- since the configuration is in the UI parts, we need the widget still
to load the whole configuration (until the config object is complete).
Create the widget before doing configuration; this is wrong. But now
we don't hit nullptr derefs all over.
- make the HostName textbox just a view on the Config's HostName
- make the username and login textboxes view onto Config
- query the Config rather than the UI for job data
- delay construction of the Page (widget) until it's needed
- hand the Config object to the Page on construction
This is prep-work for putting the configuration information into the
Config object, rather than in the UI elements.
- most of the things in utils/ are in the CalamaresUtils namespace,
let Permissions follow suit. Chase the name change in the
*preservefiles* module.
- add an `apply()` function for doing the most basic of chmod.
Note that we don't use `QFile::setPermissions()` because the
**values** used are different (0755 for chmod is 0x755 in the
enum value passed to `setPermissions()`).
On the "Users" tab, the user can choose a username. It was possible to
use 'root' as username, which led to an installation error, because
'root' exists already.
Added a new check to the username validation.
Fixes#1462.
With PR calamares/calamares#1357 the label of the "Manual partitioning" option
was changed, which introduced several downsides:
* The label is shown for UEFI and for BIOS installations.
* The mountpoint of the ESP is and should be distro specific.
* The label always mentioned GPT, which is irrelevant.
* The label should explain, what the option does, and not, what
problems can occur under certain circumstances.
set index in i18n.qml to -1, old settings were just for reading from the bogus model
current model uses strings, so index fails to read from it. This fixes cala crashing on loading i18n.qml
- Expand the documentation, emphasize octal-vs-decimal
- east-const consistently in this file (most of Calamares is west-const)
- shuffle the is-valid bool to the end of the data members,
so sorting by size.
- already had methods for various kinds of broken-up data, but
not one for plain "region/zone" strings; having this makes
it easier for QML to report a zone.
- use the region/zone method from QML, so that clicking on the
world map updates the actual TZ in Config.
- get network status from the global Network object; document that
- get the strings describing the language and LC settings from
the config-object instead of roll-our-own
- use the model of supported locales from Config to populate listboxes
- connect selection of language or LC to the Config object
- remove stray and useless TODOs
- remove unnecessary empty overrides
- clean up includes
- drop all the code that is now in Config
Since the business logic (setting locations, maintaining GS, ...)
is all in the Config object, the ViewStep is remarkably simple:
hook up a UI to the Config, which in the case of QML is done
automatically.
- since the Page hooked up a model and changed the region-selection
**after** connecting to signals, it would reset the location
to Africa/Abijan (alphabetically the first timezone) during
construction. Don't do that.
- this doesn't do the lookup **yet**
- while here, refactor setConfigurationMap so it reads like a story,
with chunks bitten out into a handful of static inline void methods.
- read the *region* and *zone* settings; this duplicates what
the ViewStep does and is currently unused, but ..
- add new support for using the system's TZ (rather than
the fixed values from *region* and *zone*). This complements
GeoIP lookup.
This is the actual feature that started the long rewrite of
the Config object (so that all the business logic would be in
one place, usable for both widgets and QML).
FIXES#1381
- writing *localeConf* settings to GS can be done always when the
formats are set, rather than special-cased. The code
that handles the "special case" of no widget existing for the ViewStep
overlooks the other crashes that happen then.
- Since Config knows what jobs to create, just ask it rather than
keeping a copy.
- allow finer-grained control over whether-or-not to adjust the
timezone in the live system.
- handle some special cases at the point of loading-configuration.
- document the setting in locale.conf
- correct some documentation bugs
- adjust the YAML schema for locale.conf so it's legal YAML syntax
**and** validates the current file.
- since all locale changes need to be entered into GS anyway, this
is something the Config object can do because it is the source
of truth for locale settings.
- drop all the GS settings from the Page.
- remove the weirdly-structured prettyStatus and similar:
the Config object has human-readable status strings (three,
for location, language, and LC-formats) which can be
normal properties with signals.
- Implement prettyStatus in the view step by querying the Config.
- the language and LC settings migrate from page to config
- add API for explicitly setting language (which is then preserved
when clicking new locations)
- since Config knows what settings there are, it should create the
jobs to run later -- not the Page.
- this doesn't work yet, because the Config does **not** know what
the selected timezone is yet.
The Config object wasn't being used at all in the locale module;
reset it to empty and start using it in locale, so that
configuration functionality can be added to it as-needed,
and with the necessary refactoring built-in.
In 022045ae05 a regression was introduced: if no *slideshowAPI*
is specified in the branding file, Calamares refuses to start, with
a YAML failure.
Before the refactoring, we had `YAML::Node doc` and looked up
the *slideshowAPI* in it with `doc["slideshowAPI"]`. After the
refactoring, we had `const YAML::Node& doc`. The `const` makes
all the difference:
- subscripting a non-existent key in a mutable Node silently
returns a Null node (and possibly inserts the key);
- subscripting a non-existent key in a const Node returns an
invalid or undefined node.
Calling IsNull() or IsScalar() on a Null node works: the functions
return a bool. Calling them on an invalid node throws an exception.
So in the **const** case, this code can throws an exception that it
doesn't in the non-const case:
`doc[ "slideshowAPI" ].IsScalar()`
- Massage the code to check for validity before checking for scalar
- Add a `get()` that produces more useful exception types when
looking up an invalid key
- Use `get()` to lookup the slideshow node just once.
- previously, the first column (name) was sized to show the
names **that were visible at startup**, which fails when
there are long names hidden in groups that are not expanded
immediately.
- change the columns to resize according to the contents; this makes
the descriptions jump to the right as the name column gets wider.
FIXES#1448
- there are no consumers for checking-the-capacity-of-the-drive
This parameter was introduced in 3cd18fd285 as "preparatory work"
but never completed. The architecture of the PartitionCoreModule
makes it very difficult to get the necessary parameters to
the right place, and it would probably be better to put
a SortFilterProxyModel in front of a partitioning model anyway.
Since the display code can already filter on size, just drop this one.
- make the rectangles slightly larger
- align text to center of the rectangle
- make the rectangle fill out the column; without this, the
width would collapse back to 0 after a change in the model,
which would draw 0-width rectangles.
FIXES#1453
- continuations, for the console, no longer print the date + level,
which makes things easier to visually group and read.
- the file log is mostly unchanged, except it contains more spaces now.
- fix the schema so the schema is valid json-schema
- the schema doesn't actually validate the *operations* yet
- sort the named backends (needs a double-check that the
list covers all the ones we currently support)
SEE #1441
- Don't do in code what is already done in the designer (.ui) file
- setFrameStyle() is difficult because it mixes different enums
into an int, which causes the warning from clang.
- Add access to the panel-sides membe of the view manager, and
calculate which sides are populated by panels (if any).
- Pass the calculated panel-sides to the view manager before it
starts adding viewpages, so they get consistent margins.
- Give classes a virtual destructor that need them
- Remove spurious ;
- Refactor addJobs() because that doesn't need to be in a class
- Remove redundant intermediate base-classes
- Some variant helpers take a default parameter if the map does not
contains the given key or if the type mismatches. Make all helpers
behave the same.
- Initialize the attribute partAttributes to 0; it is a primitive type
and it is not initialized in some constructors.
Fixes commit c1b5426c6 ([partition] Add support for partition attributes).
- Move implementation of default constructor to cpp.
added missing components listed as ResponsiveBase, ListItemDelegate & ListViewTemplate
parts of which were on nitrux
keyboard.qml no longer uses buttons within ListView, can't work as buttons and have them visible
see https://doc.qt.io/qt-5/qml-qtquick-listview.html#footerPositioning-prop
set ListView as actually visible within a normal calamares window size
- If the 'no tracking' box is checked, then the way to uncheck
it is to tick some **other** box.
- It doesn't make sense to unselect 'none' and then have .. none
selected.
KDE neon does not do this kind of tracking -- although it was originally
requested by KDE neon, no server roll-out was done once the
privacy policy was thought out.
- give the on-some-checkbox-state-changed slots better names
- while here, refactor is-any-actual-tracking-option-checked
- improve other debug messages, to be a whole sentence
- QString to-integer members detect if an integer string begins with
"0x" (base 16) or "0", base 8; but QVariant members do not.
- QString: the C language convention is used is base is set to 0.
- Convert to QString and use its member toLongLong() and set base to 0
to detect integer strings begin with a prefix.
- These have **not** been fixed for validation, so the schema's themselves
will fail to load. This is a consequence of variations in JSON-Schema
representations through various drafts. Fixing the schemata is
fairly straightforward.
This gives us 19 new tests, all of which fail.
- Note that this is missing *languageIcon* so if that gets uncommented,
it will fail validation.
- While here decide that should be
right up front in object (mappings) declaration.
- The size of a 2GiB partition (in bytes) is larger than the largest
32-bit signed integer; we hit signed overflow while calculating
2^11 * 2^10 * 2^10 and the test fails.
- Switch the whole table of sizes to qint64 instead.
- For testing purposes only, introduce a _qi suffix for qint64.
FIXES#1430
- All the headers go to relevant subdirs, but we don't keep
libcalamares and libcalamaresui apart.
- While here, remove unused variable from libcalamares CMake
- link the library privately -- the public API uses QVariantMap
- install FindYAMLCPP just in case
- add yamlcpp explicitly in the few places that really need it
(e.g. netinstall testing the parsing of netinstall.yaml)
- Add the Calamares CMake-modules to the search path automatically
- Export to CalamaresTargets.cmake and use namespace Calamares::
- Document imported targets
- Find Qt, because the translations machinery will need macros from that
- The installed lib links to IMPORTED libraries from KF5, so we need
to find them (again) as well.
- Do all the status indication in one component, but vary
the top-level message based on whether the mandatory
requirements are satisfied.
- Vary color and icon based on each requirement's *mandatory* setting.
- Value is configurable (through the "selector" which is passed
to GeoIP lookups). This is convenient for tests so you can "fix"
the value that the lookup will return.
- The Radio's are replaced by CheckBoxes and some logic, so
that different tracking styles can be enabled independently.
None of the settings end up in the Config yet, though.
- Uses global storage to steer the jobs that are created, in case
the slideshow needs to be tweaked by percentages or whatever.
- While here, add some code docs and apply coding style.
- When loading QML V2, both loadQmlV2Complete() and changeSlideShowState()
lock the same mutex, introduced in e7f4479df1.
- Explicitly unlock when loading is done and we need to change the state
immediately.
- For testing purposes, it's useful to load a module externally
and then register it to the ModuleManager (this hands off ownership).
- Refactor overall module loading to use the exposed single-module method.
- QML files need to be searched in specific places; this was initialized
by Calamares, but not for the text application. Move initialization
into the library.
- fixes:
12:44:25 [6]: Python Error:
<class 'TypeError'>
'builtin_function_or_method' object is not subscriptable
File "/usr/lib/calamares/modules/rawfs/main.py", line 188, in run
item.copy(filesystems.index(item), len(filesystems))
File "/usr/lib/calamares/modules/rawfs/main.py", line 99, in copy
if libcalamares.job.configuration["bogus"]:
- The -s will run the slideshow with a bogus job-queue, allowing easier
testing of the slideshow. This is more convenient than having a Calamares
with an empty show and a bogus exec section.
- The -s option for running the slideshow / execution phase of
Calamares needs to create a bogus Module for the ExecutionViewStep.
- Previously, unless setDefaultFontSize() was called explicitly,
the default size would be 0, leading to unexpected and weird
displays (and a warning on stderr).
- If setDefaultFontSize() is not called, get a sensible size instead
(like defaultFontHeight() was already trying to do).
- When loading *view* modules, we always need a QApplication for GUI
bits, because the widget for a module is created is very early.
- If it's a view module, replace the application object with one
that supports GUIs; without the --ui flag, though, it will just
run the jobs.
- All the configuration lives in the Config object (or the
tracking objects that it exposes).
- Get data from the config object for the jobs; TODO: give the
jobs a less-clunky interface.
The UI isn't hooked up to the Config object yet, though.
- a single tracking type can be enabled for configuration in the
config file; each must have a policy URL. Class TrackingStyleConfig
is a base class for that kind of configuration.
- root_mount_point was used initially for logging c1a139995 (adding new
bootloader job options are to use grub for BIOS, gummiboot for efi set
extra mountpoint when efi is found)
- the trace was removed since 533031b3c ([bootloader] print() does not
log)
- The Python configuration tests sometimes need extra setup, so
do that through a CMakeTests.txt file in the test directory.
- Patch up existing tests:
- grubcfg needs /tmp/calamares/etc/default to exist
- rawfs won't work on FreeBSD because of differences in /proc
- drop the *discard* from filesystems-on-SSD in the standard example
configuration.
- keep the table **with** *discard* around for referece and explanation.
Remember that the example configurations are intended as **examples**,
to document available settings, and do not reflect a sensible
production configuration.
FIXES#1395
clean up obsolete lines in welcomeq.qml
add requirement section from welcome.conf to welcomeq.conf
data shows correctly in Recommended.qml, fails to show any in Requirements.qml if run without admin rights
This makes it possible to remove QML from Calamares, possibly yielding
a smaller, lighter installer; it takes with it the nice slideshow,
modern configurable navigation and the QML UIs built for various modules.
By default, WITH_QML is on and the "normal" feature set is retained.
- look for Qml modules only when WITH_QML is on (the default)
- look for Network, since that's pulled in only implicitly
- disable the QML Calamares models (modules/*q) if no QML is
enabled; longer-term plan is to merge the **pages** back to
the "upstream" modules, and have things be run-time switchable,
but that's not here yet. Also disable the notesqml module when
QML is off.
- reminder to make all the ABI-relevant WITH_* settings available as #defines
- move the compilation of KDSAG to the calamares executable, not the library
- when DBus activation is on, drop all of kdsingleapplicationguard
- It is the requirements model (checking) that reports progress, and now
the model is accessible (ask for it with requirementsModel(), make the
messages come from there.
- The architecture of letting someone build up a list of requirements
from data emitted by the ModuleManager is broken: if it gets loaded
later, it will miss data; passing around complicated objects is
no fun anyway. Get rid of it, on the way to "ModuleManager has
its own model of requirements".
- Give the ModuleManager a RequirementsModel -- that is the source
of truth about the module-requirements of the modules managed
by that particular ModuleManager.
- Let the RequirementsChecker operate on a given RequirementsModel.
- The requirements are collected by ModuleManager, checked
by an internal RequirementsChecker and changes to the
requirements state are all signalled from ModuleManager.
By connecting the requirements in the welcome modules' Config
only to their own configs -- and immediately checking them,
which is bad on its own -- we end up with a disconnect between
what the ModuleManager says about requirements, and what
the welcome modules report on.
Doesn't compile (but I need to get it off this machine)
- Prepare to implement a picture-based slideshow alongside QML
- Split QML loading into the slideshow component
This might be good prep-work for moving QML loading out of the QMLViewStep as well.
fully implemented:
* loading of a live map, ESRI based, zooming & dragging possible
* IP address is translated to map coordinates
* loading of the map centers to the obtained coordinates, with a marker set
* coordinates are translated to a timezone, label visible at bottom of the map
* mouse movement will show changing coordinates
* clicking on new location will center map there, marker moved too, timezone label adjusted
* hasInternet switch set to either load Map.qml or Offline.qml
not done:
* get hasInternet status
* fill the fine-tune 181n.qml with proper locale & language data
* connect the obtained timezone to globalstorage
comments are left in the various files for what needs attention/changes
Improve testing framework while adding tests to rawfs to double-
check that the conversion (for Python 3.3 compatibility) of
capture_output is correct.
- If a module has tests/#.global or tests/#.job, these are used
as arguments to a test-run of loadmodule (which reads them
and runs the module with that configuration).
- This makes the old python-loading test and test-runner entirely
obsolete, so remove them too.
- By default, try to use DBus service to keep Calamares unique
- The older implementation via KDSingleApplicationGuard is still
available, just not used by default.
- Calamares doesn't like to run multiple instances, since they would
interfere with each other (stealing disks from each other, for instance).
The single-application code tries to prevent that.
- For -d runs, for developers where presumably they know what they are
doing, the single-application restriction is annoying: especially if
you need two instances at once for some kind of visual comparison.
Drop the single-app requirement if -d is given.
- If the QML navigation panel sets a height, use that
- If it doesn't, use 48px (which *may* make sense, but like many
screen dimensions in Calamares doesn't take HiDPI into account)
- Give the demo QML an explicit height of 48
- This code has existed for a long time but never stored anything
to the Branding object, and the most literal slideshow (just some
images) was not implemented.
Region "Africa" zones # 52
14:25:19 [6]: .. Zone "Asmara" QPoint(445,183)
14:25:19 [6]: .. First zone found 2 "2.0"
14:25:19 [6]: .. Also in zone 3 "3.0"
- All failures were being reported as Timeout, which is confusing
when they are not. Introduce HttpError for the not-timeout
other kinds of errors.
- Add operator<< for RequestStatus for nicer error logging.
- The Config object can handle GeoIP loading on its own. Both
View steps that used this had a derpy view->setCountry() that
didn't really do anything with the view anymore.
- This forces the EFI firmware to boot the loader that was just
created, whatever the boot order set in the firmware setup (USB,
CD/DVD, HD...).
- It is safe to use the first Boot Entry listed in BootOrder as the
previous command creates the new entry and adds it to the first place
of the BootOrder.
- This is a good example of being overly clever in C++
- the whole API with an enum requesting a specific string is a bit weird,
although it makes sense from the 'might need more strings specified'
point of view.
- sometimes if you use external OEM modules you might have those lines already present
- by skipping them you won't have double lines when rerun the module in a later step
Merge in the documentation from Bill Auger and then implement
what it documents (this had been missing; productWallpaper was
an orphan setting).
FIXES#1380
- If we have a wallpaper, bung in an extra QWidget between the main
window and the panels (sidebar, nav and main) where we set a
stylesheet that displays the chosen image.
- things that can be done in the designer file should be there,
not weirdly repeated in code elsewhere
- drop the insertion of an extra spacer (why not include it in the
designer file?)
- shuffle all the connect() calls down to the end of the constructor
This commit adds the new configuration `efiSystemPartitionName` to the
file partition.conf.
This option sets the partition name to the EFI System Partition that is
created. If this option is unset, the partition is left unnamed.
- Use << Logger::NoQuote{} to turn off quoting **and** the space
- In practice, in Calamares we use this only around other processes'
output, where we want neither quotes nor spaces.
- the test checks that the default locale is C or en_US .. let's just
make it so instead of relying on the environment. This fixes tests
on my dev-laptop, which happens to be set to en_NL (with volapuk
date format).
- Although we long ago replaced the getPartitions implementation, the
test is still there, and on a machine with no /dev/sda (e.g. because
root is on nvme) the echo-awk-shell-pipeline can give an empty string;
this is turned into a QStringList{""} which has one element, while
the new version has 0 elements.
- Special-case the test that empty strings should be empty lists, rather
than 1-element lists with an empty element.
reads data from languagesModel correctly, debug added to see index changes
code cleanup
button layout improved
install info text added, better spacing of text
about button no longer commented out, 3 reasons:
- info provided by any about is standard, will be odd if it can't be found
- about.qml is a seperate file, can be completely adjusted
- not showing it takes away the options for new QML cala users to see what is possible with Loader, thus stopping new possible contributors
- This is a follow-up to d0c205c1cc6a2ae49935c92bfd52911b9a0d43f7;
I really don't know why static constexpr const elements that are
not referenced by address need to be defined separately.
- rename enlarge to ensureSize() and change the meaning from
"make this much bigger" to "make sure this is displayed",
which is easier on the caller to calculate.
- the navigation bar was set "too tall", leave it at the natural
layout height for this widget
- margins needed some massaging to give contents some more space
(contents has a margin, so it doesn't need more space above
the navigation bar)
- This isn't something that Calamares can acutally fix,
so the test will be disabled later. After all, if
Brazzaville and Kinshasa are close enough that on the
map they are the same pixel, we can't move the cities.
- Merge all the format documentation into netinstall.conf,
where the example is given in full as an embedded
*groups* entry.
- Get README.md to point to the example.
- Fix up headers in netinstall.yaml, pointing to the
embedded example in netinstall.conf.
Timezones updated for these countries found on pixel detection tool
Dublin is in 0 (-1 needs editing)
Gibraltar should be 1.0 (0 needs editing)
Guernsey and Jersey are in 0 (1.0 needs editing)
Lisbon is in 0 (-1 needs editing)
Vilnius should be in 2 (1 needs editing)
- QImage needs Qt5::Gui, so this isn't a guiless-test; it can use
the offscreen QPA, though.
- Check that the images are all the same size
- Debugging / check code removed from timezonewidget
- The idea is to check all the TZ images for consistency, like
TimeZoneWidget::setCurrentLocation() does when DEBUG_TIMEZONES is
on; a zone-pixel should be set in only **one** image.
The test so far is just a stub.
- Make all four DEBUG_ flags actual CMake options, rather than
stuffing some of them in the rather-peculiar _enable_debug_flags.
Each debug option turns on suitable compile flags in the module(s)
that are affected.
- When writing YAML, given a float **always** write
some decimal digits (e.g. "1.0" rather than "1")
so that the type of the written-out thing stays
float.
- Avoids test failure with the sample `welcome.conf`
file which reads 1.0 and would write out 1, which then
led to type differences.
- Handle qlonglong explicitly
- Add a fallbackfor things that convert to qulonglong, to
avoid these remaining integer types from hitting the
very end of the if-chain, and being written out as
the **string** "<typename>"
When one of these common names for the netinstall page is used,
it gets pulled out of the standard translations, so that it
doesn't have to be translated in the per-distro config file.
These labels are common enough that they make sense for
everyone to have lying around.
FIXES#1367
(I say "fixed" but of course it's going to depend on the translation
workflow to make these available)
- In production, cDebug() might not show up, so the log will not
contain the lines saying what program is being run;
- Errors should at least mention the program name, but "env" or
"chroot" is not useful, so pull that from *args*, which is
the command we actually want to run.
- an empty command isn't going to work (although it might successfully
run chroot or env in the target system, that's not useful)
- while here, move variable declarations closer to their use.
- Slice overall progress into chunks, with each chunk of equal size
(as long as we have no overall count information) and place
the progress of the current chunk into its own slice.
- The entry knows where it should be mounted, and can remember that
- mount_entry() didn't use self, so made no sense as a method
of the Operation class
probably due to dynamically loading items
regionModel now lists, zonesModel only lists one delegate, but
working on QML modules can now continue without crashing cala
This doesn't actually **work** though, the QML uses older Calamares-internal
APIs and uses a ResponsiveBase that we don't have. Merge it mostly for
the Config and model changes.
FIXES#1355
- Add some extra checks for validity of m_currentStep (an index)
- Start off with explicitly invalid index, and keep it so until
loading is complete; this prevents the situation where quit-at-end
gets triggered after loading the very first module.
- io.calamares.modules doesn't exist
- ResponsiveBase doesn't exist
The module is now non-functional, but at least it loads and renders
a list of regions and zones.
- name default / example QML conventionally
- copy QRC from keyboard -- the QML needs to be included in the QRC --
since we don't want to have the QML in the keyboard module.
- follow branding settings, taking the panel-sides into account
- drop fixed width and height for QML parts
- give panels a minimum appropriate-dimension if they don't have one
This allows, for instance, putting both Widget sidebar and QML navigation
on the left-hand side of the window.
- Introduce an enum for panel-side
- Expose this to QML -- I can imagine that QML panels need to know
which side of the Calamares window they're on.
- Refactor loading the setting into a method that handles both
flavor and side
- There's no real reason to force the sidebar left and nav at the bottom,
certainly with QML supporting more layouts and being more flexible,
so document a mechanism to place the sidebar and navigation along
"edges" of the Calamares window.
- With an empty list, the question is meaningless
- .. and we called this with an empty list while constructing the
ViewManager; if quit-at-end is true, then this would terminate
Calamares immediately because the list was at the end.
- put signals in conventional place
- remove const int& parameter, that can just be int
- drop oddly-guarded code (that leaks memory); if the index (row)
being passed in, it's probably best to just crash
- remove unused signal warningMessageChanged
