AlongsidePage Choose partition to shrink: Изаберите партицију за смањивање: Allocate drive space by dragging the divider below: Издвојте простор на диску повлачећи граничник испод: With this operation, the partition %1 which contains %4 will be shrunk to %2MB and a new %3MB partition will be created for %5. An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. The EFI system partition at %1 will be used for starting %2. EFI system partition: BootInfoWidget The boot environment of this system. Older x86 systems only support BIOS. Modern systems usually use EFI, but may also show up as BIOS if started in compatibility mode. This system was started with an EFI boot environment. To configure startup from an EFI environment, this installer must deploy a boot loader application, like GRUB or systemd-boot on an EFI System Partition. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. This system was started with a BIOS boot environment. To configure startup from a BIOS environment, this installer must install a boot loader, like GRUB, either at the beginning of a partition or on the Master Boot Record near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. BootLoaderModel Master Boot Record of %1 Boot Partition Партиција за покретање система System Partition Системска партиција Do not install a boot loader %1 (%2) Calamares::DebugWindow Form GlobalStorage JobQueue Modules Tools Debug information Calamares::ExecutionViewStep Install Calamares::JobThread Done Завршено Calamares::ProcessJob Run command %1 %2 Running command %1 %2 External command crashed Извршавање спољашње команде није успело Command %1 crashed. Output: %2 Извршавање команде %1 није успело. Порука: %2 External command failed to start Покретање спољашње команде није успело Command %1 failed to start. Покретање команде %1 није успело Internal error when starting command Интерна грешка при покретању команде Bad parameters for process job call. Погрешни параметри код позива функције у процесу. External command failed to finish Извршавање екстерне команде није завршено. Command %1 failed to finish in %2s. Output: %3 Извршавање команде %1 није завршено у %2s. Повратна порука: %3 External command finished with errors Извршавање спољашње команде извршено уз грешке. Command %1 finished with exit code %2. Output: %3 Команда %1 завршена са излазним кодом %2. Повратна порука: %3 Calamares::PythonJob Running %1 operation. Bad working directory path Лоша путања радног директоријума Working directory %1 for python job %2 is not readable. Није могуће прочитати радни директоријум %1 за функцију %2 у питону. Bad main script file Неисправан главни фајл скрипте Main script file %1 for python job %2 is not readable. Није могуће прочитати главни фајл скрипте %1 за питон функцију %2 Boost.Python error in job "%1". Грешка у функцији %1 C++ библиотеке Boost.Python. Calamares::ViewManager &Back &Назад &Next &Даље &Cancel &Прекини Cancel installation? Прекини инсталацију Do you really want to cancel the current install process? The installer will quit and all changes will be lost. Да ли стварно желите да прекинете текући процес инсталације? Инсталер ће бити затворен и све промене ће бити изгубљене. Continue with setup? The %1 installer is about to make changes to your disk in order to install %2. You will not be able to undo these changes. &Install now Go &back &Quit &Затвори Error Грешка Installation Failed Инсталација није успела CalamaresPython::Helper Unknown exception type Непознат тип изузетка unparseable Python error unparseable Python traceback Unfetchable Python error. CalamaresWindow %1 Installer %1 инсталер Show debug information CheckFileSystemJob Checking file system on partition %1. Провера фајл система на партицији %1. The file system check on partition %1 failed. Провера фајл система на партицији %1 није успела. CheckerWidget This computer does not satisfy the minimum requirements for installing %1. Installation cannot continue. <a href="#details">Details...</a> This computer does not satisfy some of the recommended requirements for installing %1. Installation can continue, but some features might be disabled. This program will ask you some questions and set up %2 on your computer. For best results, please ensure that this computer: System requirements ChoicePage Form After: Manual partitioning You can create or resize partitions yourself. Boot loader location: %1 will be shrunk to %2MB and a new %3MB partition will be created for %4. Select storage de&vice: Current: Reuse %1 as home partition for %2. Select a partition to shrink, then drag the bottom bar to resize Select a partition to install on An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. The EFI system partition at %1 will be used for starting %2. EFI system partition: This storage device does not seem to have an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. Erase disk This will delete all data currently present on the selected storage device. This storage device has %1 on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. Install alongside The installer will shrink a partition to make room for %1. Replace a partition Replaces a partition with %1. This storage device already has an operating system on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. This storage device has multiple operating systems on it. What would you like to do? You will be able to review and confirm your choices before any change is made to the storage device. ClearMountsJob Clear mounts for partitioning operations on %1 Уклони тачке припајања за операције партиције на %1 Clearing mounts for partitioning operations on %1. Cleared all mounts for %1 Уклоњене све тачке припајања за %1 ClearTempMountsJob Clear all temporary mounts. Clearing all temporary mounts. Cannot get list of temporary mounts. Cleared all temporary mounts. CreatePartitionDialog Create a Partition Направи партицију Partition &Type: &Тип партиције &Primary &Примарна E&xtended П&роширена Fi&le System: Flags: &Mount Point: Тачка &припајања: Si&ze: Вели&чина MB MB En&crypt Logical Логичка Primary Примарна GPT GPT CreatePartitionJob Create new %2MB partition on %4 (%3) with file system %1. Create new %2MB partition on %4 (%3) with file system %1. Creating new %1 partition on %2. The installer failed to create partition on disk '%1'. Инсталација није успела да направи партицију на диску '%1'. Could not open device '%1'. Није могуће отворити уређај '%1'. Could not open partition table. Није могуће отворити табелу партиција The installer failed to create file system on partition %1. Инсталација није успела да направи фајл систем на партицији %1. The installer failed to update partition table on disk '%1'. Инсталација није успела да ажурира табелу партиција на диску '%1'. CreatePartitionTableDialog Create Partition Table Направи табелу партиција Creating a new partition table will delete all existing data on the disk. Прављење нове партиције табела ће обрисати све постојеће податке на диску. What kind of partition table do you want to create? Какву табелу партиција желите да направите? Master Boot Record (MBR) GUID Partition Table (GPT) GUID партициона табела (GPT) CreatePartitionTableJob Create new %1 partition table on %2. Create new %1 partition table on %2 (%3). Creating new %1 partition table on %2. The installer failed to create a partition table on %1. Инсталација није успела да направи табелу партиција на %1. Could not open device %1. Није могуће отворити уређај %1. CreateUserJob Create user %1 Направи корисника %1 Create user %1. Creating user %1. Sudoers dir is not writable. Није могуће писати у "Судоерс" директоријуму. Cannot create sudoers file for writing. Cannot chmod sudoers file. Није могуће променити мод (chmod) над "судоерс" фајлом Cannot open groups file for reading. Cannot create user %1. Није могуће направити корисника %1. useradd terminated with error code %1. Cannot add user %1 to groups: %2. usermod terminated with error code %1. Cannot set home directory ownership for user %1. chown terminated with error code %1. DeletePartitionJob Delete partition %1. Delete partition %1. Deleting partition %1. The installer failed to delete partition %1. Partition (%1) and device (%2) do not match. Could not open device %1. Could not open partition table. DeviceInfoWidget The type of partition table on the selected storage device. The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device. This installer will keep the current partition table unless you explicitly choose otherwise. If unsure, on modern systems GPT is preferred. This device has a %1 partition table. This is a loop device. It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. This installer cannot detect a partition table on the selected storage device. The device either has no partition table, or the partition table is corrupted or of an unknown type. This installer can create a new partition table for you, either automatically, or through the manual partitioning page. This is the recommended partition table type for modern systems which start from an EFI boot environment. This partition table type is only advisable on older systems which start from a BIOS boot environment. GPT is recommended in most other cases. Warning: the MBR partition table is an obsolete MS-DOS era standard. Only 4 primary partitions may be created, and of those 4, one can be an extended partition, which may in turn contain many logical partitions. DeviceModel %1 - %2 (%3) DracutLuksCfgJob Write LUKS configuration for Dracut to %1 Skip writing LUKS configuration for Dracut: "/" partition is not encrypted Failed to open %1 DummyCppJob Dummy C++ Job EditExistingPartitionDialog Edit Existing Partition Content: Садржај: &Keep Format Форматирај Warning: Formatting the partition will erase all existing data. Упозорење: Форматирање партиције ће обрисати све постојеће податке. &Mount Point: Si&ze: Fi&le System: Flags: EncryptWidget Form En&crypt system Passphrase Confirm passphrase Please enter the same passphrase in both boxes. FillGlobalStorageJob Set partition information Install %1 on new %2 system partition. Set up new %2 partition with mount point %1. Install %2 on %3 system partition %1. Set up %3 partition %1 with mount point %2. Install boot loader on %1. Setting up mount points. FinishedPage Form &Restart now <h1>All done.</h1> %1 has been installed on your computer. You may now restart into your new system, or continue using the %2 Live environment. FinishedViewStep Finish FormatPartitionJob Format partition %1 (file system: %2, size: %3 MB) on %4. Format %3MB partition %1 with file system %2. Formatting partition %1 with file system %2. The installer failed to format partition %1 on disk '%2'. Could not open device '%1'. Could not open partition table. The installer failed to create file system on partition %1. The installer failed to update partition table on disk '%1'. GroupSelectionWidget Frame group description InteractiveTerminalPage Konsole not installed Please install the kde konsole and try again! Executing script:  <code>%1</code> InteractiveTerminalViewStep Script KeyboardPage Set keyboard model to %1. Set keyboard layout to %1/%2. KeyboardViewStep Keyboard LCLocaleDialog System locale setting The system locale setting affects the language and character set for some command line user interface elements. The current setting is %1. LicensePage Form I accept the terms and conditions above. <h1>License Agreement</h1>This setup procedure will install proprietary software that is subject to licensing terms. Please review the End User License Agreements (EULAs) above. If you do not agree with the terms, the setup procedure cannot continue. <h1>License Agreement</h1>This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. Please review the End User License Agreements (EULAs) above. If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. %1 driver by %2 %1 is an untranslatable product name, example: Creative Audigy driver %1 graphics driver by %2 %1 is usually a vendor name, example: Nvidia graphics driver %1 browser plugin by %2 %1 codec by %2 %1 package by %2 %1 by %2 <a href="%1">view license agreement</a> LicenseViewStep License LocalePage The system language will be set to %1. The numbers and dates locale will be set to %1. Region: Zone: &Change... Set timezone to %1/%2. %1 (%2) Language (Country) LocaleViewStep Loading location data... Location MoveFileSystemJob Move file system of partition %1. Could not open file system on partition %1 for moving. Could not create target for moving file system on partition %1. Moving of partition %1 failed, changes have been rolled back. Moving of partition %1 failed. Roll back of the changes have failed. Updating boot sector after the moving of partition %1 failed. The logical sector sizes in the source and target for copying are not the same. This is currently unsupported. Source and target for copying do not overlap: Rollback is not required. Could not open device %1 to rollback copying. NetInstallPage Network Installation. (Disabled: Unable to fetch package lists, check your network connection) NetInstallViewStep Package selection Page_Keyboard Form Keyboard Model: Type here to test your keyboard Page_UserSetup Form What is your name? What name do you want to use to log in? font-weight: normal If more than one person will use this computer, you can set up multiple accounts after installation. Choose a password to keep your account safe. Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals. What is the name of this computer? This name will be used if you make the computer visible to others on a network. Log in automatically without asking for the password. Use the same password for the administrator account. Choose a password for the administrator account. Enter the same password twice, so that it can be checked for typing errors. PartitionLabelsView Root Home Boot EFI system Swap New partition for %1 New partition %1 %2 PartitionModel Free Space New partition Name File System Mount Point Size PartitionPage Form Storage de&vice: &Revert All Changes New Partition &Table &Create &Edit &Delete Install boot &loader on: Are you sure you want to create a new partition table on %1? PartitionViewStep Gathering system information... Partitions Install %1 alongside another operating system. Erase disk and install %1. Replace a partition with %1. Manual partitioning. Install %1 alongside another operating system on disk %2 (%3). Erase disk %2 (%3) and install %1. Replace a partition on disk %2 (%3) with %1. Manual partitioning on disk %1 (%2). Disk %1 (%2) Current: After: No EFI system partition configured An EFI system partition is necessary to start %1. To configure an EFI system partition, go back and select or create a FAT32 filesystem with the esp flag enabled and mount point %2. You can continue without setting up an EFI system partition but your system may fail to start. EFI system partition flag not set An EFI system partition is necessary to start %1. A partition was configured with mount point %2 but its esp flag is not set. To set the flag, go back and edit the partition. You can continue without setting the flag but your system may fail to start. QObject Default Keyboard Model Default unknown extended unformatted swap Unpartitioned space or unknown partition table ReplaceWidget Form Select where to install %1. Warning: this will delete all files on the selected partition. The selected item does not appear to be a valid partition. %1 cannot be installed on empty space. Please select an existing partition. %1 cannot be installed on an extended partition. Please select an existing primary or logical partition. %1 cannot be installed on this partition. Data partition (%1) Unknown system partition (%1) %1 system partition (%2) %4 The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB. %2 An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. %3 %1 will be installed on %2. Warning: all data on partition %2 will be lost. The EFI system partition at %1 will be used for starting %2. EFI system partition: RequirementsChecker Gathering system information... has at least %1 GB available drive space There is not enough drive space. At least %1 GB is required. has at least %1 GB working memory The system does not have enough working memory. At least %1 GB is required. is plugged in to a power source The system is not plugged in to a power source. is connected to the Internet The system is not connected to the Internet. The installer is not running with administrator rights. ResizeFileSystemJob Resize file system on partition %1. Parted failed to resize filesystem. Failed to resize filesystem. ResizePartitionJob Resize partition %1. Resize %2MB partition %1 to %3MB. Resizing %2MB partition %1 to %3MB. The installer failed to resize partition %1 on disk '%2'. Could not open device '%1'. ScanningDialog Scanning storage devices... Partitioning SetHostNameJob Set hostname %1 Set hostname %1. Setting hostname %1. Internal Error Cannot write hostname to target system SetKeyboardLayoutJob Set keyboard model to %1, layout to %2-%3 Failed to write keyboard configuration for the virtual console. Failed to write to %1 Failed to write keyboard configuration for X11. Failed to write keyboard configuration to existing /etc/default directory. SetPartFlagsJob Set flags on partition %1. Set flags on %1MB %2 partition. Set flags on new partition. Clear flags on partition %1. Clear flags on %1MB %2 partition. Clear flags on new partition. Flag partition %1 as %2. Flag %1MB %2 partition as %3. Flag new partition as %1. Clearing flags on partition %1. Clearing flags on %1MB %2 partition. Clearing flags on new partition. Setting flags %2 on partition %1. Setting flags %3 on %1MB %2 partition. Setting flags %1 on new partition. The installer failed to set flags on partition %1. Could not open device '%1'. Could not open partition table on device '%1'. Could not find partition '%1'. SetPartGeometryJob Update geometry of partition %1. Failed to change the geometry of the partition. SetPasswordJob Set password for user %1 Setting password for user %1. Bad destination system path. rootMountPoint is %1 Cannot set password for user %1. usermod terminated with error code %1. SetTimezoneJob Set timezone to %1/%2 Cannot access selected timezone path. Bad path: %1 Cannot set timezone. Link creation failed, target: %1; link name: %2 Cannot set timezone, Cannot open /etc/timezone for writing SummaryPage This is an overview of what will happen once you start the install procedure. SummaryViewStep Summary UsersPage Your username is too long. Your username contains invalid characters. Only lowercase letters and numbers are allowed. Your hostname is too short. Име вашег "домаћина" - hostname је прекратко. Your hostname is too long. Ваше име домаћина је предуго - hostname Your hostname contains invalid characters. Only letters, numbers and dashes are allowed. Ваше име "домаћина" - hostname садржи недозвољене карактере. Могуће је користити само слова, бројеве и цртице. Your passwords do not match! Лозинке се не поклапају! UsersViewStep Users WelcomePage Form &Language: &Release notes &Known issues &Support &About <h1>Welcome to the %1 installer.</h1> About %1 installer <h1>%1</h1> %2 for %3 Copyright 2014-2015 Teo Mrnjavac <teo@kde.org> Thanks to: Anke Boersma, Aurélien Gâteau, Kevin Kofler, Philip Müller, Pier Luigi Fiorini, Rohan Garg and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>. <a href="http://calamares.io/">Calamares</a> development is sponsored by <a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software. %1 support WelcomeViewStep Welcome