %1. DeletePartitionJob Deleting partition %1… @status Deleting partition %1… @status The installer failed to delete partition %1. ตัวติดตั้งไม่สามารถลบพาร์ทิชัน %1 DeviceInfoWidget This partition table type is only advisable on older systems which start from a BIOS boot environment. GPT is recommended in most other cases. Warning: the MBR partition table is an obsolete MS-DOS era standard. Only 4 primary partitions may be created, and of those 4, one can be an extended partition, which may in turn contain many logical partitions. This is the recommended partition table type for modern systems which start from an EFI boot environment. This is a loop device. It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. This installer cannot detect a partition table on the selected storage device. The device either has no partition table, or the partition table is corrupted or of an unknown type. This installer can create a new partition table for you, either automatically, or through the manual partitioning page. This device has a %1 partition table. อุปกรณ์นี้มีตารางพาร์ทิชัน %1 The type of partition table on the selected storage device. The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device. This installer will keep the current partition table unless you explicitly choose otherwise. If unsure, on modern systems GPT is preferred. DeviceModel %1 - %2 (%3) device[name] - size[number] (device-node[name]) %1 - %2 (%3) %1 - (%2) device[name] - (device-node[name]) DracutLuksCfgJob Writing LUKS configuration for Dracut to %1… @status Skipping writing LUKS configuration for Dracut: "/" partition is not encrypted @info Failed to open %1 @error ไม่สามารถเปิด %1 DummyCppJob Performing dummy C++ job… @status EditExistingPartitionDialog Edit Existing Partition แก้ไขพาร์ทิชันที่มีอยู่เดิม Con&tent: &Keep &เก็บไว้ Format ฟอร์แมท Warning: Formatting the partition will erase all existing data. คำเตือน: การฟอร์แมทพาร์ทิชันจะลบข้อมูลที่มีอยู่เดิมทั้งหมด &Mount Point: &M จุดเชื่อมต่อ: Si&ze: &Z ขนาด: MiB Fi&le System: Flags: Flags: Label for the filesystem FS Label: Passphrase for existing partition Partition %1 could not be decrypted with the given passphrase. Edit the partition again and give the correct passphrase or delete and create a new encrypted partition. EncryptWidget En&crypt system Your system does not seem to support encryption well enough to encrypt the entire system. You may enable encryption, but performance may suffer. Passphrase Confirm passphrase Please enter the same passphrase in both boxes. @tooltip Password must be a minimum of %1 characters. @tooltip ErrorDialog Details: Would you like to paste the install log to the web? FillGlobalStorageJob Set partition information @title ตั้งค่าข้อมูลพาร์ทิชัน Install %1 on new %2 system partition with features %3 @info Install %1 on new %2 system partition @info Set up new %2 partition with mount point %1 and features %3 @info Set up new %2 partition with mount point %1%3 @info Install %2 on %3 system partition %1 with features %4 @info Install %2 on %3 system partition %1 @info Set up %3 partition %1 with mount point %2 and features %4 @info Set up %3 partition %1 with mount point %2%4… @info Install boot loader on %1… @info Setting up mount points… @status FinishedPage &Restart now &R เริ่มต้นใหม่ทันที <h1>All done.</h1> %1 has been set up on your computer. You may now start using your new system. @info <html><head/><body>When this box is checked, your system will restart immediately when you click on Done or close the setup program.</body></html> @tooltip <h1>All done.</h1> %1 has been installed on your computer. You may now restart into your new system, or continue using the %2 Live environment. @info <h1>เสร็จสิ้น</h1> %1 ติดตั้งบนคอมพิวเตอร์ของคุณเรียบร้อย คุณสามารถเริ่มต้นใหม่เพื่อเข้าสู่ระบบใหม่ของคุณ หรือดำเนินการใช้ %2 ในแบบไม่ต้องติดตั้ง (Live) ต่อไป <html><head/><body>When this box is checked, your system will restart immediately when you click on Done or close the installer.</body></html> @tooltip <h1>Setup Failed</h1> %1 has not been set up on your computer. The error message was: %2. @info, %1 is product name with version <h1>Installation Failed</h1> %1 has not been installed on your computer. The error message was: %2. @info, %1 is product name with version <h1>การติดตั้งไม่สำเร็จ</h1> %1 ไม่ได้ถูกติดตั้งลงบนคอมพิวเตอร์ของคุณ ข้อความข้อผิดพลาดคือ: %2 FinishedQmlViewStep Finish @label สิ้นสุด FinishedViewStep Finish @label สิ้นสุด FormatPartitionJob Format partition %1 (file system: %2, size: %3 MiB) on %4 @title Format %3MiB partition %1 with file system %2 @info %1 (%2) partition label %1 (device path %2) %1 (%2) Formatting partition %1 with file system %2… @status The installer failed to format partition %1 on disk '%2'. ตัวติดตั้งไม่สามารถฟอร์แมทพาร์ทิชัน %1 บนดิสก์ '%2' GeneralRequirements Please ensure the system has at least %1 GiB available drive space. Available drive space is all of the hard disks and SSDs connected to the system. There is not enough drive space. At least %1 GiB is required. has at least %1 GiB working memory The system does not have enough working memory. At least %1 GiB is required. is plugged in to a power source เชื่อมต่อปลั๊กเข้ากับแหล่งจ่ายไฟ The system is not plugged in to a power source. ระบบนี้ไม่ได้เชื่อมต่อปลั๊กเข้ากับแหล่งจ่ายไฟ is connected to the Internet เชื่อมต่อกับอินเทอร์เน็ต The system is not connected to the Internet. ระบบไม่ได้เชื่อมต่อกับอินเทอร์เน็ต is running the installer as an administrator (root) The setup program is not running with administrator rights. The installer is not running with administrator rights. has a screen large enough to show the whole installer มีหน้าจอใหญ่พอที่จะแสดงผลตัวติดตั้งได้ทั้งหมด The screen is too small to display the setup program. The screen is too small to display the installer. หน้าจอเล็กเกินกว่าที่จะแสดงผลตัวติดตั้ง is always false The computer says no. is always false (slowly) The computer says no (slowly). is always true The computer says yes. is always true (slowly) The computer says yes (slowly). is checked three times. The snark has not been checked three times. The (some mythological beast) has not been checked three times. HostInfoJob Collecting information about your machine… @status IDJob OEM Batch Identifier Could not create directories <code>%1</code>. Could not open file <code>%1</code>. Could not write to file <code>%1</code>. InitcpioJob Creating initramfs with mkinitcpio… @status InitramfsJob Creating initramfs… @status InteractiveTerminalPage Konsole not installed. @error Please install KDE Konsole and try again! @info Executing script:  <code>%1</code> @info InteractiveTerminalViewStep Script @label KeyboardQmlViewStep Keyboard @label แป้นพิมพ์ KeyboardViewStep Keyboard @label แป้นพิมพ์ LCLocaleDialog System Locale Setting @title The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info &Cancel @button &C ยกเลิก &OK @button &O ตกลง LOSHJob Configuring encrypted swap. No target system available. No rootMountPoint is set. No configFilePath is set. LicensePage <h1>License Agreement</h1> I accept the terms and conditions above. @info Please review the End User License Agreements (EULAs). @info This setup procedure will install proprietary software that is subject to licensing terms. @info If you do not agree with the terms, the setup procedure cannot continue. @info This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. @info If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. @info LicenseViewStep License @label LicenseWidget URL: %1 @label %1 driver by %2 @label, %1 is product name, %2 is product vendor %1 is an untranslatable product name, example: Creative Audigy driver %1 graphics driver by %2 @label, %1 is product name, %2 is product vendor %1 is usually a vendor name, example: Nvidia graphics driver %1 browser plugin by %2 @label, %1 is product name, %2 is product vendor %1 codec by %2 @label, %1 is product name, %2 is product vendor %1 package by %2 @label, %1 is product name, %2 is product vendor %1 by %2 @label, %1 is product name, %2 is product vendor File: %1 @label ไฟล์: %1 Hide the license text @tooltip Show the license text @tooltip Open the license agreement in browser @tooltip LocalePage Region: @label ภูมิภาค: Zone: @label โซน: &Change… @button LocaleQmlViewStep Location @label ตำแหน่ง LocaleTests Quit ออก LocaleViewStep Location @label ตำแหน่ง LuksBootKeyFileJob Configuring LUKS key file. No partitions are defined. Encrypted rootfs setup error Root partition %1 is LUKS but no passphrase has been set. Could not create LUKS key file for root partition %1. MachineIdJob Generate machine-id. Configuration Error No root mount point is set for MachineId. File not found ไม่พบไฟล์ Path <pre>%1</pre> must be an absolute path. Could not create new random file <pre>%1</pre>. Map Timezone: %1 @label เขตเวลา: %1 Please select your preferred location on the map so the installer can suggest the locale and timezone settings for you. You can fine-tune the suggested settings below. Search the map by dragging to move and using the +/- buttons to zoom in/out or use mouse scrolling for zooming. @info Map-qt6 Timezone: %1 @label เขตเวลา: %1 Please select your preferred location on the map so the installer can suggest the locale and timezone settings for you. You can fine-tune the suggested settings below. Search the map by dragging to move and using the +/- buttons to zoom in/out or use mouse scrolling for zooming. @label NetInstallViewStep Package selection เลือกแพ็กเกจ Office software Office package Browser software Browser package Web browser Kernel label for netinstall module, Linux kernel เคอร์เนล Services label for netinstall module, system services บริการ Login label for netinstall module, choose login manager เข้าสู่ระบบ Desktop label for netinstall module, choose desktop environment เดสก์ท็อป Applications แอปพลิเคชัน Communication label for netinstall module การสื่อสาร Development label for netinstall module การพัฒนา Office label for netinstall module ออฟฟิศ Multimedia label for netinstall module สื่อ Internet label for netinstall module อินเทอร์เน็ต Theming label for netinstall module การปรับแต่ง Gaming label for netinstall module เกม Utilities label for netinstall module NotesQmlViewStep Notes OEMPage Ba&tch: <html><head/><body>Enter a batch-identifier here. This will be stored in the target system.</body></html> <html><head/><body><h1>OEM Configuration</h1>Calamares will use OEM settings while configuring the target system.</body></html> OEMViewStep OEM Configuration Set the OEM Batch Identifier to <code>%1</code>. Offline Select your preferred region, or use the default settings @label Timezone: %1 @label เขตเวลา: %1 Select your preferred zone within your region @label Zones @button เขต You can fine-tune language and locale settings below @label Offline-qt6 Select your preferred region, or use the default settings @label Timezone: %1 @label เขตเวลา: %1 Select your preferred zone within your region @label Zones @button เขต You can fine-tune language and locale settings below @label PWQ Password is too short รหัสผ่านสั้นเกินไป Password is too long รหัสผ่านยาวเกินไป Password is too weak รหัสผ่านอ่อนเกินไป Memory allocation error when setting '%1' Memory allocation error The password is the same as the old one รหัสผ่านเหมือนกับรหัสผ่านเก่า The password is a palindrome The password differs with case changes only The password is too similar to the old one รหัสผ่านคล้ายกับรหัสผ่านเก่าจนเกินไป The password contains the user name in some form The password contains words from the real name of the user in some form The password contains forbidden words in some form The password contains fewer than %n digits The password contains too few digits The password contains fewer than %n uppercase letters The password contains too few uppercase letters The password contains fewer than %n lowercase letters The password contains too few lowercase letters The password contains fewer than %n non-alphanumeric characters The password contains too few non-alphanumeric characters The password is shorter than %n characters The password is too short รหัสผ่านสั้นเกินไป The password is a rotated version of the previous one The password contains fewer than %n character classes The password does not contain enough character classes The password contains more than %n same characters consecutively The password contains too many same characters consecutively The password contains more than %n characters of the same class consecutively The password contains too many characters of the same class consecutively The password contains monotonic sequence longer than %n characters The password contains too long of a monotonic character sequence No password supplied ไม่ได้กำหนดรหัสผ่าน Cannot obtain random numbers from the RNG device Password generation failed - required entropy too low for settings The password fails the dictionary check - %1 The password fails the dictionary check Unknown setting - %1 Unknown setting Bad integer value of setting - %1 Bad integer value Setting %1 is not of integer type Setting is not of integer type Setting %1 is not of string type Setting is not of string type Opening the configuration file failed The configuration file is malformed Fatal failure Unknown error ข้อผิดพลาดที่ไม่รู้จัก PackageChooserPage Product Name ชื่อผลิตภัณฑ์ TextLabel Long Product Description คำอธิบายผลิตภัณฑ์แบบยาว Package Selection เลือกแพ็กเกจ Please pick a product from the list. The selected product will be installed. เลือกผลิตภัณฑ์จากรายการ ผลิตภัณฑ์ที่เลือกไว้จะถูกติดตั้ง PackageModel Name ชื่อ Description คำอธิบาย Page_Keyboard Keyboard model: Type here to test your keyboard พิมพ์ที่นี่เพื่อทดสอบแป้นพิมพ์ของคุณ Switch Keyboard: shortcut for switching between keyboard layouts Page_UserSetup What is your name? ชื่อของคุณคืออะไร? Your Full Name ชื่อเต็มของคุณ What name do you want to use to log in? ใส่ชื่อที่คุณต้องการใช้ในการเข้าสู่ระบบ login เข้าสู่ระบบ What is the name of this computer? คอมพิวเตอร์เครื่องนี้ชื่ออะไร? This name will be used if you make the computer visible to others on a network. ชื่อนี้จะถูกใช้ถ้าคุณตั้งค่าให้เครื่องอื่นๆ มองเห็นคอมพิวเตอร์ของคุณบนเครือข่าย Computer Name ชื่อคอมพิวเตอร์ Choose a password to keep your account safe. เลือกรหัสผ่านเพื่อรักษาบัญชีผู้ใช้ของคุณให้ปลอดภัย Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. ใส่รหัสผ่านเดียวกันซ้ำ 2 ครั้ง เพื่อเป็นการตรวจสอบข้อผิดพลาดจากการพิมพ์ รหัสผ่านที่ดีจะต้องมีการผสมกันระหว่าง ตัวอักษรภาษาอังกฤษ ตัวเลข และสัญลักษณ์ ควรมีความยาวอย่างน้อย 8 ตัวอักขระ และควรมีการเปลี่ยนรหัสผ่านเป็นประจำ Password รหัสผ่าน Repeat Password กรอกรหัสผ่านซ้ำ When this box is checked, password-strength checking is done and you will not be able to use a weak password. Require strong passwords. Log in automatically without asking for the password. Use the same password for the administrator account. Choose a password for the administrator account. เลือกรหัสผ่านสำหรับบัญชีผู้ใช้ผู้ดูแลระบบ Enter the same password twice, so that it can be checked for typing errors. ใส่รหัสผ่านเดิมซ้ำ 2 ครั้ง เพื่อเป็นการตรวจสอบข้อผิดพลาดที่เกิดจากการพิมพ์ Use Active Directory Domain: Domain Administrator: Password: IP Address (optional): PartitionLabelsView Root Home @label Boot @label EFI system @label Swap @label New partition for %1 @label New partition @label พาร์ทิชันใหม่ %1 %2 size[number] filesystem[name] PartitionModel Free Space @title พื้นที่ว่าง New Partition @title Name @title ชื่อ File System @title ระบบไฟล์ File System Label @title Mount Point @title จุดเชื่อมต่อ Size @title ขนาด PartitionPage Storage de&vice: &Revert All Changes &R คืนค่าการเปลี่ยนแปลงทั้งหมด New Partition &Table &T ตารางพาร์ทิชันใหม่ Cre&ate &Edit &E แก้ไข &Delete &D ลบ New Volume Group Resize Volume Group Deactivate Volume Group Remove Volume Group I&nstall boot loader on: Are you sure you want to create a new partition table on %1? คุณแน่ใจว่าจะสร้างตารางพาร์ทิชันใหม่บน %1? Can not create new partition The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead. PartitionViewStep Gathering system information… @status Partitions @label พาร์ทิชัน Install %1 alongside another operating system @label Erase disk and install %1 @label Replace a partition with %1 @label Manual partitioning @label Install %1 alongside another operating system on disk %2 (%3) @info Erase disk %2 (%3) and install %1 @info Replace a partition on disk %2 (%3) with %1 @info Manual partitioning on disk %1 (%2) @info Disk %1 (%2) @info ดิสก์ %1 (%2) Unsafe partition actions are enabled. Partitioning is configured to always fail. No partitions will be changed. Current: @label ปัจจุบัน: After: @label หลัง: An EFI system partition is necessary to start %1. To configure an EFI system partition, go back and select or create a suitable filesystem. An EFI system partition is necessary to start %1. The EFI system partition does not meet recommendations. It is recommended to go back and select or create a suitable filesystem. The filesystem must be mounted on %1. The filesystem must have type FAT32. The filesystem must have flag %1 set. The filesystem must be at least %1 MiB in size. The minimum recommended size for the filesystem is %1 MiB. You can continue without setting up an EFI system partition but your system may fail to start. You can continue with this EFI system partition configuration but your system may fail to start. No EFI system partition configured EFI system partition configured incorrectly EFI system partition recommendation Option to use GPT on BIOS A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too. To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the %2 flag enabled. An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT. Boot partition not encrypted A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted. There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition. You may continue if you wish, but filesystem unlocking will happen later during system startup. To encrypt the boot partition, go back and recreate it, selecting Encrypt in the partition creation window. has at least one disk device available. There are no partitions to install on. PlasmaLnfJob Applying Plasma Look-and-Feel… @status Could not select KDE Plasma Look-and-Feel package PlasmaLnfPage Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is set up. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel. Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel. PlasmaLnfViewStep Look-and-Feel @label PowerManagementInterface Calamares Installation in progress @status PreserveFiles Saving files for later… @status No files configured to save for later. Not all of the configured files could be preserved. ProcessResult There was no output from the command. Output: External command crashed. Command %1 crashed. External command failed to start. Command %1 failed to start. Internal error when starting command. Bad parameters for process job call. พารามิเตอร์ไม่ถูกต้องสำหรับการเรียกการทำงาน External command failed to finish. Command %1 failed to finish in %2 seconds. External command finished with errors. Command %1 finished with exit code %2. QObject %1 (%2) %1 (%2) unknown @partition info extended @partition info unformatted @partition info swap @partition info Default ค่าเริ่มต้น Directory not found Could not create new random file <pre>%1</pre>. No product No description provided. ไม่ได้ระบุคำอธิบาย (no mount point) Unpartitioned space or unknown partition table @info Recommended This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. RemoveUserJob Removing live user from the target system… @status RemoveVolumeGroupJob Removing Volume Group named %1… @status Removing Volume Group named %1… @status The installer failed to remove a volume group named '%1'. Requirements This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. This computer does not satisfy some of the recommended requirements for setting up %1. Setup can continue, but some features might be disabled. ResizeFSJob Performing file system resize… @status Invalid configuration @error The file-system resize job has an invalid configuration and will not run. @error KPMCore not available @error Calamares cannot start KPMCore for the file system resize job. @error Resize failed. @error The filesystem %1 could not be found in this system, and cannot be resized. @info The device %1 could not be found in this system, and cannot be resized. @info Resize Failed @error The filesystem %1 cannot be resized. @error The device %1 cannot be resized. @error The file system %1 must be resized, but cannot. @info The device %1 must be resized, but cannot @info ResizePartitionJob Resize partition %1 @title Resize %2MiB partition %1 to %3MiB @info Resizing %2MiB partition %1 to %3MiB… @status The installer failed to resize partition %1 on disk '%2'. ตัวติดตั้งไม่สามารถเปลี่ยนขนาดพาร์ทิชัน %1 บนดิสก์ '%2' ResizeVolumeGroupDialog Resize Volume Group @title ResizeVolumeGroupJob Resize volume group named %1 from %2 to %3 @title Resize volume group named %1 from %2 to %3 @info Resizing volume group named %1 from %2 to %3… @status The installer failed to resize a volume group named '%1'. ResultsListWidget Checking requirements again in a few seconds ... ScanningDialog Scanning storage devices… @status Partitioning… @status SetHostNameJob Set hostname %1 ตั้งค่าชื่อโฮสต์ %1 Set hostname %1. Setting hostname %1… @status Internal Error ข้อผิดพลาดภายใน Cannot write hostname to target system ไม่สามารถเขียนชื่อโฮสต์ไปที่ระบบเป้าหมาย SetKeyboardLayoutJob Setting keyboard model to %1, layout as %2-%3… @status, %1 model, %2 layout, %3 variant Failed to write keyboard configuration for the virtual console. @error ไม่สามารถเขียนการตั้งค่าแป้นพิมพ์สำหรับคอนโซลเสมือน Failed to write to %1 @error, %1 is virtual console configuration path ไม่สามารถเขียนไปที่ %1 Failed to write keyboard configuration for X11. @error ไม่สามาถเขียนการตั้งค่าแป้นพิมพ์สำหรับ X11 Failed to write to %1 @error, %1 is keyboard configuration path ไม่สามารถเขียนไปที่ %1 Failed to write keyboard configuration to existing /etc/default directory. @error Failed to write to %1 @error, %1 is default keyboard path ไม่สามารถเขียนไปที่ %1 SetPartFlagsJob Set flags on partition %1 @title Set flags on %1MiB %2 partition @title Set flags on new partition @title Clear flags on partition %1 @info Clear flags on %1MiB %2 partition @info Clear flags on new partition @info Set flags on partition %1 to %2 @info Set flags on %1MiB %2 partition to %3 @info Set flags on new partition to %1 @info Clearing flags on partition %1… @status Clearing flags on %1MiB %2 partition… @status Clearing flags on new partition… @status Setting flags %2 on partition %1… @status Setting flags %3 on %1MiB %2 partition… @status Setting flags %1 on new partition… @status The installer failed to set flags on partition %1. SetPasswordJob Set password for user %1 ตั้งรหัสผ่านสำหรับผู้ใช้ %1 Setting password for user %1… @status Bad destination system path. path ของระบบเป้าหมายไม่ถูกต้อง rootMountPoint is %1 rootMountPoint คือ %1 Cannot disable root account. usermod terminated with error code %1. usermod จบด้วยโค้ดข้อผิดพลาด %1 Cannot set password for user %1. ไม่สามารถตั้งค่ารหัสผ่านสำหรับผู้ใช้ %1 SetTimezoneJob Setting timezone to %1/%2… @status Cannot access selected timezone path. @error ไม่สามารถเข้าถึง path โซนเวลาที่เลือก Bad path: %1 @error path ไม่ถูกต้อง: %1 Cannot set timezone. @error ไม่สามารถตั้งค่าโซนเวลาได้ Link creation failed, target: %1; link name: %2 @info การสร้างการเชื่อมโยงล้มเหลว เป้าหมาย: %1 ชื่อการเชื่อมโยง: %2 Cannot open /etc/timezone for writing @info SetupGroupsJob Preparing groups… @status Could not create groups in target system These groups are missing in the target system: %1 SetupSudoJob Configuring <pre>sudo</pre> users… @status Cannot chmod sudoers file. ไม่สามารถ chmod ไฟล์ sudoers Cannot create sudoers file for writing. ไม่สามารถสร้างไฟล์ sudoers เพื่อเขียนได้ ShellProcessJob Running shell processes… @status SlideCounter %L1 / %L2 slide counter, %1 of %2 (numeric) StandardButtons &OK &O ตกลง &Yes &ใช่ &No &ไม่ &Cancel &C ยกเลิก &Close ปิ&ด TrackingInstallJob Installation feedback Sending installation feedback… @status Internal error in install-tracking. HTTP request timed out. TrackingKUserFeedbackJob KDE user feedback Configuring KDE user feedback… @status Error in KDE user feedback configuration. Could not configure KDE user feedback correctly, script error %1. Could not configure KDE user feedback correctly, Calamares error %1. TrackingMachineUpdateManagerJob Machine feedback Configuring machine feedback… @status Error in machine feedback configuration. Could not configure machine feedback correctly, script error %1. Could not configure machine feedback correctly, Calamares error %1. TrackingPage Placeholder <html><head/><body>Click here to send no information at all about your installation.</body></html> <html><head/><body><a href="placeholder">Click here for more information about user feedback</a></body></html> Tracking helps %1 to see how often it is installed, what hardware it is installed on and which applications are used. To see what will be sent, please click the help icon next to each area. By selecting this you will send information about your installation and hardware. This information will only be sent once after the installation finishes. By selecting this you will periodically send information about your machine installation, hardware and applications, to %1. By selecting this you will regularly send information about your user installation, hardware, applications and application usage patterns, to %1. TrackingViewStep Feedback @title UmountJob Unmounting file systems… @status No target system available. No rootMountPoint is set. UsersPage If more than one person will use this computer, you can create multiple accounts after setup. If more than one person will use this computer, you can create multiple accounts after installation. UsersQmlViewStep Users ผู้ใช้ UsersViewStep Users ผู้ใช้ VariantModel Key Column header for key/value Value Column header for key/value ค่า VolumeGroupBaseDialog Create Volume Group List of Physical Volumes Volume Group Name: Volume Group Type: Physical Extent Size: MiB Total Size: ขนาดทั้งหมด: Used Size: ขนาดที่ใช้ไป: Total Sectors: Quantity of LVs: WelcomePage Select application and system language Open donations website &Donate Open help and support website เปิดเว็บไซต์ช่วยเหลือและสนับสนุน &Support &S ช่วยเหลือ Open issues and bug-tracking website &Known issues &K ปัญหาที่รู้จัก Open release notes website &Release notes About %1 Setup @title About %1 Installer @title %1 Support @action WelcomeQmlViewStep Welcome @title ยินดีต้อนรับ WelcomeViewStep Welcome @title ยินดีต้อนรับ ZfsJob Creating ZFS pools and datasets… @status Failed to create zpool on Configuration Error No partitions are available for ZFS. Internal data missing Failed to create zpool Failed to create dataset The output was: calamares-sidebar About เกี่ยวกับ Debug แก้ไขข้อบกพร่อง About @button เกี่ยวกับ Show information about Calamares @tooltip Debug @button แก้ไขข้อบกพร่อง Show debug information @tooltip แสดงข้อมูลการดีบั๊ก finishedq Installation Completed การติดตั้งเสร็จสิ้น %1 has been installed on your computer. You may now restart into your new system, or continue using the Live environment. Close Installer ปิดตัวติดตั้ง Restart System เริ่มต้นระบบใหม่ A full log of the install is available as installation.log in the home directory of the Live user. This log is copied to /var/log/installation.log of the target system. finishedq-qt6 Installation Completed @title การติดตั้งเสร็จสิ้น %1 has been installed on your computer. You may now restart into your new system, or continue using the Live environment. @info, %1 is the product name Close Installer @button ปิดตัวติดตั้ง Restart System @button เริ่มต้นระบบใหม่ A full log of the install is available as installation.log in the home directory of the Live user. This log is copied to /var/log/installation.log of the target system. @info finishedq@mobile Installation Completed @title การติดตั้งเสร็จสิ้น %1 has been installed on your computer. You may now restart your device. @info, %1 is the product name Close @button Restart @button keyboardq Select a layout to activate keyboard preview @label Keyboard model:   @label Layout @label Variant @label Type here to test your keyboard… @label keyboardq-qt6 Select a layout to activate keyboard preview @label Keyboard model:   @label Layout @label Variant @label Type here to test your keyboard… @label localeq Change @button เปลี่ยน <h3>Languages</h3> The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info <h3>Locales</h3> The system locale setting affects the numbers and dates format. The current setting is %1. @info localeq-qt6 Change @button เปลี่ยน <h3>Languages</h3> The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. @info <h3>Locales</h3> The system locale setting affects the numbers and dates format. The current setting is %1. @info notesqml <h3>%1</h3> These are example release notes. packagechooserq LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market. Default option. LibreOffice If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives. No Office Suite Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support. It will be just a desktop, file browser, package manager, text editor and simple web-browser. Minimal Install Please select an option for your install, or use the default: LibreOffice included. packagechooserq-qt6 LibreOffice is a powerful and free office suite, used by millions of people around the world. It includes several applications that make it the most versatile Free and Open Source office suite on the market. Default option. LibreOffice If you don't want to install an office suite, just select No Office Suite. You can always add one (or more) later on your installed system as the need arrives. No Office Suite Create a minimal Desktop install, remove all extra applications and decide later on what you would like to add to your system. Examples of what won't be on such an install, there will be no Office Suite, no media players, no image viewer or print support. It will be just a desktop, file browser, package manager, text editor and simple web-browser. Minimal Install Please select an option for your install, or use the default: LibreOffice included. release_notes ### %1 This an example QML file, showing options in Markdown with Flickable content. QML with RichText can use HTML tags, with Markdown it uses the simple Markdown syntax, Flickable content is useful for touchscreens. **This is bold text** *This is italic text* _This is underlined text_ > blockquote ~~This is strikethrough~~ Code example: ``` ls -l /home ``` **Lists:** * Intel CPU systems * AMD CPU systems The vertical scrollbar is adjustable, current width set to 10. Back ย้อนกลับ usersq Pick your user name and credentials to login and perform admin tasks What is your name? ชื่อของคุณคืออะไร? Your full name What name do you want to use to log in? ใส่ชื่อที่คุณต้องการใช้ในการเข้าสู่ระบบ Login name If more than one person will use this computer, you can create multiple accounts after installation. Only lowercase letters, numbers, underscore and hyphen are allowed. root is not allowed as username. What is the name of this computer? คอมพิวเตอร์เครื่องนี้ชื่ออะไร? Computer name This name will be used if you make the computer visible to others on a network. Only letters, numbers, underscore and hyphen are allowed, minimal of two characters. localhost is not allowed as hostname. Choose a password to keep your account safe. เลือกรหัสผ่านเพื่อรักษาบัญชีผู้ใช้ของคุณให้ปลอดภัย Password รหัสผ่าน Repeat password Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. Reuse user password as root password Use the same password for the administrator account. Choose a root password to keep your account safe. Root password Repeat root password Enter the same password twice, so that it can be checked for typing errors. Log in automatically without asking for the password Validate passwords quality When this box is checked, password-strength checking is done and you will not be able to use a weak password. usersq-qt6 Pick your user name and credentials to login and perform admin tasks What is your name? ชื่อของคุณคืออะไร? Your full name What name do you want to use to log in? ใส่ชื่อที่คุณต้องการใช้ในการเข้าสู่ระบบ Login name If more than one person will use this computer, you can create multiple accounts after installation. Only lowercase letters, numbers, underscore and hyphen are allowed. root is not allowed as username. What is the name of this computer? คอมพิวเตอร์เครื่องนี้ชื่ออะไร? Computer name This name will be used if you make the computer visible to others on a network. Only letters, numbers, underscore and hyphen are allowed, minimal of two characters. localhost is not allowed as hostname. Choose a password to keep your account safe. เลือกรหัสผ่านเพื่อรักษาบัญชีผู้ใช้ของคุณให้ปลอดภัย Password รหัสผ่าน Repeat password Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. Reuse user password as root password Use the same password for the administrator account. Choose a root password to keep your account safe. Root password Repeat root password Enter the same password twice, so that it can be checked for typing errors. Log in automatically without asking for the password Validate passwords quality When this box is checked, password-strength checking is done and you will not be able to use a weak password. welcomeq <h3>Welcome to the %1 <quote>%2</quote> installer</h3> This program will ask you some questions and set up %1 on your computer. Support Known Issues Release Notes Donate welcomeq-qt6 <h3>Welcome to the %1 <quote>%2</quote> installer</h3> This program will ask you some questions and set up %1 on your computer. Support Known Issues Release Notes Donate