diff --git a/.github/workflows/nightly-debian.yml b/.github/workflows/nightly-debian.yml index a5ace8e95..eb96fe40e 100644 --- a/.github/workflows/nightly-debian.yml +++ b/.github/workflows/nightly-debian.yml @@ -21,7 +21,9 @@ jobs: steps: - name: "prepare git" shell: bash - run: apt-get -y install git-core jq curl + run: | + apt-get update + apt-get -y install git-core jq curl - name: "prepare source" uses: calamares/actions/generic-checkout@v5 - name: "install dependencies" diff --git a/ci/deps-debian11.sh b/ci/deps-debian11.sh index 505266f54..bcd776e65 100644 --- a/ci/deps-debian11.sh +++ b/ci/deps-debian11.sh @@ -3,7 +3,6 @@ # Install dependencies for the nightly-debian (11) build # apt-get update -# Make sure we can send notices later apt-get -y install git-core jq curl apt-get -y install \ build-essential \ diff --git a/lang/calamares_en.ts b/lang/calamares_en.ts index 2ae50108d..cd51a3dff 100644 --- a/lang/calamares_en.ts +++ b/lang/calamares_en.ts @@ -10,11 +10,16 @@ - Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://app.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software. + Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://app.transifex.com/calamares/calamares/">Calamares translators team</a>. - + + <a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software. + + + + Copyright %1-%2 %3 &lt;%4&gt;<br/> Copyright year-year Name <email-address> Copyright %1-%2 %3 &lt;%4&gt;<br/> @@ -31,17 +36,17 @@ BootInfoWidget - + The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode. The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode. - + This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own. - + This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own. @@ -165,12 +170,12 @@ - + Set up Set up - + Install Install @@ -207,17 +212,17 @@ Calamares::ProcessJob - + Run command '%1' in target system. Run command '%1' in target system. - + Run command '%1'. Run command '%1'. - + Running command %1 %2 Running command %1 %2 @@ -258,17 +263,17 @@ Calamares::QmlViewStep - + Loading ... Loading ... - + QML Step <i>%1</i>. QML Step <i>%1</i>. - + Loading failed. Loading failed. @@ -276,12 +281,12 @@ Calamares::RequirementsChecker - + Requirements checking for module '%1' is complete. - + Waiting for %n module(s). Waiting for %n module. @@ -289,7 +294,7 @@ - + (%n second(s)) (%n second) @@ -297,7 +302,7 @@ - + System-requirements checking is complete. System-requirements checking is complete. @@ -305,17 +310,17 @@ Calamares::ViewManager - + Setup Failed Setup Failed - + Installation Failed Installation Failed - + Error Error @@ -335,17 +340,17 @@ &Close - + Install Log Paste URL Install Log Paste URL - + The upload was unsuccessful. No web-paste was done. The upload was unsuccessful. No web-paste was done. - + Install log posted to %1 @@ -358,124 +363,124 @@ Link copied to clipboard Link copied to clipboard - + Calamares Initialization Failed Calamares Initialization Failed - + %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution. %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution. - + <br/>The following modules could not be loaded: <br/>The following modules could not be loaded: - + Continue with setup? Continue with setup? - + Continue with installation? Continue with installation? - + The %1 setup program is about to make changes to your disk in order to set up %2.<br/><strong>You will not be able to undo these changes.</strong> The %1 setup program is about to make changes to your disk in order to set up %2.<br/><strong>You will not be able to undo these changes.</strong> - + The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong> The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong> - + &Set up now &Set up now - + &Install now &Install now - + Go &back Go &back - + &Set up &Set up - + &Install &Install - + Setup is complete. Close the setup program. Setup is complete. Close the setup program. - + The installation is complete. Close the installer. The installation is complete. Close the installer. - + Cancel setup without changing the system. Cancel setup without changing the system. - + Cancel installation without changing the system. Cancel installation without changing the system. - + &Next &Next - + &Back &Back - + &Done &Done - + &Cancel &Cancel - + Cancel setup? Cancel setup? - + Cancel installation? Cancel installation? - + Do you really want to cancel the current setup process? The setup program will quit and all changes will be lost. Do you really want to cancel the current setup process? The setup program will quit and all changes will be lost. - + Do you really want to cancel the current install process? The installer will quit and all changes will be lost. Do you really want to cancel the current install process? @@ -485,22 +490,22 @@ The installer will quit and all changes will be lost. CalamaresPython::Helper - + Unknown exception type Unknown exception type - + unparseable Python error unparseable Python error - + unparseable Python traceback unparseable Python traceback - + Unfetchable Python error. Unfetchable Python error. @@ -508,12 +513,12 @@ The installer will quit and all changes will be lost. CalamaresWindow - + %1 Setup Program %1 Setup Program - + %1 Installer %1 Installer @@ -548,149 +553,149 @@ The installer will quit and all changes will be lost. ChoicePage - + Select storage de&vice: Select storage de&vice: - - - - + + + + Current: Current: - + After: After: - + <strong>Manual partitioning</strong><br/>You can create or resize partitions yourself. <strong>Manual partitioning</strong><br/>You can create or resize partitions yourself. - + Reuse %1 as home partition for %2. Reuse %1 as home partition for %2. - + <strong>Select a partition to shrink, then drag the bottom bar to resize</strong> <strong>Select a partition to shrink, then drag the bottom bar to resize</strong> - + %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4. %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4. - + Boot loader location: Boot loader location: - + <strong>Select a partition to install on</strong> <strong>Select a partition to install on</strong> - + An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1. - + The EFI system partition at %1 will be used for starting %2. The EFI system partition at %1 will be used for starting %2. - + EFI system partition: EFI system partition: - + This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. - - - - + + + + <strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device. <strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device. - - - - + + + + <strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1. <strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1. - - - - + + + + <strong>Replace a partition</strong><br/>Replaces a partition with %1. <strong>Replace a partition</strong><br/>Replaces a partition with %1. - + This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. - + This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. - + This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device. - + This storage device already has an operating system on it, but the partition table <strong>%1</strong> is different from the needed <strong>%2</strong>.<br/> This storage device already has an operating system on it, but the partition table <strong>%1</strong> is different from the needed <strong>%2</strong>.<br/> - + This storage device has one of its partitions <strong>mounted</strong>. This storage device has one of its partitions <strong>mounted</strong>. - + This storage device is a part of an <strong>inactive RAID</strong> device. This storage device is a part of an <strong>inactive RAID</strong> device. - + No Swap No Swap - + Reuse Swap Reuse Swap - + Swap (no Hibernate) Swap (no Hibernate) - + Swap (with Hibernate) Swap (with Hibernate) - + Swap to file Swap to file @@ -759,12 +764,12 @@ The installer will quit and all changes will be lost. CommandList - + Could not run command. Could not run command. - + The commands use variables that are not defined. Missing variables are: %1. @@ -772,12 +777,12 @@ The installer will quit and all changes will be lost. Config - + Set keyboard model to %1.<br/> Set keyboard model to %1.<br/> - + Set keyboard layout to %1/%2. Set keyboard layout to %1/%2. @@ -787,12 +792,12 @@ The installer will quit and all changes will be lost. Set timezone to %1/%2. - + The system language will be set to %1. The system language will be set to %1. - + The numbers and dates locale will be set to %1. The numbers and dates locale will be set to %1. @@ -817,7 +822,7 @@ The installer will quit and all changes will be lost. Network Installation. (Disabled: No package list) - + Package selection Package selection @@ -827,47 +832,47 @@ The installer will quit and all changes will be lost. Network Installation. (Disabled: Unable to fetch package lists, check your network connection) - + This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. - + This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. - + This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled. This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled. - + This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled. This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled. - + This program will ask you some questions and set up %2 on your computer. This program will ask you some questions and set up %2 on your computer. - + <h1>Welcome to the Calamares setup program for %1</h1> <h1>Welcome to the Calamares setup program for %1</h1> - + <h1>Welcome to %1 setup</h1> <h1>Welcome to %1 setup</h1> - + <h1>Welcome to the Calamares installer for %1</h1> <h1>Welcome to the Calamares installer for %1</h1> - + <h1>Welcome to the %1 installer</h1> <h1>Welcome to the %1 installer</h1> @@ -912,52 +917,52 @@ The installer will quit and all changes will be lost. Only letters, numbers, underscore and hyphen are allowed. - + Your passwords do not match! Your passwords do not match! - + OK! OK! - + Setup Failed Setup Failed - + Installation Failed Installation Failed - + The setup of %1 did not complete successfully. The setup of %1 did not complete successfully. - + The installation of %1 did not complete successfully. The installation of %1 did not complete successfully. - + Setup Complete Setup Complete - + Installation Complete Installation Complete - + The setup of %1 is complete. The setup of %1 is complete. - + The installation of %1 is complete. The installation of %1 is complete. @@ -972,17 +977,17 @@ The installer will quit and all changes will be lost. Please pick a product from the list. The selected product will be installed. - + Packages Packages - + Install option: <strong>%1</strong> Install option: <strong>%1</strong> - + None None @@ -1005,7 +1010,7 @@ The installer will quit and all changes will be lost. ContextualProcessJob - + Contextual Processes Job Contextual Processes Job @@ -1106,43 +1111,43 @@ The installer will quit and all changes will be lost. CreatePartitionJob - + Create new %1MiB partition on %3 (%2) with entries %4. Create new %1MiB partition on %3 (%2) with entries %4. - + Create new %1MiB partition on %3 (%2). Create new %1MiB partition on %3 (%2). - + Create new %2MiB partition on %4 (%3) with file system %1. Create new %2MiB partition on %4 (%3) with file system %1. - + Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2) with entries <em>%4</em>. Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2) with entries <em>%4</em>. - + Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2). Create new <strong>%1MiB</strong> partition on <strong>%3</strong> (%2). - + Create new <strong>%2MiB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>. Create new <strong>%2MiB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>. - - + + Creating new %1 partition on %2. Creating new %1 partition on %2. - + The installer failed to create partition on disk '%1'. The installer failed to create partition on disk '%1'. @@ -1188,12 +1193,12 @@ The installer will quit and all changes will be lost. Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3). - + Creating new %1 partition table on %2. Creating new %1 partition table on %2. - + The installer failed to create a partition table on %1. The installer failed to create a partition table on %1. @@ -1201,33 +1206,33 @@ The installer will quit and all changes will be lost. CreateUserJob - + Create user %1 Create user %1 - + Create user <strong>%1</strong>. Create user <strong>%1</strong>. - + Preserving home directory Preserving home directory - - + + Creating user %1 Creating user %1 - + Configuring user %1 Configuring user %1 - + Setting file permissions Setting file permissions @@ -1290,17 +1295,17 @@ The installer will quit and all changes will be lost. Delete partition %1. - + Delete partition <strong>%1</strong>. Delete partition <strong>%1</strong>. - + Deleting partition %1. Deleting partition %1. - + The installer failed to delete partition %1. The installer failed to delete partition %1. @@ -1308,32 +1313,32 @@ The installer will quit and all changes will be lost. DeviceInfoWidget - + This device has a <strong>%1</strong> partition table. This device has a <strong>%1</strong> partition table. - + This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem. - + This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page. This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page. - + <br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment. <br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment. - + <br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions. <br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions. - + The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred. The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred. @@ -1374,7 +1379,7 @@ The installer will quit and all changes will be lost. DummyCppJob - + Dummy C++ Job Dummy C++ Job @@ -1475,13 +1480,13 @@ The installer will quit and all changes will be lost. Confirm passphrase - - + + Please enter the same passphrase in both boxes. Please enter the same passphrase in both boxes. - + Password must be a minimum of %1 characters @@ -1502,57 +1507,57 @@ The installer will quit and all changes will be lost. FillGlobalStorageJob - + Set partition information Set partition information - + Install %1 on <strong>new</strong> %2 system partition with features <em>%3</em> Install %1 on <strong>new</strong> %2 system partition with features <em>%3</em> - + Install %1 on <strong>new</strong> %2 system partition. Install %1 on <strong>new</strong> %2 system partition. - + Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong> and features <em>%3</em>. Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong> and features <em>%3</em>. - + Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>%3. Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>%3. - + Install %2 on %3 system partition <strong>%1</strong> with features <em>%4</em>. Install %2 on %3 system partition <strong>%1</strong> with features <em>%4</em>. - + Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong> and features <em>%4</em>. Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong> and features <em>%4</em>. - + Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>%4. Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>%4. - + Install %2 on %3 system partition <strong>%1</strong>. Install %2 on %3 system partition <strong>%1</strong>. - + Install boot loader on <strong>%1</strong>. Install boot loader on <strong>%1</strong>. - + Setting up mount points. Setting up mount points. @@ -1619,23 +1624,23 @@ The installer will quit and all changes will be lost. Format partition %1 (file system: %2, size: %3 MiB) on %4. - + Format <strong>%3MiB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>. Format <strong>%3MiB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>. - + %1 (%2) partition label %1 (device path %2) %1 (%2) - + Formatting partition %1 with file system %2. Formatting partition %1 with file system %2. - + The installer failed to format partition %1 on disk '%2'. The installer failed to format partition %1 on disk '%2'. @@ -1643,127 +1648,127 @@ The installer will quit and all changes will be lost. GeneralRequirements - + Please ensure the system has at least %1 GiB available drive space. - + Available drive space is all of the hard disks and SSDs connected to the system. - + There is not enough drive space. At least %1 GiB is required. There is not enough drive space. At least %1 GiB is required. - + has at least %1 GiB working memory has at least %1 GiB working memory - + The system does not have enough working memory. At least %1 GiB is required. The system does not have enough working memory. At least %1 GiB is required. - + is plugged in to a power source is plugged in to a power source - + The system is not plugged in to a power source. The system is not plugged in to a power source. - + is connected to the Internet is connected to the Internet - + The system is not connected to the Internet. The system is not connected to the Internet. - + is running the installer as an administrator (root) is running the installer as an administrator (root) - + The setup program is not running with administrator rights. The setup program is not running with administrator rights. - + The installer is not running with administrator rights. The installer is not running with administrator rights. - + has a screen large enough to show the whole installer has a screen large enough to show the whole installer - + The screen is too small to display the setup program. The screen is too small to display the setup program. - + The screen is too small to display the installer. The screen is too small to display the installer. - + is always false - + The computer says no. - + is always false (slowly) - + The computer says no (slowly). - + is always true - + The computer says yes. - + is always true (slowly) - + The computer says yes (slowly). - + is checked three times. - + The snark has not been checked three times. The (some mythological beast) has not been checked three times. @@ -1772,7 +1777,7 @@ The installer will quit and all changes will be lost. HostInfoJob - + Collecting information about your machine. Collecting information about your machine. @@ -1806,7 +1811,7 @@ The installer will quit and all changes will be lost. InitcpioJob - + Creating initramfs with mkinitcpio. Creating initramfs with mkinitcpio. @@ -1814,7 +1819,7 @@ The installer will quit and all changes will be lost. InitramfsJob - + Creating initramfs. Creating initramfs. @@ -1822,17 +1827,17 @@ The installer will quit and all changes will be lost. InteractiveTerminalPage - + Konsole not installed Konsole not installed - + Please install KDE Konsole and try again! Please install KDE Konsole and try again! - + Executing script: &nbsp;<code>%1</code> Executing script: &nbsp;<code>%1</code> @@ -1840,7 +1845,7 @@ The installer will quit and all changes will be lost. InteractiveTerminalViewStep - + Script Script @@ -1856,7 +1861,7 @@ The installer will quit and all changes will be lost. KeyboardViewStep - + Keyboard Keyboard @@ -1887,22 +1892,22 @@ The installer will quit and all changes will be lost. LOSHJob - + Configuring encrypted swap. Configuring encrypted swap. - + No target system available. No target system available. - + No rootMountPoint is set. No rootMountPoint is set. - + No configFilePath is set. No configFilePath is set. @@ -1915,32 +1920,32 @@ The installer will quit and all changes will be lost. <h1>License Agreement</h1> - + I accept the terms and conditions above. I accept the terms and conditions above. - + Please review the End User License Agreements (EULAs). Please review the End User License Agreements (EULAs). - + This setup procedure will install proprietary software that is subject to licensing terms. This setup procedure will install proprietary software that is subject to licensing terms. - + If you do not agree with the terms, the setup procedure cannot continue. If you do not agree with the terms, the setup procedure cannot continue. - + This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience. - + If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead. @@ -1948,7 +1953,7 @@ The installer will quit and all changes will be lost. LicenseViewStep - + License License @@ -2043,7 +2048,7 @@ The installer will quit and all changes will be lost. LocaleTests - + Quit Quit @@ -2051,7 +2056,7 @@ The installer will quit and all changes will be lost. LocaleViewStep - + Location Location @@ -2089,17 +2094,17 @@ The installer will quit and all changes will be lost. MachineIdJob - + Generate machine-id. Generate machine-id. - + Configuration Error Configuration Error - + No root mount point is set for MachineId. No root mount point is set for MachineId. @@ -2260,12 +2265,12 @@ The installer will quit and all changes will be lost. OEMViewStep - + OEM Configuration OEM Configuration - + Set the OEM Batch Identifier to <code>%1</code>. Set the OEM Batch Identifier to <code>%1</code>. @@ -2303,77 +2308,77 @@ The installer will quit and all changes will be lost. PWQ - + Password is too short Password is too short - + Password is too long Password is too long - + Password is too weak Password is too weak - + Memory allocation error when setting '%1' Memory allocation error when setting '%1' - + Memory allocation error Memory allocation error - + The password is the same as the old one The password is the same as the old one - + The password is a palindrome The password is a palindrome - + The password differs with case changes only The password differs with case changes only - + The password is too similar to the old one The password is too similar to the old one - + The password contains the user name in some form The password contains the user name in some form - + The password contains words from the real name of the user in some form The password contains words from the real name of the user in some form - + The password contains forbidden words in some form The password contains forbidden words in some form - + The password contains too few digits The password contains too few digits - + The password contains too few uppercase letters The password contains too few uppercase letters - + The password contains fewer than %n lowercase letters The password contains fewer than %n lowercase letters @@ -2381,37 +2386,37 @@ The installer will quit and all changes will be lost. - + The password contains too few lowercase letters The password contains too few lowercase letters - + The password contains too few non-alphanumeric characters The password contains too few non-alphanumeric characters - + The password is too short The password is too short - + The password does not contain enough character classes The password does not contain enough character classes - + The password contains too many same characters consecutively The password contains too many same characters consecutively - + The password contains too many characters of the same class consecutively The password contains too many characters of the same class consecutively - + The password contains fewer than %n digits The password contains fewer than %n digits @@ -2419,7 +2424,7 @@ The installer will quit and all changes will be lost. - + The password contains fewer than %n uppercase letters The password contains fewer than %n uppercase letters @@ -2427,7 +2432,7 @@ The installer will quit and all changes will be lost. - + The password contains fewer than %n non-alphanumeric characters The password contains fewer than %n non-alphanumeric characters @@ -2435,7 +2440,7 @@ The installer will quit and all changes will be lost. - + The password is shorter than %n characters The password is shorter than %n characters @@ -2443,12 +2448,12 @@ The installer will quit and all changes will be lost. - + The password is a rotated version of the previous one The password is a rotated version of the previous one - + The password contains fewer than %n character classes The password contains fewer than %n character classes @@ -2456,7 +2461,7 @@ The installer will quit and all changes will be lost. - + The password contains more than %n same characters consecutively The password contains more than %n same characters consecutively @@ -2464,7 +2469,7 @@ The installer will quit and all changes will be lost. - + The password contains more than %n characters of the same class consecutively The password contains more than %n characters of the same class consecutively @@ -2472,7 +2477,7 @@ The installer will quit and all changes will be lost. - + The password contains monotonic sequence longer than %n characters The password contains monotonic sequence longer than %n characters @@ -2480,97 +2485,97 @@ The installer will quit and all changes will be lost. - + The password contains too long of a monotonic character sequence The password contains too long of a monotonic character sequence - + No password supplied No password supplied - + Cannot obtain random numbers from the RNG device Cannot obtain random numbers from the RNG device - + Password generation failed - required entropy too low for settings Password generation failed - required entropy too low for settings - + The password fails the dictionary check - %1 The password fails the dictionary check - %1 - + The password fails the dictionary check The password fails the dictionary check - + Unknown setting - %1 Unknown setting - %1 - + Unknown setting Unknown setting - + Bad integer value of setting - %1 Bad integer value of setting - %1 - + Bad integer value Bad integer value - + Setting %1 is not of integer type Setting %1 is not of integer type - + Setting is not of integer type Setting is not of integer type - + Setting %1 is not of string type Setting %1 is not of string type - + Setting is not of string type Setting is not of string type - + Opening the configuration file failed Opening the configuration file failed - + The configuration file is malformed The configuration file is malformed - + Fatal failure Fatal failure - + Unknown error Unknown error - + Password is empty Password is empty @@ -2606,12 +2611,12 @@ The installer will quit and all changes will be lost. PackageModel - + Name Name - + Description Description @@ -2624,10 +2629,15 @@ The installer will quit and all changes will be lost. Keyboard Model: - + Type here to test your keyboard Type here to test your keyboard + + + Keyboard Switch: + + Page_UserSetup @@ -2724,42 +2734,42 @@ The installer will quit and all changes will be lost. PartitionLabelsView - + Root Root - + Home Home - + Boot Boot - + EFI system EFI system - + Swap Swap - + New partition for %1 New partition for %1 - + New partition New partition - + %1 %2 size[number] filesystem[name] %1 %2 @@ -2886,102 +2896,102 @@ The installer will quit and all changes will be lost. Gathering system information... - + Partitions Partitions - + Unsafe partition actions are enabled. Unsafe partition actions are enabled. - + Partitioning is configured to <b>always</b> fail. Partitioning is configured to <b>always</b> fail. - + No partitions will be changed. No partitions will be changed. - + Current: Current: - + After: After: - + No EFI system partition configured No EFI system partition configured - + EFI system partition configured incorrectly EFI system partition configured incorrectly - + An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a suitable filesystem. An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a suitable filesystem. - + The filesystem must be mounted on <strong>%1</strong>. The filesystem must be mounted on <strong>%1</strong>. - + The filesystem must have type FAT32. The filesystem must have type FAT32. - + The filesystem must be at least %1 MiB in size. The filesystem must be at least %1 MiB in size. - + The filesystem must have flag <strong>%1</strong> set. The filesystem must have flag <strong>%1</strong> set. - + You can continue without setting up an EFI system partition but your system may fail to start. You can continue without setting up an EFI system partition but your system may fail to start. - + Option to use GPT on BIOS Option to use GPT on BIOS - + A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too.<br/><br/>To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the <strong>%2</strong> flag enabled.<br/><br/>An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT. A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too.<br/><br/>To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the <strong>%2</strong> flag enabled.<br/><br/>An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT. - + Boot partition not encrypted Boot partition not encrypted - + A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window. A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window. - + has at least one disk device available. has at least one disk device available. - + There are no partitions to install on. There are no partitions to install on. @@ -3024,17 +3034,17 @@ The installer will quit and all changes will be lost. PreserveFiles - + Saving files for later ... Saving files for later ... - + No files configured to save for later. No files configured to save for later. - + Not all of the configured files could be preserved. Not all of the configured files could be preserved. @@ -3042,14 +3052,14 @@ The installer will quit and all changes will be lost. ProcessResult - + There was no output from the command. There was no output from the command. - + Output: @@ -3058,52 +3068,52 @@ Output: - + External command crashed. External command crashed. - + Command <i>%1</i> crashed. Command <i>%1</i> crashed. - + External command failed to start. External command failed to start. - + Command <i>%1</i> failed to start. Command <i>%1</i> failed to start. - + Internal error when starting command. Internal error when starting command. - + Bad parameters for process job call. Bad parameters for process job call. - + External command failed to finish. External command failed to finish. - + Command <i>%1</i> failed to finish in %2 seconds. Command <i>%1</i> failed to finish in %2 seconds. - + External command finished with errors. External command finished with errors. - + Command <i>%1</i> finished with exit code %2. Command <i>%1</i> finished with exit code %2. @@ -3111,7 +3121,7 @@ Output: QObject - + %1 (%2) %1 (%2) @@ -3136,8 +3146,8 @@ Output: swap - - + + Default Default @@ -3155,12 +3165,12 @@ Output: Path <pre>%1</pre> must be an absolute path. - + Directory not found Directory not found - + Could not create new random file <pre>%1</pre>. Could not create new random file <pre>%1</pre>. @@ -3181,7 +3191,7 @@ Output: (no mount point) - + Unpartitioned space or unknown partition table Unpartitioned space or unknown partition table @@ -3199,7 +3209,7 @@ Output: RemoveUserJob - + Remove live user from target system Remove live user from target system @@ -3243,68 +3253,68 @@ Output: ResizeFSJob - + Resize Filesystem Job Resize Filesystem Job - + Invalid configuration Invalid configuration - + The file-system resize job has an invalid configuration and will not run. The file-system resize job has an invalid configuration and will not run. - + KPMCore not Available KPMCore not Available - + Calamares cannot start KPMCore for the file-system resize job. Calamares cannot start KPMCore for the file-system resize job. - - - - - + + + + + Resize Failed Resize Failed - + The filesystem %1 could not be found in this system, and cannot be resized. The filesystem %1 could not be found in this system, and cannot be resized. - + The device %1 could not be found in this system, and cannot be resized. The device %1 could not be found in this system, and cannot be resized. - - + + The filesystem %1 cannot be resized. The filesystem %1 cannot be resized. - - + + The device %1 cannot be resized. The device %1 cannot be resized. - + The filesystem %1 must be resized, but cannot. The filesystem %1 must be resized, but cannot. - + The device %1 must be resized, but cannot The device %1 must be resized, but cannot @@ -3317,17 +3327,17 @@ Output: Resize partition %1. - + Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>. Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>. - + Resizing %2MiB partition %1 to %3MiB. Resizing %2MiB partition %1 to %3MiB. - + The installer failed to resize partition %1 on disk '%2'. The installer failed to resize partition %1 on disk '%2'. @@ -3388,24 +3398,24 @@ Output: Set hostname %1 - + Set hostname <strong>%1</strong>. Set hostname <strong>%1</strong>. - + Setting hostname %1. Setting hostname %1. - - + + Internal Error Internal Error - - + + Cannot write hostname to target system Cannot write hostname to target system @@ -3413,29 +3423,29 @@ Output: SetKeyboardLayoutJob - + Set keyboard model to %1, layout to %2-%3 Set keyboard model to %1, layout to %2-%3 - + Failed to write keyboard configuration for the virtual console. Failed to write keyboard configuration for the virtual console. - - - + + + Failed to write to %1 Failed to write to %1 - + Failed to write keyboard configuration for X11. Failed to write keyboard configuration for X11. - + Failed to write keyboard configuration to existing /etc/default directory. Failed to write keyboard configuration to existing /etc/default directory. @@ -3443,82 +3453,82 @@ Output: SetPartFlagsJob - + Set flags on partition %1. Set flags on partition %1. - + Set flags on %1MiB %2 partition. Set flags on %1MiB %2 partition. - + Set flags on new partition. Set flags on new partition. - + Clear flags on partition <strong>%1</strong>. Clear flags on partition <strong>%1</strong>. - + Clear flags on %1MiB <strong>%2</strong> partition. Clear flags on %1MiB <strong>%2</strong> partition. - + Clear flags on new partition. Clear flags on new partition. - + Flag partition <strong>%1</strong> as <strong>%2</strong>. Flag partition <strong>%1</strong> as <strong>%2</strong>. - + Flag %1MiB <strong>%2</strong> partition as <strong>%3</strong>. Flag %1MiB <strong>%2</strong> partition as <strong>%3</strong>. - + Flag new partition as <strong>%1</strong>. Flag new partition as <strong>%1</strong>. - + Clearing flags on partition <strong>%1</strong>. Clearing flags on partition <strong>%1</strong>. - + Clearing flags on %1MiB <strong>%2</strong> partition. Clearing flags on %1MiB <strong>%2</strong> partition. - + Clearing flags on new partition. Clearing flags on new partition. - + Setting flags <strong>%2</strong> on partition <strong>%1</strong>. Setting flags <strong>%2</strong> on partition <strong>%1</strong>. - + Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition. Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition. - + Setting flags <strong>%1</strong> on new partition. Setting flags <strong>%1</strong> on new partition. - + The installer failed to set flags on partition %1. The installer failed to set flags on partition %1. @@ -3526,42 +3536,38 @@ Output: SetPasswordJob - + Set password for user %1 Set password for user %1 - + Setting password for user %1. Setting password for user %1. - + Bad destination system path. Bad destination system path. - + rootMountPoint is %1 rootMountPoint is %1 - + Cannot disable root account. Cannot disable root account. - - passwd terminated with error code %1. - passwd terminated with error code %1. - - - + Cannot set password for user %1. Cannot set password for user %1. - + + usermod terminated with error code %1. usermod terminated with error code %1. @@ -3569,37 +3575,37 @@ Output: SetTimezoneJob - + Set timezone to %1/%2 Set timezone to %1/%2 - + Cannot access selected timezone path. Cannot access selected timezone path. - + Bad path: %1 Bad path: %1 - + Cannot set timezone. Cannot set timezone. - + Link creation failed, target: %1; link name: %2 Link creation failed, target: %1; link name: %2 - + Cannot set timezone, Cannot set timezone, - + Cannot open /etc/timezone for writing Cannot open /etc/timezone for writing @@ -3607,18 +3613,18 @@ Output: SetupGroupsJob - + Preparing groups. Preparing groups. - - + + Could not create groups in target system Could not create groups in target system - + These groups are missing in the target system: %1 These groups are missing in the target system: %1 @@ -3631,12 +3637,12 @@ Output: Configure <pre>sudo</pre> users. - + Cannot chmod sudoers file. Cannot chmod sudoers file. - + Cannot create sudoers file for writing. Cannot create sudoers file for writing. @@ -3644,7 +3650,7 @@ Output: ShellProcessJob - + Shell Processes Job Shell Processes Job @@ -3689,22 +3695,22 @@ Output: TrackingInstallJob - + Installation feedback Installation feedback - + Sending installation feedback. Sending installation feedback. - + Internal error in install-tracking. Internal error in install-tracking. - + HTTP request timed out. HTTP request timed out. @@ -3712,28 +3718,28 @@ Output: TrackingKUserFeedbackJob - + KDE user feedback KDE user feedback - + Configuring KDE user feedback. Configuring KDE user feedback. - - + + Error in KDE user feedback configuration. Error in KDE user feedback configuration. - + Could not configure KDE user feedback correctly, script error %1. Could not configure KDE user feedback correctly, script error %1. - + Could not configure KDE user feedback correctly, Calamares error %1. Could not configure KDE user feedback correctly, Calamares error %1. @@ -3741,28 +3747,28 @@ Output: TrackingMachineUpdateManagerJob - + Machine feedback Machine feedback - + Configuring machine feedback. Configuring machine feedback. - - + + Error in machine feedback configuration. Error in machine feedback configuration. - + Could not configure machine feedback correctly, script error %1. Could not configure machine feedback correctly, script error %1. - + Could not configure machine feedback correctly, Calamares error %1. Could not configure machine feedback correctly, Calamares error %1. @@ -3821,12 +3827,12 @@ Output: Unmount file systems. - + No target system available. No target system available. - + No rootMountPoint is set. No rootMountPoint is set. @@ -3834,12 +3840,12 @@ Output: UsersPage - + <small>If more than one person will use this computer, you can create multiple accounts after setup.</small> <small>If more than one person will use this computer, you can create multiple accounts after setup.</small> - + <small>If more than one person will use this computer, you can create multiple accounts after installation.</small> <small>If more than one person will use this computer, you can create multiple accounts after installation.</small> @@ -3982,12 +3988,12 @@ Output: %1 support - + About %1 setup About %1 setup - + About %1 installer About %1 installer @@ -4011,7 +4017,7 @@ Output: ZfsJob - + Create ZFS pools and datasets Create ZFS pools and datasets @@ -4056,23 +4062,23 @@ Output: calamares-sidebar - + About About - + Debug Debug - + Show information about Calamares - + Show debug information diff --git a/lang/python.pot b/lang/python.pot index 3f63ac700..ff75d12e7 100644 --- a/lang/python.pot +++ b/lang/python.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2023-08-28 23:53+0200\n" +"POT-Creation-Date: 2023-09-28 22:49+0200\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -109,8 +109,8 @@ msgid "Writing fstab." msgstr "" #: src/modules/fstab/main.py:377 src/modules/fstab/main.py:383 -#: src/modules/fstab/main.py:411 src/modules/initcpiocfg/main.py:267 -#: src/modules/initcpiocfg/main.py:271 src/modules/initramfscfg/main.py:85 +#: src/modules/fstab/main.py:411 src/modules/initcpiocfg/main.py:256 +#: src/modules/initcpiocfg/main.py:260 src/modules/initramfscfg/main.py:85 #: src/modules/initramfscfg/main.py:89 src/modules/localecfg/main.py:140 #: src/modules/mount/main.py:329 src/modules/networkcfg/main.py:105 #: src/modules/openrcdmcryptcfg/main.py:72 @@ -146,11 +146,11 @@ msgstr "" msgid "Configuring mkinitcpio." msgstr "" -#: src/modules/initcpiocfg/main.py:268 +#: src/modules/initcpiocfg/main.py:257 msgid "No partitions are defined for 
initcpiocfg
." msgstr "" -#: src/modules/initcpiocfg/main.py:272 +#: src/modules/initcpiocfg/main.py:261 msgid "No root mount point for 
initcpiocfg
." msgstr ""