diff --git a/lang/calamares_az.ts b/lang/calamares_az.ts
new file mode 100644
index 000000000..fc250af64
--- /dev/null
+++ b/lang/calamares_az.ts
@@ -0,0 +1,3827 @@
+
+
+
+
+ BootInfoWidget
+
+
+ The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode.
+
+
+
+
+ This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.
+
+
+
+
+ This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.
+
+
+
+
+ BootLoaderModel
+
+
+ Master Boot Record of %1
+
+
+
+
+ Boot Partition
+
+
+
+
+ System Partition
+
+
+
+
+ Do not install a boot loader
+
+
+
+
+ %1 (%2)
+
+
+
+
+ Calamares::BlankViewStep
+
+
+ Blank Page
+
+
+
+
+ Calamares::DebugWindow
+
+
+ Form
+
+
+
+
+ GlobalStorage
+
+
+
+
+ JobQueue
+
+
+
+
+ Modules
+
+
+
+
+ Type:
+
+
+
+
+
+ none
+
+
+
+
+ Interface:
+
+
+
+
+ Tools
+
+
+
+
+ Reload Stylesheet
+
+
+
+
+ Widget Tree
+
+
+
+
+ Debug information
+
+
+
+
+ Calamares::ExecutionViewStep
+
+
+ Set up
+
+
+
+
+ Install
+
+
+
+
+ Calamares::FailJob
+
+
+ Job failed (%1)
+
+
+
+
+ Programmed job failure was explicitly requested.
+
+
+
+
+ Calamares::JobThread
+
+
+ Done
+
+
+
+
+ Calamares::NamedJob
+
+
+ Example job (%1)
+
+
+
+
+ Calamares::ProcessJob
+
+
+ Run command '%1' in target system.
+
+
+
+
+ Run command '%1'.
+
+
+
+
+ Running command %1 %2
+
+
+
+
+ Calamares::PythonJob
+
+
+ Running %1 operation.
+
+
+
+
+ Bad working directory path
+
+
+
+
+ Working directory %1 for python job %2 is not readable.
+
+
+
+
+ Bad main script file
+
+
+
+
+ Main script file %1 for python job %2 is not readable.
+
+
+
+
+ Boost.Python error in job "%1".
+
+
+
+
+ Calamares::QmlViewStep
+
+
+ Loading ...
+
+
+
+
+ QML Step <i>%1</i>.
+
+
+
+
+ Loading failed.
+
+
+
+
+ Calamares::RequirementsChecker
+
+
+ Waiting for %n module(s).
+
+
+
+
+
+
+
+ (%n second(s))
+
+
+
+
+
+
+
+ System-requirements checking is complete.
+
+
+
+
+ Calamares::ViewManager
+
+
+ Setup Failed
+
+
+
+
+ Installation Failed
+
+
+
+
+ Would you like to paste the install log to the web?
+
+
+
+
+ Error
+
+
+
+
+
+ &Yes
+
+
+
+
+
+ &No
+
+
+
+
+ &Close
+
+
+
+
+ Install Log Paste URL
+
+
+
+
+ The upload was unsuccessful. No web-paste was done.
+
+
+
+
+ Calamares Initialization Failed
+
+
+
+
+ %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution.
+
+
+
+
+ <br/>The following modules could not be loaded:
+
+
+
+
+ Continue with setup?
+
+
+
+
+ Continue with installation?
+
+
+
+
+ The %1 setup program is about to make changes to your disk in order to set up %2.<br/><strong>You will not be able to undo these changes.</strong>
+
+
+
+
+ The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong>
+
+
+
+
+ &Set up now
+
+
+
+
+ &Install now
+
+
+
+
+ Go &back
+
+
+
+
+ &Set up
+
+
+
+
+ &Install
+
+
+
+
+ Setup is complete. Close the setup program.
+
+
+
+
+ The installation is complete. Close the installer.
+
+
+
+
+ Cancel setup without changing the system.
+
+
+
+
+ Cancel installation without changing the system.
+
+
+
+
+ &Next
+
+
+
+
+ &Back
+
+
+
+
+ &Done
+
+
+
+
+ &Cancel
+
+
+
+
+ Cancel setup?
+
+
+
+
+ Cancel installation?
+
+
+
+
+ Do you really want to cancel the current setup process?
+The setup program will quit and all changes will be lost.
+
+
+
+
+ Do you really want to cancel the current install process?
+The installer will quit and all changes will be lost.
+
+
+
+
+ CalamaresPython::Helper
+
+
+ Unknown exception type
+
+
+
+
+ unparseable Python error
+
+
+
+
+ unparseable Python traceback
+
+
+
+
+ Unfetchable Python error.
+
+
+
+
+ CalamaresUtils
+
+
+ Install log posted to:
+%1
+
+
+
+
+ CalamaresWindow
+
+
+ Show debug information
+
+
+
+
+ &Back
+
+
+
+
+ &Next
+
+
+
+
+ &Cancel
+
+
+
+
+ %1 Setup Program
+
+
+
+
+ %1 Installer
+
+
+
+
+ CheckerContainer
+
+
+ Gathering system information...
+
+
+
+
+ ChoicePage
+
+
+ Form
+
+
+
+
+ Select storage de&vice:
+
+
+
+
+
+
+
+ Current:
+
+
+
+
+ After:
+
+
+
+
+ <strong>Manual partitioning</strong><br/>You can create or resize partitions yourself. Having a GPT partition table and <strong>fat32 512Mb /boot partition is a must for UEFI installs</strong>, either use an existing without formatting or create one.
+
+
+
+
+ Reuse %1 as home partition for %2.
+
+
+
+
+ <strong>Select a partition to shrink, then drag the bottom bar to resize</strong>
+
+
+
+
+ %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4.
+
+
+
+
+ Boot loader location:
+
+
+
+
+ <strong>Select a partition to install on</strong>
+
+
+
+
+ An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.
+
+
+
+
+ The EFI system partition at %1 will be used for starting %2.
+
+
+
+
+ EFI system partition:
+
+
+
+
+ This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+
+
+
+ <strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device.
+
+
+
+
+
+
+
+ <strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1.
+
+
+
+
+
+
+
+ <strong>Replace a partition</strong><br/>Replaces a partition with %1.
+
+
+
+
+ This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ No Swap
+
+
+
+
+ Reuse Swap
+
+
+
+
+ Swap (no Hibernate)
+
+
+
+
+ Swap (with Hibernate)
+
+
+
+
+ Swap to file
+
+
+
+
+ ClearMountsJob
+
+
+ Clear mounts for partitioning operations on %1
+
+
+
+
+ Clearing mounts for partitioning operations on %1.
+
+
+
+
+ Cleared all mounts for %1
+
+
+
+
+ ClearTempMountsJob
+
+
+ Clear all temporary mounts.
+
+
+
+
+ Clearing all temporary mounts.
+
+
+
+
+ Cannot get list of temporary mounts.
+
+
+
+
+ Cleared all temporary mounts.
+
+
+
+
+ CommandList
+
+
+
+ Could not run command.
+
+
+
+
+ The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.
+
+
+
+
+ The command needs to know the user's name, but no username is defined.
+
+
+
+
+ Config
+
+
+ Set keyboard model to %1.<br/>
+
+
+
+
+ Set keyboard layout to %1/%2.
+
+
+
+
+ The system language will be set to %1.
+
+
+
+
+ The numbers and dates locale will be set to %1.
+
+
+
+
+ Set timezone to %1/%2.<br/>
+
+
+
+
+ Network Installation. (Disabled: Incorrect configuration)
+
+
+
+
+ Network Installation. (Disabled: Received invalid groups data)
+
+
+
+
+ Network Installation. (Disabled: internal error)
+
+
+
+
+ Network Installation. (Disabled: Unable to fetch package lists, check your network connection)
+
+
+
+
+ This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.
+
+
+
+
+ This program will ask you some questions and set up %2 on your computer.
+
+
+
+
+ <h1>Welcome to the Calamares setup program for %1.</h1>
+
+
+
+
+ <h1>Welcome to %1 setup.</h1>
+
+
+
+
+ <h1>Welcome to the Calamares installer for %1.</h1>
+
+
+
+
+ <h1>Welcome to the %1 installer.</h1>
+
+
+
+
+ ContextualProcessJob
+
+
+ Contextual Processes Job
+
+
+
+
+ CreatePartitionDialog
+
+
+ Create a Partition
+
+
+
+
+ Si&ze:
+
+
+
+
+ MiB
+
+
+
+
+ Partition &Type:
+
+
+
+
+ &Primary
+
+
+
+
+ E&xtended
+
+
+
+
+ Fi&le System:
+
+
+
+
+ LVM LV name
+
+
+
+
+ &Mount Point:
+
+
+
+
+ Flags:
+
+
+
+
+ En&crypt
+
+
+
+
+ Logical
+
+
+
+
+ Primary
+
+
+
+
+ GPT
+
+
+
+
+ Mountpoint already in use. Please select another one.
+
+
+
+
+ CreatePartitionJob
+
+
+ Create new %2MiB partition on %4 (%3) with file system %1.
+
+
+
+
+ Create new <strong>%2MiB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>.
+
+
+
+
+ Creating new %1 partition on %2.
+
+
+
+
+ The installer failed to create partition on disk '%1'.
+
+
+
+
+ CreatePartitionTableDialog
+
+
+ Create Partition Table
+
+
+
+
+ Creating a new partition table will delete all existing data on the disk.
+
+
+
+
+ What kind of partition table do you want to create?
+
+
+
+
+ Master Boot Record (MBR)
+
+
+
+
+ GUID Partition Table (GPT)
+
+
+
+
+ CreatePartitionTableJob
+
+
+ Create new %1 partition table on %2.
+
+
+
+
+ Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3).
+
+
+
+
+ Creating new %1 partition table on %2.
+
+
+
+
+ The installer failed to create a partition table on %1.
+
+
+
+
+ CreateUserJob
+
+
+ Create user %1
+
+
+
+
+ Create user <strong>%1</strong>.
+
+
+
+
+ Creating user %1.
+
+
+
+
+ Sudoers dir is not writable.
+
+
+
+
+ Cannot create sudoers file for writing.
+
+
+
+
+ Cannot chmod sudoers file.
+
+
+
+
+ Cannot open groups file for reading.
+
+
+
+
+ CreateVolumeGroupDialog
+
+
+ Create Volume Group
+
+
+
+
+ CreateVolumeGroupJob
+
+
+ Create new volume group named %1.
+
+
+
+
+ Create new volume group named <strong>%1</strong>.
+
+
+
+
+ Creating new volume group named %1.
+
+
+
+
+ The installer failed to create a volume group named '%1'.
+
+
+
+
+ DeactivateVolumeGroupJob
+
+
+
+ Deactivate volume group named %1.
+
+
+
+
+ Deactivate volume group named <strong>%1</strong>.
+
+
+
+
+ The installer failed to deactivate a volume group named %1.
+
+
+
+
+ DeletePartitionJob
+
+
+ Delete partition %1.
+
+
+
+
+ Delete partition <strong>%1</strong>.
+
+
+
+
+ Deleting partition %1.
+
+
+
+
+ The installer failed to delete partition %1.
+
+
+
+
+ DeviceInfoWidget
+
+
+ This device has a <strong>%1</strong> partition table.
+
+
+
+
+ This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.
+
+
+
+
+ This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page.
+
+
+
+
+ <br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment.
+
+
+
+
+ <br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions.
+
+
+
+
+ The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred.
+
+
+
+
+ DeviceModel
+
+
+ %1 - %2 (%3)
+ device[name] - size[number] (device-node[name])
+
+
+
+
+ %1 - (%2)
+ device[name] - (device-node[name])
+
+
+
+
+ DracutLuksCfgJob
+
+
+ Write LUKS configuration for Dracut to %1
+
+
+
+
+ Skip writing LUKS configuration for Dracut: "/" partition is not encrypted
+
+
+
+
+ Failed to open %1
+
+
+
+
+ DummyCppJob
+
+
+ Dummy C++ Job
+
+
+
+
+ EditExistingPartitionDialog
+
+
+ Edit Existing Partition
+
+
+
+
+ Content:
+
+
+
+
+ &Keep
+
+
+
+
+ Format
+
+
+
+
+ Warning: Formatting the partition will erase all existing data.
+
+
+
+
+ &Mount Point:
+
+
+
+
+ Si&ze:
+
+
+
+
+ MiB
+
+
+
+
+ Fi&le System:
+
+
+
+
+ Flags:
+
+
+
+
+ Mountpoint already in use. Please select another one.
+
+
+
+
+ EncryptWidget
+
+
+ Form
+
+
+
+
+ En&crypt system
+
+
+
+
+ Passphrase
+
+
+
+
+ Confirm passphrase
+
+
+
+
+ Please enter the same passphrase in both boxes.
+
+
+
+
+ FillGlobalStorageJob
+
+
+ Set partition information
+
+
+
+
+ Install %1 on <strong>new</strong> %2 system partition.
+
+
+
+
+ Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>.
+
+
+
+
+ Install %2 on %3 system partition <strong>%1</strong>.
+
+
+
+
+ Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>.
+
+
+
+
+ Install boot loader on <strong>%1</strong>.
+
+
+
+
+ Setting up mount points.
+
+
+
+
+ FinishedPage
+
+
+ Form
+
+
+
+
+ &Restart now
+
+
+
+
+ <h1>All done.</h1><br/>%1 has been set up on your computer.<br/>You may now start using your new system.
+
+
+
+
+ <html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the setup program.</p></body></html>
+
+
+
+
+ <h1>All done.</h1><br/>%1 has been installed on your computer.<br/>You may now restart into your new system, or continue using the %2 Live environment.
+
+
+
+
+ <html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the installer.</p></body></html>
+
+
+
+
+ <h1>Setup Failed</h1><br/>%1 has not been set up on your computer.<br/>The error message was: %2.
+
+
+
+
+ <h1>Installation Failed</h1><br/>%1 has not been installed on your computer.<br/>The error message was: %2.
+
+
+
+
+ FinishedViewStep
+
+
+ Finish
+
+
+
+
+ Setup Complete
+
+
+
+
+ Installation Complete
+
+
+
+
+ The setup of %1 is complete.
+
+
+
+
+ The installation of %1 is complete.
+
+
+
+
+ FormatPartitionJob
+
+
+ Format partition %1 (file system: %2, size: %3 MiB) on %4.
+
+
+
+
+ Format <strong>%3MiB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>.
+
+
+
+
+ Formatting partition %1 with file system %2.
+
+
+
+
+ The installer failed to format partition %1 on disk '%2'.
+
+
+
+
+ GeneralRequirements
+
+
+ has at least %1 GiB available drive space
+
+
+
+
+ There is not enough drive space. At least %1 GiB is required.
+
+
+
+
+ has at least %1 GiB working memory
+
+
+
+
+ The system does not have enough working memory. At least %1 GiB is required.
+
+
+
+
+ is plugged in to a power source
+
+
+
+
+ The system is not plugged in to a power source.
+
+
+
+
+ is connected to the Internet
+
+
+
+
+ The system is not connected to the Internet.
+
+
+
+
+ is running the installer as an administrator (root)
+
+
+
+
+ The setup program is not running with administrator rights.
+
+
+
+
+ The installer is not running with administrator rights.
+
+
+
+
+ has a screen large enough to show the whole installer
+
+
+
+
+ The screen is too small to display the setup program.
+
+
+
+
+ The screen is too small to display the installer.
+
+
+
+
+ HostInfoJob
+
+
+ Collecting information about your machine.
+
+
+
+
+ IDJob
+
+
+
+
+
+ OEM Batch Identifier
+
+
+
+
+ Could not create directories <code>%1</code>.
+
+
+
+
+ Could not open file <code>%1</code>.
+
+
+
+
+ Could not write to file <code>%1</code>.
+
+
+
+
+ InitcpioJob
+
+
+ Creating initramfs with mkinitcpio.
+
+
+
+
+ InitramfsJob
+
+
+ Creating initramfs.
+
+
+
+
+ InteractiveTerminalPage
+
+
+ Konsole not installed
+
+
+
+
+ Please install KDE Konsole and try again!
+
+
+
+
+ Executing script: <code>%1</code>
+
+
+
+
+ InteractiveTerminalViewStep
+
+
+ Script
+
+
+
+
+ KeyboardPage
+
+
+ Set keyboard model to %1.<br/>
+
+
+
+
+ Set keyboard layout to %1/%2.
+
+
+
+
+ KeyboardQmlViewStep
+
+
+ Keyboard
+
+
+
+
+ KeyboardViewStep
+
+
+ Keyboard
+
+
+
+
+ LCLocaleDialog
+
+
+ System locale setting
+
+
+
+
+ The system locale setting affects the language and character set for some command line user interface elements.<br/>The current setting is <strong>%1</strong>.
+
+
+
+
+ &Cancel
+
+
+
+
+ &OK
+
+
+
+
+ LicensePage
+
+
+ Form
+
+
+
+
+ <h1>License Agreement</h1>
+
+
+
+
+ I accept the terms and conditions above.
+
+
+
+
+ Please review the End User License Agreements (EULAs).
+
+
+
+
+ This setup procedure will install proprietary software that is subject to licensing terms.
+
+
+
+
+ If you do not agree with the terms, the setup procedure cannot continue.
+
+
+
+
+ This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.
+
+
+
+
+ If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.
+
+
+
+
+ LicenseViewStep
+
+
+ License
+
+
+
+
+ LicenseWidget
+
+
+ URL: %1
+
+
+
+
+ <strong>%1 driver</strong><br/>by %2
+ %1 is an untranslatable product name, example: Creative Audigy driver
+
+
+
+
+ <strong>%1 graphics driver</strong><br/><font color="Grey">by %2</font>
+ %1 is usually a vendor name, example: Nvidia graphics driver
+
+
+
+
+ <strong>%1 browser plugin</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1 codec</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1 package</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ File: %1
+
+
+
+
+ Hide license text
+
+
+
+
+ Show the license text
+
+
+
+
+ Open license agreement in browser.
+
+
+
+
+ LocalePage
+
+
+ Region:
+
+
+
+
+ Zone:
+
+
+
+
+
+ &Change...
+
+
+
+
+ The system language will be set to %1.
+
+
+
+
+ The numbers and dates locale will be set to %1.
+
+
+
+
+ Set timezone to %1/%2.<br/>
+
+
+
+
+ LocaleQmlViewStep
+
+
+ Location
+
+
+
+
+ LocaleViewStep
+
+
+ Location
+
+
+
+
+ LuksBootKeyFileJob
+
+
+ Configuring LUKS key file.
+
+
+
+
+
+ No partitions are defined.
+
+
+
+
+
+
+ Encrypted rootfs setup error
+
+
+
+
+ Root partition %1 is LUKS but no passphrase has been set.
+
+
+
+
+ Could not create LUKS key file for root partition %1.
+
+
+
+
+ Could not configure LUKS key file on partition %1.
+
+
+
+
+ MachineIdJob
+
+
+ Generate machine-id.
+
+
+
+
+ Configuration Error
+
+
+
+
+ No root mount point is set for MachineId.
+
+
+
+
+ NetInstallViewStep
+
+
+
+ Package selection
+
+
+
+
+ Office software
+
+
+
+
+ Office package
+
+
+
+
+ Browser software
+
+
+
+
+ Browser package
+
+
+
+
+ Web browser
+
+
+
+
+ Kernel
+
+
+
+
+ Services
+
+
+
+
+ Login
+
+
+
+
+ Desktop
+
+
+
+
+ Applications
+
+
+
+
+ Communication
+
+
+
+
+ Development
+
+
+
+
+ Office
+
+
+
+
+ Multimedia
+
+
+
+
+ Internet
+
+
+
+
+ Theming
+
+
+
+
+ Gaming
+
+
+
+
+ Utilities
+
+
+
+
+ NotesQmlViewStep
+
+
+ Notes
+
+
+
+
+ OEMPage
+
+
+ Ba&tch:
+
+
+
+
+ <html><head/><body><p>Enter a batch-identifier here. This will be stored in the target system.</p></body></html>
+
+
+
+
+ <html><head/><body><h1>OEM Configuration</h1><p>Calamares will use OEM settings while configuring the target system.</p></body></html>
+
+
+
+
+ OEMViewStep
+
+
+ OEM Configuration
+
+
+
+
+ Set the OEM Batch Identifier to <code>%1</code>.
+
+
+
+
+ PWQ
+
+
+ Password is too short
+
+
+
+
+ Password is too long
+
+
+
+
+ Password is too weak
+
+
+
+
+ Memory allocation error when setting '%1'
+
+
+
+
+ Memory allocation error
+
+
+
+
+ The password is the same as the old one
+
+
+
+
+ The password is a palindrome
+
+
+
+
+ The password differs with case changes only
+
+
+
+
+ The password is too similar to the old one
+
+
+
+
+ The password contains the user name in some form
+
+
+
+
+ The password contains words from the real name of the user in some form
+
+
+
+
+ The password contains forbidden words in some form
+
+
+
+
+ The password contains less than %1 digits
+
+
+
+
+ The password contains too few digits
+
+
+
+
+ The password contains less than %1 uppercase letters
+
+
+
+
+ The password contains too few uppercase letters
+
+
+
+
+ The password contains less than %1 lowercase letters
+
+
+
+
+ The password contains too few lowercase letters
+
+
+
+
+ The password contains less than %1 non-alphanumeric characters
+
+
+
+
+ The password contains too few non-alphanumeric characters
+
+
+
+
+ The password is shorter than %1 characters
+
+
+
+
+ The password is too short
+
+
+
+
+ The password is just rotated old one
+
+
+
+
+ The password contains less than %1 character classes
+
+
+
+
+ The password does not contain enough character classes
+
+
+
+
+ The password contains more than %1 same characters consecutively
+
+
+
+
+ The password contains too many same characters consecutively
+
+
+
+
+ The password contains more than %1 characters of the same class consecutively
+
+
+
+
+ The password contains too many characters of the same class consecutively
+
+
+
+
+ The password contains monotonic sequence longer than %1 characters
+
+
+
+
+ The password contains too long of a monotonic character sequence
+
+
+
+
+ No password supplied
+
+
+
+
+ Cannot obtain random numbers from the RNG device
+
+
+
+
+ Password generation failed - required entropy too low for settings
+
+
+
+
+ The password fails the dictionary check - %1
+
+
+
+
+ The password fails the dictionary check
+
+
+
+
+ Unknown setting - %1
+
+
+
+
+ Unknown setting
+
+
+
+
+ Bad integer value of setting - %1
+
+
+
+
+ Bad integer value
+
+
+
+
+ Setting %1 is not of integer type
+
+
+
+
+ Setting is not of integer type
+
+
+
+
+ Setting %1 is not of string type
+
+
+
+
+ Setting is not of string type
+
+
+
+
+ Opening the configuration file failed
+
+
+
+
+ The configuration file is malformed
+
+
+
+
+ Fatal failure
+
+
+
+
+ Unknown error
+
+
+
+
+ Password is empty
+
+
+
+
+ PackageChooserPage
+
+
+ Form
+
+
+
+
+ Product Name
+
+
+
+
+ TextLabel
+
+
+
+
+ Long Product Description
+
+
+
+
+ Package Selection
+
+
+
+
+ Please pick a product from the list. The selected product will be installed.
+
+
+
+
+ PackageChooserViewStep
+
+
+ Packages
+
+
+
+
+ PackageModel
+
+
+ Name
+
+
+
+
+ Description
+
+
+
+
+ Page_Keyboard
+
+
+ Form
+
+
+
+
+ Keyboard Model:
+
+
+
+
+ Type here to test your keyboard
+
+
+
+
+ Page_UserSetup
+
+
+ Form
+
+
+
+
+ What is your name?
+
+
+
+
+ Your Full Name
+
+
+
+
+ What name do you want to use to log in?
+
+
+
+
+ login
+
+
+
+
+ What is the name of this computer?
+
+
+
+
+ <small>This name will be used if you make the computer visible to others on a network.</small>
+
+
+
+
+ Computer Name
+
+
+
+
+ Choose a password to keep your account safe.
+
+
+
+
+
+ <small>Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.</small>
+
+
+
+
+
+ Password
+
+
+
+
+
+ Repeat Password
+
+
+
+
+ When this box is checked, password-strength checking is done and you will not be able to use a weak password.
+
+
+
+
+ Require strong passwords.
+
+
+
+
+ Log in automatically without asking for the password.
+
+
+
+
+ Use the same password for the administrator account.
+
+
+
+
+ Choose a password for the administrator account.
+
+
+
+
+
+ <small>Enter the same password twice, so that it can be checked for typing errors.</small>
+
+
+
+
+ PartitionLabelsView
+
+
+ Root
+
+
+
+
+ Home
+
+
+
+
+ Boot
+
+
+
+
+ EFI system
+
+
+
+
+ Swap
+
+
+
+
+ New partition for %1
+
+
+
+
+ New partition
+
+
+
+
+ %1 %2
+ size[number] filesystem[name]
+
+
+
+
+ PartitionModel
+
+
+
+ Free Space
+
+
+
+
+
+ New partition
+
+
+
+
+ Name
+
+
+
+
+ File System
+
+
+
+
+ Mount Point
+
+
+
+
+ Size
+
+
+
+
+ PartitionPage
+
+
+ Form
+
+
+
+
+ Storage de&vice:
+
+
+
+
+ &Revert All Changes
+
+
+
+
+ New Partition &Table
+
+
+
+
+ Cre&ate
+
+
+
+
+ &Edit
+
+
+
+
+ &Delete
+
+
+
+
+ New Volume Group
+
+
+
+
+ Resize Volume Group
+
+
+
+
+ Deactivate Volume Group
+
+
+
+
+ Remove Volume Group
+
+
+
+
+ I&nstall boot loader on:
+
+
+
+
+ Are you sure you want to create a new partition table on %1?
+
+
+
+
+ Can not create new partition
+
+
+
+
+ The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.
+
+
+
+
+ PartitionViewStep
+
+
+ Gathering system information...
+
+
+
+
+ Partitions
+
+
+
+
+ Install %1 <strong>alongside</strong> another operating system.
+
+
+
+
+ <strong>Erase</strong> disk and install %1.
+
+
+
+
+ <strong>Replace</strong> a partition with %1.
+
+
+
+
+ <strong>Manual</strong> partitioning.
+
+
+
+
+ Install %1 <strong>alongside</strong> another operating system on disk <strong>%2</strong> (%3).
+
+
+
+
+ <strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1.
+
+
+
+
+ <strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1.
+
+
+
+
+ <strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2).
+
+
+
+
+ Disk <strong>%1</strong> (%2)
+
+
+
+
+ Current:
+
+
+
+
+ After:
+
+
+
+
+ No EFI system partition configured
+
+
+
+
+ An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a FAT32 filesystem with the <strong>%3</strong> flag enabled and mount point <strong>%2</strong>.<br/><br/>You can continue without setting up an EFI system partition but your system may fail to start.
+
+
+
+
+ An EFI system partition is necessary to start %1.<br/><br/>A partition was configured with mount point <strong>%2</strong> but its <strong>%3</strong> flag is not set.<br/>To set the flag, go back and edit the partition.<br/><br/>You can continue without setting the flag but your system may fail to start.
+
+
+
+
+ EFI system partition flag not set
+
+
+
+
+ Option to use GPT on BIOS
+
+
+
+
+ A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too.<br/><br/>To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the <strong>bios_grub</strong> flag enabled.<br/><br/>An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT.
+
+
+
+
+ Boot partition not encrypted
+
+
+
+
+ A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window.
+
+
+
+
+ has at least one disk device available.
+
+
+
+
+ There are no partitions to install on.
+
+
+
+
+ PlasmaLnfJob
+
+
+ Plasma Look-and-Feel Job
+
+
+
+
+
+ Could not select KDE Plasma Look-and-Feel package
+
+
+
+
+ PlasmaLnfPage
+
+
+ Form
+
+
+
+
+ Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is set up. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.
+
+
+
+
+ Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.
+
+
+
+
+ PlasmaLnfViewStep
+
+
+ Look-and-Feel
+
+
+
+
+ PreserveFiles
+
+
+ Saving files for later ...
+
+
+
+
+ No files configured to save for later.
+
+
+
+
+ Not all of the configured files could be preserved.
+
+
+
+
+ ProcessResult
+
+
+
+There was no output from the command.
+
+
+
+
+
+Output:
+
+
+
+
+
+ External command crashed.
+
+
+
+
+ Command <i>%1</i> crashed.
+
+
+
+
+ External command failed to start.
+
+
+
+
+ Command <i>%1</i> failed to start.
+
+
+
+
+ Internal error when starting command.
+
+
+
+
+ Bad parameters for process job call.
+
+
+
+
+ External command failed to finish.
+
+
+
+
+ Command <i>%1</i> failed to finish in %2 seconds.
+
+
+
+
+ External command finished with errors.
+
+
+
+
+ Command <i>%1</i> finished with exit code %2.
+
+
+
+
+ QObject
+
+
+ %1 (%2)
+
+
+
+
+ Requirements checking for module <i>%1</i> is complete.
+
+
+
+
+ unknown
+
+
+
+
+ extended
+
+
+
+
+ unformatted
+
+
+
+
+ swap
+
+
+
+
+ Default Keyboard Model
+
+
+
+
+
+ Default
+
+
+
+
+
+
+
+ File not found
+
+
+
+
+ Path <pre>%1</pre> must be an absolute path.
+
+
+
+
+ Could not create new random file <pre>%1</pre>.
+
+
+
+
+ No product
+
+
+
+
+ No description provided.
+
+
+
+
+ (no mount point)
+
+
+
+
+ Unpartitioned space or unknown partition table
+
+
+
+
+ RemoveUserJob
+
+
+ Remove live user from target system
+
+
+
+
+ RemoveVolumeGroupJob
+
+
+
+ Remove Volume Group named %1.
+
+
+
+
+ Remove Volume Group named <strong>%1</strong>.
+
+
+
+
+ The installer failed to remove a volume group named '%1'.
+
+
+
+
+ ReplaceWidget
+
+
+ Form
+
+
+
+
+ Select where to install %1.<br/><font color="red">Warning: </font>this will delete all files on the selected partition.
+
+
+
+
+ The selected item does not appear to be a valid partition.
+
+
+
+
+ %1 cannot be installed on empty space. Please select an existing partition.
+
+
+
+
+ %1 cannot be installed on an extended partition. Please select an existing primary or logical partition.
+
+
+
+
+ %1 cannot be installed on this partition.
+
+
+
+
+ Data partition (%1)
+
+
+
+
+ Unknown system partition (%1)
+
+
+
+
+ %1 system partition (%2)
+
+
+
+
+ <strong>%4</strong><br/><br/>The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.
+
+
+
+
+ <strong>%2</strong><br/><br/>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.
+
+
+
+
+
+
+ <strong>%3</strong><br/><br/>%1 will be installed on %2.<br/><font color="red">Warning: </font>all data on partition %2 will be lost.
+
+
+
+
+ The EFI system partition at %1 will be used for starting %2.
+
+
+
+
+ EFI system partition:
+
+
+
+
+ ResizeFSJob
+
+
+ Resize Filesystem Job
+
+
+
+
+ Invalid configuration
+
+
+
+
+ The file-system resize job has an invalid configuration and will not run.
+
+
+
+
+ KPMCore not Available
+
+
+
+
+ Calamares cannot start KPMCore for the file-system resize job.
+
+
+
+
+
+
+
+
+ Resize Failed
+
+
+
+
+ The filesystem %1 could not be found in this system, and cannot be resized.
+
+
+
+
+ The device %1 could not be found in this system, and cannot be resized.
+
+
+
+
+
+ The filesystem %1 cannot be resized.
+
+
+
+
+
+ The device %1 cannot be resized.
+
+
+
+
+ The filesystem %1 must be resized, but cannot.
+
+
+
+
+ The device %1 must be resized, but cannot
+
+
+
+
+ ResizePartitionJob
+
+
+ Resize partition %1.
+
+
+
+
+ Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>.
+
+
+
+
+ Resizing %2MiB partition %1 to %3MiB.
+
+
+
+
+ The installer failed to resize partition %1 on disk '%2'.
+
+
+
+
+ ResizeVolumeGroupDialog
+
+
+ Resize Volume Group
+
+
+
+
+ ResizeVolumeGroupJob
+
+
+
+ Resize volume group named %1 from %2 to %3.
+
+
+
+
+ Resize volume group named <strong>%1</strong> from <strong>%2</strong> to <strong>%3</strong>.
+
+
+
+
+ The installer failed to resize a volume group named '%1'.
+
+
+
+
+ ResultsListDialog
+
+
+ For best results, please ensure that this computer:
+
+
+
+
+ System requirements
+
+
+
+
+ ResultsListWidget
+
+
+ This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.
+
+
+
+
+ This program will ask you some questions and set up %2 on your computer.
+
+
+
+
+ ScanningDialog
+
+
+ Scanning storage devices...
+
+
+
+
+ Partitioning
+
+
+
+
+ SetHostNameJob
+
+
+ Set hostname %1
+
+
+
+
+ Set hostname <strong>%1</strong>.
+
+
+
+
+ Setting hostname %1.
+
+
+
+
+
+ Internal Error
+
+
+
+
+
+ Cannot write hostname to target system
+
+
+
+
+ SetKeyboardLayoutJob
+
+
+ Set keyboard model to %1, layout to %2-%3
+
+
+
+
+ Failed to write keyboard configuration for the virtual console.
+
+
+
+
+
+
+ Failed to write to %1
+
+
+
+
+ Failed to write keyboard configuration for X11.
+
+
+
+
+ Failed to write keyboard configuration to existing /etc/default directory.
+
+
+
+
+ SetPartFlagsJob
+
+
+ Set flags on partition %1.
+
+
+
+
+ Set flags on %1MiB %2 partition.
+
+
+
+
+ Set flags on new partition.
+
+
+
+
+ Clear flags on partition <strong>%1</strong>.
+
+
+
+
+ Clear flags on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Clear flags on new partition.
+
+
+
+
+ Flag partition <strong>%1</strong> as <strong>%2</strong>.
+
+
+
+
+ Flag %1MiB <strong>%2</strong> partition as <strong>%3</strong>.
+
+
+
+
+ Flag new partition as <strong>%1</strong>.
+
+
+
+
+ Clearing flags on partition <strong>%1</strong>.
+
+
+
+
+ Clearing flags on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Clearing flags on new partition.
+
+
+
+
+ Setting flags <strong>%2</strong> on partition <strong>%1</strong>.
+
+
+
+
+ Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Setting flags <strong>%1</strong> on new partition.
+
+
+
+
+ The installer failed to set flags on partition %1.
+
+
+
+
+ SetPasswordJob
+
+
+ Set password for user %1
+
+
+
+
+ Setting password for user %1.
+
+
+
+
+ Bad destination system path.
+
+
+
+
+ rootMountPoint is %1
+
+
+
+
+ Cannot disable root account.
+
+
+
+
+ passwd terminated with error code %1.
+
+
+
+
+ Cannot set password for user %1.
+
+
+
+
+ usermod terminated with error code %1.
+
+
+
+
+ SetTimezoneJob
+
+
+ Set timezone to %1/%2
+
+
+
+
+ Cannot access selected timezone path.
+
+
+
+
+ Bad path: %1
+
+
+
+
+ Cannot set timezone.
+
+
+
+
+ Link creation failed, target: %1; link name: %2
+
+
+
+
+ Cannot set timezone,
+
+
+
+
+ Cannot open /etc/timezone for writing
+
+
+
+
+ ShellProcessJob
+
+
+ Shell Processes Job
+
+
+
+
+ SlideCounter
+
+
+ %L1 / %L2
+ slide counter, %1 of %2 (numeric)
+
+
+
+
+ SummaryPage
+
+
+ This is an overview of what will happen once you start the setup procedure.
+
+
+
+
+ This is an overview of what will happen once you start the install procedure.
+
+
+
+
+ SummaryViewStep
+
+
+ Summary
+
+
+
+
+ TrackingInstallJob
+
+
+ Installation feedback
+
+
+
+
+ Sending installation feedback.
+
+
+
+
+ Internal error in install-tracking.
+
+
+
+
+ HTTP request timed out.
+
+
+
+
+ TrackingMachineNeonJob
+
+
+ Machine feedback
+
+
+
+
+ Configuring machine feedback.
+
+
+
+
+
+ Error in machine feedback configuration.
+
+
+
+
+ Could not configure machine feedback correctly, script error %1.
+
+
+
+
+ Could not configure machine feedback correctly, Calamares error %1.
+
+
+
+
+ TrackingPage
+
+
+ Form
+
+
+
+
+ Placeholder
+
+
+
+
+ <html><head/><body><p>By selecting this, you will send <span style=" font-weight:600;">no information at all</span> about your installation.</p></body></html>
+
+
+
+
+ <html><head/><body><p><a href="placeholder"><span style=" text-decoration: underline; color:#2980b9;">Click here for more information about user feedback</span></a></p></body></html>
+
+
+
+
+ Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.
+
+
+
+
+ By selecting this you will send information about your installation and hardware. This information will <b>only be sent once</b> after the installation finishes.
+
+
+
+
+ By selecting this you will <b>periodically</b> send information about your installation, hardware and applications, to %1.
+
+
+
+
+ By selecting this you will <b>regularly</b> send information about your installation, hardware, applications and usage patterns, to %1.
+
+
+
+
+ TrackingViewStep
+
+
+ Feedback
+
+
+
+
+ UsersPage
+
+
+ <small>If more than one person will use this computer, you can create multiple accounts after setup.</small>
+
+
+
+
+ <small>If more than one person will use this computer, you can create multiple accounts after installation.</small>
+
+
+
+
+ Your username is too long.
+
+
+
+
+ Your username must start with a lowercase letter or underscore.
+
+
+
+
+ Only lowercase letters, numbers, underscore and hyphen are allowed.
+
+
+
+
+ Your hostname is too short.
+
+
+
+
+ Your hostname is too long.
+
+
+
+
+ Only letters, numbers, underscore and hyphen are allowed.
+
+
+
+
+ Your passwords do not match!
+
+
+
+
+ UsersViewStep
+
+
+ Users
+
+
+
+
+ VariantModel
+
+
+ Key
+
+
+
+
+ Value
+
+
+
+
+ VolumeGroupBaseDialog
+
+
+ Create Volume Group
+
+
+
+
+ List of Physical Volumes
+
+
+
+
+ Volume Group Name:
+
+
+
+
+ Volume Group Type:
+
+
+
+
+ Physical Extent Size:
+
+
+
+
+ MiB
+
+
+
+
+ Total Size:
+
+
+
+
+ Used Size:
+
+
+
+
+ Total Sectors:
+
+
+
+
+ Quantity of LVs:
+
+
+
+
+ WelcomePage
+
+
+ Form
+
+
+
+
+
+ Select application and system language
+
+
+
+
+ &About
+
+
+
+
+ Open donations website
+
+
+
+
+ &Donate
+
+
+
+
+ Open help and support website
+
+
+
+
+ &Support
+
+
+
+
+ Open issues and bug-tracking website
+
+
+
+
+ &Known issues
+
+
+
+
+ Open release notes website
+
+
+
+
+ &Release notes
+
+
+
+
+ <h1>Welcome to the Calamares setup program for %1.</h1>
+
+
+
+
+ <h1>Welcome to %1 setup.</h1>
+
+
+
+
+ <h1>Welcome to the Calamares installer for %1.</h1>
+
+
+
+
+ <h1>Welcome to the %1 installer.</h1>
+
+
+
+
+ %1 support
+
+
+
+
+ About %1 setup
+
+
+
+
+ About %1 installer
+
+
+
+
+ <h1>%1</h1><br/><strong>%2<br/>for %3</strong><br/><br/>Copyright 2014-2017 Teo Mrnjavac <teo@kde.org><br/>Copyright 2017-2020 Adriaan de Groot <groot@kde.org><br/>Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.
+
+
+
+
+ WelcomeQmlViewStep
+
+
+ Welcome
+
+
+
+
+ WelcomeViewStep
+
+
+ Welcome
+
+
+
+
+ about
+
+
+ <h1>%1</h1><br/>
+ <strong>%2<br/>
+ for %3</strong><br/><br/>
+ Copyright 2014-2017 Teo Mrnjavac <teo@kde.org><br/>
+ Copyright 2017-2020 Adriaan de Groot <groot@kde.org><br/>
+ Thanks to <a href='https://calamares.io/team/'>the Calamares team</a>
+ and the <a href='https://www.transifex.com/calamares/calamares/'>Calamares
+ translators team</a>.<br/><br/>
+ <a href='https://calamares.io/'>Calamares</a>
+ development is sponsored by <br/>
+ <a href='http://www.blue-systems.com/'>Blue Systems</a> -
+ Liberating Software.
+
+
+
+
+ Back
+
+
+
+
+ keyboardq
+
+
+ Keyboard Model
+
+
+
+
+ Pick your preferred keyboard model or use the default one based on the detected hardware
+
+
+
+
+ Refresh
+
+
+
+
+
+ Layouts
+
+
+
+
+
+ Keyboard Layout
+
+
+
+
+ Models
+
+
+
+
+ Variants
+
+
+
+
+ Test your keyboard
+
+
+
+
+ notesqml
+
+
+ <h3>%1</h3>
+ <p>These are example release notes.</p>
+
+
+
+
+ release_notes
+
+
+ <h3>%1</h3>
+ <p>This an example QML file, showing options in RichText with Flickable content.</p>
+
+ <p>QML with RichText can use HTML tags, Flickable content is useful for touchscreens.</p>
+
+ <p><b>This is bold text</b></p>
+ <p><i>This is italic text</i></p>
+ <p><u>This is underlined text</u></p>
+ <p><center>This text will be center-aligned.</center></p>
+ <p><s>This is strikethrough</s></p>
+
+ <p>Code example:
+ <code>ls -l /home</code></p>
+
+ <p><b>Lists:</b></p>
+ <ul>
+ <li>Intel CPU systems</li>
+ <li>AMD CPU systems</li>
+ </ul>
+
+ <p>The vertical scrollbar is adjustable, current width set to 10.</p>
+
+
+
+
+ Back
+
+
+
+
+ welcomeq
+
+
+ <h3>Welcome to the %1 <quote>%2</quote> installer</h3>
+ <p>This program will ask you some questions and set up %1 on your computer.</p>
+
+
+
+
+ About
+
+
+
+
+ Support
+
+
+
+
+ Known issues
+
+
+
+
+ Release notes
+
+
+
+
+ Donate
+
+
+
+
diff --git a/lang/calamares_az_AZ.ts b/lang/calamares_az_AZ.ts
new file mode 100644
index 000000000..65191f080
--- /dev/null
+++ b/lang/calamares_az_AZ.ts
@@ -0,0 +1,3827 @@
+
+
+
+
+ BootInfoWidget
+
+
+ The <strong>boot environment</strong> of this system.<br><br>Older x86 systems only support <strong>BIOS</strong>.<br>Modern systems usually use <strong>EFI</strong>, but may also show up as BIOS if started in compatibility mode.
+
+
+
+
+ This system was started with an <strong>EFI</strong> boot environment.<br><br>To configure startup from an EFI environment, this installer must deploy a boot loader application, like <strong>GRUB</strong> or <strong>systemd-boot</strong> on an <strong>EFI System Partition</strong>. This is automatic, unless you choose manual partitioning, in which case you must choose it or create it on your own.
+
+
+
+
+ This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.
+
+
+
+
+ BootLoaderModel
+
+
+ Master Boot Record of %1
+
+
+
+
+ Boot Partition
+
+
+
+
+ System Partition
+
+
+
+
+ Do not install a boot loader
+
+
+
+
+ %1 (%2)
+
+
+
+
+ Calamares::BlankViewStep
+
+
+ Blank Page
+
+
+
+
+ Calamares::DebugWindow
+
+
+ Form
+
+
+
+
+ GlobalStorage
+
+
+
+
+ JobQueue
+
+
+
+
+ Modules
+
+
+
+
+ Type:
+
+
+
+
+
+ none
+
+
+
+
+ Interface:
+
+
+
+
+ Tools
+
+
+
+
+ Reload Stylesheet
+
+
+
+
+ Widget Tree
+
+
+
+
+ Debug information
+
+
+
+
+ Calamares::ExecutionViewStep
+
+
+ Set up
+
+
+
+
+ Install
+
+
+
+
+ Calamares::FailJob
+
+
+ Job failed (%1)
+
+
+
+
+ Programmed job failure was explicitly requested.
+
+
+
+
+ Calamares::JobThread
+
+
+ Done
+
+
+
+
+ Calamares::NamedJob
+
+
+ Example job (%1)
+
+
+
+
+ Calamares::ProcessJob
+
+
+ Run command '%1' in target system.
+
+
+
+
+ Run command '%1'.
+
+
+
+
+ Running command %1 %2
+
+
+
+
+ Calamares::PythonJob
+
+
+ Running %1 operation.
+
+
+
+
+ Bad working directory path
+
+
+
+
+ Working directory %1 for python job %2 is not readable.
+
+
+
+
+ Bad main script file
+
+
+
+
+ Main script file %1 for python job %2 is not readable.
+
+
+
+
+ Boost.Python error in job "%1".
+
+
+
+
+ Calamares::QmlViewStep
+
+
+ Loading ...
+
+
+
+
+ QML Step <i>%1</i>.
+
+
+
+
+ Loading failed.
+
+
+
+
+ Calamares::RequirementsChecker
+
+
+ Waiting for %n module(s).
+
+
+
+
+
+
+
+ (%n second(s))
+
+
+
+
+
+
+
+ System-requirements checking is complete.
+
+
+
+
+ Calamares::ViewManager
+
+
+ Setup Failed
+
+
+
+
+ Installation Failed
+
+
+
+
+ Would you like to paste the install log to the web?
+
+
+
+
+ Error
+
+
+
+
+
+ &Yes
+
+
+
+
+
+ &No
+
+
+
+
+ &Close
+
+
+
+
+ Install Log Paste URL
+
+
+
+
+ The upload was unsuccessful. No web-paste was done.
+
+
+
+
+ Calamares Initialization Failed
+
+
+
+
+ %1 can not be installed. Calamares was unable to load all of the configured modules. This is a problem with the way Calamares is being used by the distribution.
+
+
+
+
+ <br/>The following modules could not be loaded:
+
+
+
+
+ Continue with setup?
+
+
+
+
+ Continue with installation?
+
+
+
+
+ The %1 setup program is about to make changes to your disk in order to set up %2.<br/><strong>You will not be able to undo these changes.</strong>
+
+
+
+
+ The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong>
+
+
+
+
+ &Set up now
+
+
+
+
+ &Install now
+
+
+
+
+ Go &back
+
+
+
+
+ &Set up
+
+
+
+
+ &Install
+
+
+
+
+ Setup is complete. Close the setup program.
+
+
+
+
+ The installation is complete. Close the installer.
+
+
+
+
+ Cancel setup without changing the system.
+
+
+
+
+ Cancel installation without changing the system.
+
+
+
+
+ &Next
+
+
+
+
+ &Back
+
+
+
+
+ &Done
+
+
+
+
+ &Cancel
+
+
+
+
+ Cancel setup?
+
+
+
+
+ Cancel installation?
+
+
+
+
+ Do you really want to cancel the current setup process?
+The setup program will quit and all changes will be lost.
+
+
+
+
+ Do you really want to cancel the current install process?
+The installer will quit and all changes will be lost.
+
+
+
+
+ CalamaresPython::Helper
+
+
+ Unknown exception type
+
+
+
+
+ unparseable Python error
+
+
+
+
+ unparseable Python traceback
+
+
+
+
+ Unfetchable Python error.
+
+
+
+
+ CalamaresUtils
+
+
+ Install log posted to:
+%1
+
+
+
+
+ CalamaresWindow
+
+
+ Show debug information
+
+
+
+
+ &Back
+
+
+
+
+ &Next
+
+
+
+
+ &Cancel
+
+
+
+
+ %1 Setup Program
+
+
+
+
+ %1 Installer
+
+
+
+
+ CheckerContainer
+
+
+ Gathering system information...
+
+
+
+
+ ChoicePage
+
+
+ Form
+
+
+
+
+ Select storage de&vice:
+
+
+
+
+
+
+
+ Current:
+
+
+
+
+ After:
+
+
+
+
+ <strong>Manual partitioning</strong><br/>You can create or resize partitions yourself. Having a GPT partition table and <strong>fat32 512Mb /boot partition is a must for UEFI installs</strong>, either use an existing without formatting or create one.
+
+
+
+
+ Reuse %1 as home partition for %2.
+
+
+
+
+ <strong>Select a partition to shrink, then drag the bottom bar to resize</strong>
+
+
+
+
+ %1 will be shrunk to %2MiB and a new %3MiB partition will be created for %4.
+
+
+
+
+ Boot loader location:
+
+
+
+
+ <strong>Select a partition to install on</strong>
+
+
+
+
+ An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.
+
+
+
+
+ The EFI system partition at %1 will be used for starting %2.
+
+
+
+
+ EFI system partition:
+
+
+
+
+ This storage device does not seem to have an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+
+
+
+ <strong>Erase disk</strong><br/>This will <font color="red">delete</font> all data currently present on the selected storage device.
+
+
+
+
+
+
+
+ <strong>Install alongside</strong><br/>The installer will shrink a partition to make room for %1.
+
+
+
+
+
+
+
+ <strong>Replace a partition</strong><br/>Replaces a partition with %1.
+
+
+
+
+ This storage device has %1 on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ This storage device already has an operating system on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ This storage device has multiple operating systems on it. What would you like to do?<br/>You will be able to review and confirm your choices before any change is made to the storage device.
+
+
+
+
+ No Swap
+
+
+
+
+ Reuse Swap
+
+
+
+
+ Swap (no Hibernate)
+
+
+
+
+ Swap (with Hibernate)
+
+
+
+
+ Swap to file
+
+
+
+
+ ClearMountsJob
+
+
+ Clear mounts for partitioning operations on %1
+
+
+
+
+ Clearing mounts for partitioning operations on %1.
+
+
+
+
+ Cleared all mounts for %1
+
+
+
+
+ ClearTempMountsJob
+
+
+ Clear all temporary mounts.
+
+
+
+
+ Clearing all temporary mounts.
+
+
+
+
+ Cannot get list of temporary mounts.
+
+
+
+
+ Cleared all temporary mounts.
+
+
+
+
+ CommandList
+
+
+
+ Could not run command.
+
+
+
+
+ The command runs in the host environment and needs to know the root path, but no rootMountPoint is defined.
+
+
+
+
+ The command needs to know the user's name, but no username is defined.
+
+
+
+
+ Config
+
+
+ Set keyboard model to %1.<br/>
+
+
+
+
+ Set keyboard layout to %1/%2.
+
+
+
+
+ The system language will be set to %1.
+
+
+
+
+ The numbers and dates locale will be set to %1.
+
+
+
+
+ Set timezone to %1/%2.<br/>
+
+
+
+
+ Network Installation. (Disabled: Incorrect configuration)
+
+
+
+
+ Network Installation. (Disabled: Received invalid groups data)
+
+
+
+
+ Network Installation. (Disabled: internal error)
+
+
+
+
+ Network Installation. (Disabled: Unable to fetch package lists, check your network connection)
+
+
+
+
+ This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.
+
+
+
+
+ This program will ask you some questions and set up %2 on your computer.
+
+
+
+
+ <h1>Welcome to the Calamares setup program for %1.</h1>
+
+
+
+
+ <h1>Welcome to %1 setup.</h1>
+
+
+
+
+ <h1>Welcome to the Calamares installer for %1.</h1>
+
+
+
+
+ <h1>Welcome to the %1 installer.</h1>
+
+
+
+
+ ContextualProcessJob
+
+
+ Contextual Processes Job
+
+
+
+
+ CreatePartitionDialog
+
+
+ Create a Partition
+
+
+
+
+ Si&ze:
+
+
+
+
+ MiB
+
+
+
+
+ Partition &Type:
+
+
+
+
+ &Primary
+
+
+
+
+ E&xtended
+
+
+
+
+ Fi&le System:
+
+
+
+
+ LVM LV name
+
+
+
+
+ &Mount Point:
+
+
+
+
+ Flags:
+
+
+
+
+ En&crypt
+
+
+
+
+ Logical
+
+
+
+
+ Primary
+
+
+
+
+ GPT
+
+
+
+
+ Mountpoint already in use. Please select another one.
+
+
+
+
+ CreatePartitionJob
+
+
+ Create new %2MiB partition on %4 (%3) with file system %1.
+
+
+
+
+ Create new <strong>%2MiB</strong> partition on <strong>%4</strong> (%3) with file system <strong>%1</strong>.
+
+
+
+
+ Creating new %1 partition on %2.
+
+
+
+
+ The installer failed to create partition on disk '%1'.
+
+
+
+
+ CreatePartitionTableDialog
+
+
+ Create Partition Table
+
+
+
+
+ Creating a new partition table will delete all existing data on the disk.
+
+
+
+
+ What kind of partition table do you want to create?
+
+
+
+
+ Master Boot Record (MBR)
+
+
+
+
+ GUID Partition Table (GPT)
+
+
+
+
+ CreatePartitionTableJob
+
+
+ Create new %1 partition table on %2.
+
+
+
+
+ Create new <strong>%1</strong> partition table on <strong>%2</strong> (%3).
+
+
+
+
+ Creating new %1 partition table on %2.
+
+
+
+
+ The installer failed to create a partition table on %1.
+
+
+
+
+ CreateUserJob
+
+
+ Create user %1
+
+
+
+
+ Create user <strong>%1</strong>.
+
+
+
+
+ Creating user %1.
+
+
+
+
+ Sudoers dir is not writable.
+
+
+
+
+ Cannot create sudoers file for writing.
+
+
+
+
+ Cannot chmod sudoers file.
+
+
+
+
+ Cannot open groups file for reading.
+
+
+
+
+ CreateVolumeGroupDialog
+
+
+ Create Volume Group
+
+
+
+
+ CreateVolumeGroupJob
+
+
+ Create new volume group named %1.
+
+
+
+
+ Create new volume group named <strong>%1</strong>.
+
+
+
+
+ Creating new volume group named %1.
+
+
+
+
+ The installer failed to create a volume group named '%1'.
+
+
+
+
+ DeactivateVolumeGroupJob
+
+
+
+ Deactivate volume group named %1.
+
+
+
+
+ Deactivate volume group named <strong>%1</strong>.
+
+
+
+
+ The installer failed to deactivate a volume group named %1.
+
+
+
+
+ DeletePartitionJob
+
+
+ Delete partition %1.
+
+
+
+
+ Delete partition <strong>%1</strong>.
+
+
+
+
+ Deleting partition %1.
+
+
+
+
+ The installer failed to delete partition %1.
+
+
+
+
+ DeviceInfoWidget
+
+
+ This device has a <strong>%1</strong> partition table.
+
+
+
+
+ This is a <strong>loop</strong> device.<br><br>It is a pseudo-device with no partition table that makes a file accessible as a block device. This kind of setup usually only contains a single filesystem.
+
+
+
+
+ This installer <strong>cannot detect a partition table</strong> on the selected storage device.<br><br>The device either has no partition table, or the partition table is corrupted or of an unknown type.<br>This installer can create a new partition table for you, either automatically, or through the manual partitioning page.
+
+
+
+
+ <br><br>This is the recommended partition table type for modern systems which start from an <strong>EFI</strong> boot environment.
+
+
+
+
+ <br><br>This partition table type is only advisable on older systems which start from a <strong>BIOS</strong> boot environment. GPT is recommended in most other cases.<br><br><strong>Warning:</strong> the MBR partition table is an obsolete MS-DOS era standard.<br>Only 4 <em>primary</em> partitions may be created, and of those 4, one can be an <em>extended</em> partition, which may in turn contain many <em>logical</em> partitions.
+
+
+
+
+ The type of <strong>partition table</strong> on the selected storage device.<br><br>The only way to change the partition table type is to erase and recreate the partition table from scratch, which destroys all data on the storage device.<br>This installer will keep the current partition table unless you explicitly choose otherwise.<br>If unsure, on modern systems GPT is preferred.
+
+
+
+
+ DeviceModel
+
+
+ %1 - %2 (%3)
+ device[name] - size[number] (device-node[name])
+
+
+
+
+ %1 - (%2)
+ device[name] - (device-node[name])
+
+
+
+
+ DracutLuksCfgJob
+
+
+ Write LUKS configuration for Dracut to %1
+
+
+
+
+ Skip writing LUKS configuration for Dracut: "/" partition is not encrypted
+
+
+
+
+ Failed to open %1
+
+
+
+
+ DummyCppJob
+
+
+ Dummy C++ Job
+
+
+
+
+ EditExistingPartitionDialog
+
+
+ Edit Existing Partition
+
+
+
+
+ Content:
+
+
+
+
+ &Keep
+
+
+
+
+ Format
+
+
+
+
+ Warning: Formatting the partition will erase all existing data.
+
+
+
+
+ &Mount Point:
+
+
+
+
+ Si&ze:
+
+
+
+
+ MiB
+
+
+
+
+ Fi&le System:
+
+
+
+
+ Flags:
+
+
+
+
+ Mountpoint already in use. Please select another one.
+
+
+
+
+ EncryptWidget
+
+
+ Form
+
+
+
+
+ En&crypt system
+
+
+
+
+ Passphrase
+
+
+
+
+ Confirm passphrase
+
+
+
+
+ Please enter the same passphrase in both boxes.
+
+
+
+
+ FillGlobalStorageJob
+
+
+ Set partition information
+
+
+
+
+ Install %1 on <strong>new</strong> %2 system partition.
+
+
+
+
+ Set up <strong>new</strong> %2 partition with mount point <strong>%1</strong>.
+
+
+
+
+ Install %2 on %3 system partition <strong>%1</strong>.
+
+
+
+
+ Set up %3 partition <strong>%1</strong> with mount point <strong>%2</strong>.
+
+
+
+
+ Install boot loader on <strong>%1</strong>.
+
+
+
+
+ Setting up mount points.
+
+
+
+
+ FinishedPage
+
+
+ Form
+
+
+
+
+ &Restart now
+
+
+
+
+ <h1>All done.</h1><br/>%1 has been set up on your computer.<br/>You may now start using your new system.
+
+
+
+
+ <html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the setup program.</p></body></html>
+
+
+
+
+ <h1>All done.</h1><br/>%1 has been installed on your computer.<br/>You may now restart into your new system, or continue using the %2 Live environment.
+
+
+
+
+ <html><head/><body><p>When this box is checked, your system will restart immediately when you click on <span style="font-style:italic;">Done</span> or close the installer.</p></body></html>
+
+
+
+
+ <h1>Setup Failed</h1><br/>%1 has not been set up on your computer.<br/>The error message was: %2.
+
+
+
+
+ <h1>Installation Failed</h1><br/>%1 has not been installed on your computer.<br/>The error message was: %2.
+
+
+
+
+ FinishedViewStep
+
+
+ Finish
+
+
+
+
+ Setup Complete
+
+
+
+
+ Installation Complete
+
+
+
+
+ The setup of %1 is complete.
+
+
+
+
+ The installation of %1 is complete.
+
+
+
+
+ FormatPartitionJob
+
+
+ Format partition %1 (file system: %2, size: %3 MiB) on %4.
+
+
+
+
+ Format <strong>%3MiB</strong> partition <strong>%1</strong> with file system <strong>%2</strong>.
+
+
+
+
+ Formatting partition %1 with file system %2.
+
+
+
+
+ The installer failed to format partition %1 on disk '%2'.
+
+
+
+
+ GeneralRequirements
+
+
+ has at least %1 GiB available drive space
+
+
+
+
+ There is not enough drive space. At least %1 GiB is required.
+
+
+
+
+ has at least %1 GiB working memory
+
+
+
+
+ The system does not have enough working memory. At least %1 GiB is required.
+
+
+
+
+ is plugged in to a power source
+
+
+
+
+ The system is not plugged in to a power source.
+
+
+
+
+ is connected to the Internet
+
+
+
+
+ The system is not connected to the Internet.
+
+
+
+
+ is running the installer as an administrator (root)
+
+
+
+
+ The setup program is not running with administrator rights.
+
+
+
+
+ The installer is not running with administrator rights.
+
+
+
+
+ has a screen large enough to show the whole installer
+
+
+
+
+ The screen is too small to display the setup program.
+
+
+
+
+ The screen is too small to display the installer.
+
+
+
+
+ HostInfoJob
+
+
+ Collecting information about your machine.
+
+
+
+
+ IDJob
+
+
+
+
+
+ OEM Batch Identifier
+
+
+
+
+ Could not create directories <code>%1</code>.
+
+
+
+
+ Could not open file <code>%1</code>.
+
+
+
+
+ Could not write to file <code>%1</code>.
+
+
+
+
+ InitcpioJob
+
+
+ Creating initramfs with mkinitcpio.
+
+
+
+
+ InitramfsJob
+
+
+ Creating initramfs.
+
+
+
+
+ InteractiveTerminalPage
+
+
+ Konsole not installed
+
+
+
+
+ Please install KDE Konsole and try again!
+
+
+
+
+ Executing script: <code>%1</code>
+
+
+
+
+ InteractiveTerminalViewStep
+
+
+ Script
+
+
+
+
+ KeyboardPage
+
+
+ Set keyboard model to %1.<br/>
+
+
+
+
+ Set keyboard layout to %1/%2.
+
+
+
+
+ KeyboardQmlViewStep
+
+
+ Keyboard
+
+
+
+
+ KeyboardViewStep
+
+
+ Keyboard
+
+
+
+
+ LCLocaleDialog
+
+
+ System locale setting
+
+
+
+
+ The system locale setting affects the language and character set for some command line user interface elements.<br/>The current setting is <strong>%1</strong>.
+
+
+
+
+ &Cancel
+
+
+
+
+ &OK
+
+
+
+
+ LicensePage
+
+
+ Form
+
+
+
+
+ <h1>License Agreement</h1>
+
+
+
+
+ I accept the terms and conditions above.
+
+
+
+
+ Please review the End User License Agreements (EULAs).
+
+
+
+
+ This setup procedure will install proprietary software that is subject to licensing terms.
+
+
+
+
+ If you do not agree with the terms, the setup procedure cannot continue.
+
+
+
+
+ This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.
+
+
+
+
+ If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.
+
+
+
+
+ LicenseViewStep
+
+
+ License
+
+
+
+
+ LicenseWidget
+
+
+ URL: %1
+
+
+
+
+ <strong>%1 driver</strong><br/>by %2
+ %1 is an untranslatable product name, example: Creative Audigy driver
+
+
+
+
+ <strong>%1 graphics driver</strong><br/><font color="Grey">by %2</font>
+ %1 is usually a vendor name, example: Nvidia graphics driver
+
+
+
+
+ <strong>%1 browser plugin</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1 codec</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1 package</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ <strong>%1</strong><br/><font color="Grey">by %2</font>
+
+
+
+
+ File: %1
+
+
+
+
+ Hide license text
+
+
+
+
+ Show the license text
+
+
+
+
+ Open license agreement in browser.
+
+
+
+
+ LocalePage
+
+
+ Region:
+
+
+
+
+ Zone:
+
+
+
+
+
+ &Change...
+
+
+
+
+ The system language will be set to %1.
+
+
+
+
+ The numbers and dates locale will be set to %1.
+
+
+
+
+ Set timezone to %1/%2.<br/>
+
+
+
+
+ LocaleQmlViewStep
+
+
+ Location
+
+
+
+
+ LocaleViewStep
+
+
+ Location
+
+
+
+
+ LuksBootKeyFileJob
+
+
+ Configuring LUKS key file.
+
+
+
+
+
+ No partitions are defined.
+
+
+
+
+
+
+ Encrypted rootfs setup error
+
+
+
+
+ Root partition %1 is LUKS but no passphrase has been set.
+
+
+
+
+ Could not create LUKS key file for root partition %1.
+
+
+
+
+ Could not configure LUKS key file on partition %1.
+
+
+
+
+ MachineIdJob
+
+
+ Generate machine-id.
+
+
+
+
+ Configuration Error
+
+
+
+
+ No root mount point is set for MachineId.
+
+
+
+
+ NetInstallViewStep
+
+
+
+ Package selection
+
+
+
+
+ Office software
+
+
+
+
+ Office package
+
+
+
+
+ Browser software
+
+
+
+
+ Browser package
+
+
+
+
+ Web browser
+
+
+
+
+ Kernel
+
+
+
+
+ Services
+
+
+
+
+ Login
+
+
+
+
+ Desktop
+
+
+
+
+ Applications
+
+
+
+
+ Communication
+
+
+
+
+ Development
+
+
+
+
+ Office
+
+
+
+
+ Multimedia
+
+
+
+
+ Internet
+
+
+
+
+ Theming
+
+
+
+
+ Gaming
+
+
+
+
+ Utilities
+
+
+
+
+ NotesQmlViewStep
+
+
+ Notes
+
+
+
+
+ OEMPage
+
+
+ Ba&tch:
+
+
+
+
+ <html><head/><body><p>Enter a batch-identifier here. This will be stored in the target system.</p></body></html>
+
+
+
+
+ <html><head/><body><h1>OEM Configuration</h1><p>Calamares will use OEM settings while configuring the target system.</p></body></html>
+
+
+
+
+ OEMViewStep
+
+
+ OEM Configuration
+
+
+
+
+ Set the OEM Batch Identifier to <code>%1</code>.
+
+
+
+
+ PWQ
+
+
+ Password is too short
+
+
+
+
+ Password is too long
+
+
+
+
+ Password is too weak
+
+
+
+
+ Memory allocation error when setting '%1'
+
+
+
+
+ Memory allocation error
+
+
+
+
+ The password is the same as the old one
+
+
+
+
+ The password is a palindrome
+
+
+
+
+ The password differs with case changes only
+
+
+
+
+ The password is too similar to the old one
+
+
+
+
+ The password contains the user name in some form
+
+
+
+
+ The password contains words from the real name of the user in some form
+
+
+
+
+ The password contains forbidden words in some form
+
+
+
+
+ The password contains less than %1 digits
+
+
+
+
+ The password contains too few digits
+
+
+
+
+ The password contains less than %1 uppercase letters
+
+
+
+
+ The password contains too few uppercase letters
+
+
+
+
+ The password contains less than %1 lowercase letters
+
+
+
+
+ The password contains too few lowercase letters
+
+
+
+
+ The password contains less than %1 non-alphanumeric characters
+
+
+
+
+ The password contains too few non-alphanumeric characters
+
+
+
+
+ The password is shorter than %1 characters
+
+
+
+
+ The password is too short
+
+
+
+
+ The password is just rotated old one
+
+
+
+
+ The password contains less than %1 character classes
+
+
+
+
+ The password does not contain enough character classes
+
+
+
+
+ The password contains more than %1 same characters consecutively
+
+
+
+
+ The password contains too many same characters consecutively
+
+
+
+
+ The password contains more than %1 characters of the same class consecutively
+
+
+
+
+ The password contains too many characters of the same class consecutively
+
+
+
+
+ The password contains monotonic sequence longer than %1 characters
+
+
+
+
+ The password contains too long of a monotonic character sequence
+
+
+
+
+ No password supplied
+
+
+
+
+ Cannot obtain random numbers from the RNG device
+
+
+
+
+ Password generation failed - required entropy too low for settings
+
+
+
+
+ The password fails the dictionary check - %1
+
+
+
+
+ The password fails the dictionary check
+
+
+
+
+ Unknown setting - %1
+
+
+
+
+ Unknown setting
+
+
+
+
+ Bad integer value of setting - %1
+
+
+
+
+ Bad integer value
+
+
+
+
+ Setting %1 is not of integer type
+
+
+
+
+ Setting is not of integer type
+
+
+
+
+ Setting %1 is not of string type
+
+
+
+
+ Setting is not of string type
+
+
+
+
+ Opening the configuration file failed
+
+
+
+
+ The configuration file is malformed
+
+
+
+
+ Fatal failure
+
+
+
+
+ Unknown error
+
+
+
+
+ Password is empty
+
+
+
+
+ PackageChooserPage
+
+
+ Form
+
+
+
+
+ Product Name
+
+
+
+
+ TextLabel
+
+
+
+
+ Long Product Description
+
+
+
+
+ Package Selection
+
+
+
+
+ Please pick a product from the list. The selected product will be installed.
+
+
+
+
+ PackageChooserViewStep
+
+
+ Packages
+
+
+
+
+ PackageModel
+
+
+ Name
+
+
+
+
+ Description
+
+
+
+
+ Page_Keyboard
+
+
+ Form
+
+
+
+
+ Keyboard Model:
+
+
+
+
+ Type here to test your keyboard
+
+
+
+
+ Page_UserSetup
+
+
+ Form
+
+
+
+
+ What is your name?
+
+
+
+
+ Your Full Name
+
+
+
+
+ What name do you want to use to log in?
+
+
+
+
+ login
+
+
+
+
+ What is the name of this computer?
+
+
+
+
+ <small>This name will be used if you make the computer visible to others on a network.</small>
+
+
+
+
+ Computer Name
+
+
+
+
+ Choose a password to keep your account safe.
+
+
+
+
+
+ <small>Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.</small>
+
+
+
+
+
+ Password
+
+
+
+
+
+ Repeat Password
+
+
+
+
+ When this box is checked, password-strength checking is done and you will not be able to use a weak password.
+
+
+
+
+ Require strong passwords.
+
+
+
+
+ Log in automatically without asking for the password.
+
+
+
+
+ Use the same password for the administrator account.
+
+
+
+
+ Choose a password for the administrator account.
+
+
+
+
+
+ <small>Enter the same password twice, so that it can be checked for typing errors.</small>
+
+
+
+
+ PartitionLabelsView
+
+
+ Root
+
+
+
+
+ Home
+
+
+
+
+ Boot
+
+
+
+
+ EFI system
+
+
+
+
+ Swap
+
+
+
+
+ New partition for %1
+
+
+
+
+ New partition
+
+
+
+
+ %1 %2
+ size[number] filesystem[name]
+
+
+
+
+ PartitionModel
+
+
+
+ Free Space
+
+
+
+
+
+ New partition
+
+
+
+
+ Name
+
+
+
+
+ File System
+
+
+
+
+ Mount Point
+
+
+
+
+ Size
+
+
+
+
+ PartitionPage
+
+
+ Form
+
+
+
+
+ Storage de&vice:
+
+
+
+
+ &Revert All Changes
+
+
+
+
+ New Partition &Table
+
+
+
+
+ Cre&ate
+
+
+
+
+ &Edit
+
+
+
+
+ &Delete
+
+
+
+
+ New Volume Group
+
+
+
+
+ Resize Volume Group
+
+
+
+
+ Deactivate Volume Group
+
+
+
+
+ Remove Volume Group
+
+
+
+
+ I&nstall boot loader on:
+
+
+
+
+ Are you sure you want to create a new partition table on %1?
+
+
+
+
+ Can not create new partition
+
+
+
+
+ The partition table on %1 already has %2 primary partitions, and no more can be added. Please remove one primary partition and add an extended partition, instead.
+
+
+
+
+ PartitionViewStep
+
+
+ Gathering system information...
+
+
+
+
+ Partitions
+
+
+
+
+ Install %1 <strong>alongside</strong> another operating system.
+
+
+
+
+ <strong>Erase</strong> disk and install %1.
+
+
+
+
+ <strong>Replace</strong> a partition with %1.
+
+
+
+
+ <strong>Manual</strong> partitioning.
+
+
+
+
+ Install %1 <strong>alongside</strong> another operating system on disk <strong>%2</strong> (%3).
+
+
+
+
+ <strong>Erase</strong> disk <strong>%2</strong> (%3) and install %1.
+
+
+
+
+ <strong>Replace</strong> a partition on disk <strong>%2</strong> (%3) with %1.
+
+
+
+
+ <strong>Manual</strong> partitioning on disk <strong>%1</strong> (%2).
+
+
+
+
+ Disk <strong>%1</strong> (%2)
+
+
+
+
+ Current:
+
+
+
+
+ After:
+
+
+
+
+ No EFI system partition configured
+
+
+
+
+ An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a FAT32 filesystem with the <strong>%3</strong> flag enabled and mount point <strong>%2</strong>.<br/><br/>You can continue without setting up an EFI system partition but your system may fail to start.
+
+
+
+
+ An EFI system partition is necessary to start %1.<br/><br/>A partition was configured with mount point <strong>%2</strong> but its <strong>%3</strong> flag is not set.<br/>To set the flag, go back and edit the partition.<br/><br/>You can continue without setting the flag but your system may fail to start.
+
+
+
+
+ EFI system partition flag not set
+
+
+
+
+ Option to use GPT on BIOS
+
+
+
+
+ A GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too.<br/><br/>To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the <strong>bios_grub</strong> flag enabled.<br/><br/>An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT.
+
+
+
+
+ Boot partition not encrypted
+
+
+
+
+ A separate boot partition was set up together with an encrypted root partition, but the boot partition is not encrypted.<br/><br/>There are security concerns with this kind of setup, because important system files are kept on an unencrypted partition.<br/>You may continue if you wish, but filesystem unlocking will happen later during system startup.<br/>To encrypt the boot partition, go back and recreate it, selecting <strong>Encrypt</strong> in the partition creation window.
+
+
+
+
+ has at least one disk device available.
+
+
+
+
+ There are no partitions to install on.
+
+
+
+
+ PlasmaLnfJob
+
+
+ Plasma Look-and-Feel Job
+
+
+
+
+
+ Could not select KDE Plasma Look-and-Feel package
+
+
+
+
+ PlasmaLnfPage
+
+
+ Form
+
+
+
+
+ Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is set up. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.
+
+
+
+
+ Please choose a look-and-feel for the KDE Plasma Desktop. You can also skip this step and configure the look-and-feel once the system is installed. Clicking on a look-and-feel selection will give you a live preview of that look-and-feel.
+
+
+
+
+ PlasmaLnfViewStep
+
+
+ Look-and-Feel
+
+
+
+
+ PreserveFiles
+
+
+ Saving files for later ...
+
+
+
+
+ No files configured to save for later.
+
+
+
+
+ Not all of the configured files could be preserved.
+
+
+
+
+ ProcessResult
+
+
+
+There was no output from the command.
+
+
+
+
+
+Output:
+
+
+
+
+
+ External command crashed.
+
+
+
+
+ Command <i>%1</i> crashed.
+
+
+
+
+ External command failed to start.
+
+
+
+
+ Command <i>%1</i> failed to start.
+
+
+
+
+ Internal error when starting command.
+
+
+
+
+ Bad parameters for process job call.
+
+
+
+
+ External command failed to finish.
+
+
+
+
+ Command <i>%1</i> failed to finish in %2 seconds.
+
+
+
+
+ External command finished with errors.
+
+
+
+
+ Command <i>%1</i> finished with exit code %2.
+
+
+
+
+ QObject
+
+
+ %1 (%2)
+
+
+
+
+ Requirements checking for module <i>%1</i> is complete.
+
+
+
+
+ unknown
+
+
+
+
+ extended
+
+
+
+
+ unformatted
+
+
+
+
+ swap
+
+
+
+
+ Default Keyboard Model
+
+
+
+
+
+ Default
+
+
+
+
+
+
+
+ File not found
+
+
+
+
+ Path <pre>%1</pre> must be an absolute path.
+
+
+
+
+ Could not create new random file <pre>%1</pre>.
+
+
+
+
+ No product
+
+
+
+
+ No description provided.
+
+
+
+
+ (no mount point)
+
+
+
+
+ Unpartitioned space or unknown partition table
+
+
+
+
+ RemoveUserJob
+
+
+ Remove live user from target system
+
+
+
+
+ RemoveVolumeGroupJob
+
+
+
+ Remove Volume Group named %1.
+
+
+
+
+ Remove Volume Group named <strong>%1</strong>.
+
+
+
+
+ The installer failed to remove a volume group named '%1'.
+
+
+
+
+ ReplaceWidget
+
+
+ Form
+
+
+
+
+ Select where to install %1.<br/><font color="red">Warning: </font>this will delete all files on the selected partition.
+
+
+
+
+ The selected item does not appear to be a valid partition.
+
+
+
+
+ %1 cannot be installed on empty space. Please select an existing partition.
+
+
+
+
+ %1 cannot be installed on an extended partition. Please select an existing primary or logical partition.
+
+
+
+
+ %1 cannot be installed on this partition.
+
+
+
+
+ Data partition (%1)
+
+
+
+
+ Unknown system partition (%1)
+
+
+
+
+ %1 system partition (%2)
+
+
+
+
+ <strong>%4</strong><br/><br/>The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.
+
+
+
+
+ <strong>%2</strong><br/><br/>An EFI system partition cannot be found anywhere on this system. Please go back and use manual partitioning to set up %1.
+
+
+
+
+
+
+ <strong>%3</strong><br/><br/>%1 will be installed on %2.<br/><font color="red">Warning: </font>all data on partition %2 will be lost.
+
+
+
+
+ The EFI system partition at %1 will be used for starting %2.
+
+
+
+
+ EFI system partition:
+
+
+
+
+ ResizeFSJob
+
+
+ Resize Filesystem Job
+
+
+
+
+ Invalid configuration
+
+
+
+
+ The file-system resize job has an invalid configuration and will not run.
+
+
+
+
+ KPMCore not Available
+
+
+
+
+ Calamares cannot start KPMCore for the file-system resize job.
+
+
+
+
+
+
+
+
+ Resize Failed
+
+
+
+
+ The filesystem %1 could not be found in this system, and cannot be resized.
+
+
+
+
+ The device %1 could not be found in this system, and cannot be resized.
+
+
+
+
+
+ The filesystem %1 cannot be resized.
+
+
+
+
+
+ The device %1 cannot be resized.
+
+
+
+
+ The filesystem %1 must be resized, but cannot.
+
+
+
+
+ The device %1 must be resized, but cannot
+
+
+
+
+ ResizePartitionJob
+
+
+ Resize partition %1.
+
+
+
+
+ Resize <strong>%2MiB</strong> partition <strong>%1</strong> to <strong>%3MiB</strong>.
+
+
+
+
+ Resizing %2MiB partition %1 to %3MiB.
+
+
+
+
+ The installer failed to resize partition %1 on disk '%2'.
+
+
+
+
+ ResizeVolumeGroupDialog
+
+
+ Resize Volume Group
+
+
+
+
+ ResizeVolumeGroupJob
+
+
+
+ Resize volume group named %1 from %2 to %3.
+
+
+
+
+ Resize volume group named <strong>%1</strong> from <strong>%2</strong> to <strong>%3</strong>.
+
+
+
+
+ The installer failed to resize a volume group named '%1'.
+
+
+
+
+ ResultsListDialog
+
+
+ For best results, please ensure that this computer:
+
+
+
+
+ System requirements
+
+
+
+
+ ResultsListWidget
+
+
+ This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a>
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.
+
+
+
+
+ This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.
+
+
+
+
+ This program will ask you some questions and set up %2 on your computer.
+
+
+
+
+ ScanningDialog
+
+
+ Scanning storage devices...
+
+
+
+
+ Partitioning
+
+
+
+
+ SetHostNameJob
+
+
+ Set hostname %1
+
+
+
+
+ Set hostname <strong>%1</strong>.
+
+
+
+
+ Setting hostname %1.
+
+
+
+
+
+ Internal Error
+
+
+
+
+
+ Cannot write hostname to target system
+
+
+
+
+ SetKeyboardLayoutJob
+
+
+ Set keyboard model to %1, layout to %2-%3
+
+
+
+
+ Failed to write keyboard configuration for the virtual console.
+
+
+
+
+
+
+ Failed to write to %1
+
+
+
+
+ Failed to write keyboard configuration for X11.
+
+
+
+
+ Failed to write keyboard configuration to existing /etc/default directory.
+
+
+
+
+ SetPartFlagsJob
+
+
+ Set flags on partition %1.
+
+
+
+
+ Set flags on %1MiB %2 partition.
+
+
+
+
+ Set flags on new partition.
+
+
+
+
+ Clear flags on partition <strong>%1</strong>.
+
+
+
+
+ Clear flags on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Clear flags on new partition.
+
+
+
+
+ Flag partition <strong>%1</strong> as <strong>%2</strong>.
+
+
+
+
+ Flag %1MiB <strong>%2</strong> partition as <strong>%3</strong>.
+
+
+
+
+ Flag new partition as <strong>%1</strong>.
+
+
+
+
+ Clearing flags on partition <strong>%1</strong>.
+
+
+
+
+ Clearing flags on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Clearing flags on new partition.
+
+
+
+
+ Setting flags <strong>%2</strong> on partition <strong>%1</strong>.
+
+
+
+
+ Setting flags <strong>%3</strong> on %1MiB <strong>%2</strong> partition.
+
+
+
+
+ Setting flags <strong>%1</strong> on new partition.
+
+
+
+
+ The installer failed to set flags on partition %1.
+
+
+
+
+ SetPasswordJob
+
+
+ Set password for user %1
+
+
+
+
+ Setting password for user %1.
+
+
+
+
+ Bad destination system path.
+
+
+
+
+ rootMountPoint is %1
+
+
+
+
+ Cannot disable root account.
+
+
+
+
+ passwd terminated with error code %1.
+
+
+
+
+ Cannot set password for user %1.
+
+
+
+
+ usermod terminated with error code %1.
+
+
+
+
+ SetTimezoneJob
+
+
+ Set timezone to %1/%2
+
+
+
+
+ Cannot access selected timezone path.
+
+
+
+
+ Bad path: %1
+
+
+
+
+ Cannot set timezone.
+
+
+
+
+ Link creation failed, target: %1; link name: %2
+
+
+
+
+ Cannot set timezone,
+
+
+
+
+ Cannot open /etc/timezone for writing
+
+
+
+
+ ShellProcessJob
+
+
+ Shell Processes Job
+
+
+
+
+ SlideCounter
+
+
+ %L1 / %L2
+ slide counter, %1 of %2 (numeric)
+
+
+
+
+ SummaryPage
+
+
+ This is an overview of what will happen once you start the setup procedure.
+
+
+
+
+ This is an overview of what will happen once you start the install procedure.
+
+
+
+
+ SummaryViewStep
+
+
+ Summary
+
+
+
+
+ TrackingInstallJob
+
+
+ Installation feedback
+
+
+
+
+ Sending installation feedback.
+
+
+
+
+ Internal error in install-tracking.
+
+
+
+
+ HTTP request timed out.
+
+
+
+
+ TrackingMachineNeonJob
+
+
+ Machine feedback
+
+
+
+
+ Configuring machine feedback.
+
+
+
+
+
+ Error in machine feedback configuration.
+
+
+
+
+ Could not configure machine feedback correctly, script error %1.
+
+
+
+
+ Could not configure machine feedback correctly, Calamares error %1.
+
+
+
+
+ TrackingPage
+
+
+ Form
+
+
+
+
+ Placeholder
+
+
+
+
+ <html><head/><body><p>By selecting this, you will send <span style=" font-weight:600;">no information at all</span> about your installation.</p></body></html>
+
+
+
+
+ <html><head/><body><p><a href="placeholder"><span style=" text-decoration: underline; color:#2980b9;">Click here for more information about user feedback</span></a></p></body></html>
+
+
+
+
+ Install tracking helps %1 to see how many users they have, what hardware they install %1 to and (with the last two options below), get continuous information about preferred applications. To see what will be sent, please click the help icon next to each area.
+
+
+
+
+ By selecting this you will send information about your installation and hardware. This information will <b>only be sent once</b> after the installation finishes.
+
+
+
+
+ By selecting this you will <b>periodically</b> send information about your installation, hardware and applications, to %1.
+
+
+
+
+ By selecting this you will <b>regularly</b> send information about your installation, hardware, applications and usage patterns, to %1.
+
+
+
+
+ TrackingViewStep
+
+
+ Feedback
+
+
+
+
+ UsersPage
+
+
+ <small>If more than one person will use this computer, you can create multiple accounts after setup.</small>
+
+
+
+
+ <small>If more than one person will use this computer, you can create multiple accounts after installation.</small>
+
+
+
+
+ Your username is too long.
+
+
+
+
+ Your username must start with a lowercase letter or underscore.
+
+
+
+
+ Only lowercase letters, numbers, underscore and hyphen are allowed.
+
+
+
+
+ Your hostname is too short.
+
+
+
+
+ Your hostname is too long.
+
+
+
+
+ Only letters, numbers, underscore and hyphen are allowed.
+
+
+
+
+ Your passwords do not match!
+
+
+
+
+ UsersViewStep
+
+
+ Users
+
+
+
+
+ VariantModel
+
+
+ Key
+
+
+
+
+ Value
+
+
+
+
+ VolumeGroupBaseDialog
+
+
+ Create Volume Group
+
+
+
+
+ List of Physical Volumes
+
+
+
+
+ Volume Group Name:
+
+
+
+
+ Volume Group Type:
+
+
+
+
+ Physical Extent Size:
+
+
+
+
+ MiB
+
+
+
+
+ Total Size:
+
+
+
+
+ Used Size:
+
+
+
+
+ Total Sectors:
+
+
+
+
+ Quantity of LVs:
+
+
+
+
+ WelcomePage
+
+
+ Form
+
+
+
+
+
+ Select application and system language
+
+
+
+
+ &About
+
+
+
+
+ Open donations website
+
+
+
+
+ &Donate
+
+
+
+
+ Open help and support website
+
+
+
+
+ &Support
+
+
+
+
+ Open issues and bug-tracking website
+
+
+
+
+ &Known issues
+
+
+
+
+ Open release notes website
+
+
+
+
+ &Release notes
+
+
+
+
+ <h1>Welcome to the Calamares setup program for %1.</h1>
+
+
+
+
+ <h1>Welcome to %1 setup.</h1>
+
+
+
+
+ <h1>Welcome to the Calamares installer for %1.</h1>
+
+
+
+
+ <h1>Welcome to the %1 installer.</h1>
+
+
+
+
+ %1 support
+
+
+
+
+ About %1 setup
+
+
+
+
+ About %1 installer
+
+
+
+
+ <h1>%1</h1><br/><strong>%2<br/>for %3</strong><br/><br/>Copyright 2014-2017 Teo Mrnjavac <teo@kde.org><br/>Copyright 2017-2020 Adriaan de Groot <groot@kde.org><br/>Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.
+
+
+
+
+ WelcomeQmlViewStep
+
+
+ Welcome
+
+
+
+
+ WelcomeViewStep
+
+
+ Welcome
+
+
+
+
+ about
+
+
+ <h1>%1</h1><br/>
+ <strong>%2<br/>
+ for %3</strong><br/><br/>
+ Copyright 2014-2017 Teo Mrnjavac <teo@kde.org><br/>
+ Copyright 2017-2020 Adriaan de Groot <groot@kde.org><br/>
+ Thanks to <a href='https://calamares.io/team/'>the Calamares team</a>
+ and the <a href='https://www.transifex.com/calamares/calamares/'>Calamares
+ translators team</a>.<br/><br/>
+ <a href='https://calamares.io/'>Calamares</a>
+ development is sponsored by <br/>
+ <a href='http://www.blue-systems.com/'>Blue Systems</a> -
+ Liberating Software.
+
+
+
+
+ Back
+
+
+
+
+ keyboardq
+
+
+ Keyboard Model
+
+
+
+
+ Pick your preferred keyboard model or use the default one based on the detected hardware
+
+
+
+
+ Refresh
+
+
+
+
+
+ Layouts
+
+
+
+
+
+ Keyboard Layout
+
+
+
+
+ Models
+
+
+
+
+ Variants
+
+
+
+
+ Test your keyboard
+
+
+
+
+ notesqml
+
+
+ <h3>%1</h3>
+ <p>These are example release notes.</p>
+
+
+
+
+ release_notes
+
+
+ <h3>%1</h3>
+ <p>This an example QML file, showing options in RichText with Flickable content.</p>
+
+ <p>QML with RichText can use HTML tags, Flickable content is useful for touchscreens.</p>
+
+ <p><b>This is bold text</b></p>
+ <p><i>This is italic text</i></p>
+ <p><u>This is underlined text</u></p>
+ <p><center>This text will be center-aligned.</center></p>
+ <p><s>This is strikethrough</s></p>
+
+ <p>Code example:
+ <code>ls -l /home</code></p>
+
+ <p><b>Lists:</b></p>
+ <ul>
+ <li>Intel CPU systems</li>
+ <li>AMD CPU systems</li>
+ </ul>
+
+ <p>The vertical scrollbar is adjustable, current width set to 10.</p>
+
+
+
+
+ Back
+
+
+
+
+ welcomeq
+
+
+ <h3>Welcome to the %1 <quote>%2</quote> installer</h3>
+ <p>This program will ask you some questions and set up %1 on your computer.</p>
+
+
+
+
+ About
+
+
+
+
+ Support
+
+
+
+
+ Known issues
+
+
+
+
+ Release notes
+
+
+
+
+ Donate
+
+
+
+
diff --git a/lang/calamares_hi.ts b/lang/calamares_hi.ts
index 60121a630..2d47397e6 100644
--- a/lang/calamares_hi.ts
+++ b/lang/calamares_hi.ts
@@ -16,7 +16,7 @@
This system was started with a <strong>BIOS</strong> boot environment.<br><br>To configure startup from a BIOS environment, this installer must install a boot loader, like <strong>GRUB</strong>, either at the beginning of a partition or on the <strong>Master Boot Record</strong> near the beginning of the partition table (preferred). This is automatic, unless you choose manual partitioning, in which case you must set it up on your own.
- यह सिस्टम <strong>BIOS</strong>बूट वातावरण के साथ शुरू किया गया।<br><br>BIOS वातावरण से स्टार्टअप विन्यस्त करने के लिए इंस्टॉलर को <strong>GRUB</strong> जैसे बूट लोडर को, या तो विभाजन की शुरुआत में या फिर <strong>मास्टर बूट रिकॉर्ड</strong> पर विभाजन तालिका की शुरुआत में इंस्टॉल (सुझाया जाता है) करना होगा। यह स्वत: होता है, परंतु अगर आप मैनुअल विभाजन करना चुनते है; तो आपको इसे खुद ही बनाना होगा।
+ यह सिस्टम <strong>BIOS</strong>बूट वातावरण के साथ शुरू किया गया।<br><br>BIOS वातावरण से स्टार्टअप विन्यस्त करने के लिए इंस्टॉलर को <strong>GRUB</strong> जैसे बूट लोडर को, या तो विभाजन की शुरुआत में या फिर <strong>Master Boot Record</strong> पर विभाजन तालिका की शुरुआत में इंस्टॉल (सुझाया जाता है) करना होगा। यह स्वत: होता है, परंतु अगर आप मैनुअल विभाजन करना चुनते है; तो आपको इसे खुद ही बनाना होगा।
@@ -65,7 +65,7 @@
GlobalStorage
- ग्लोबल स्टोरेज
+ GlobalStorage
@@ -80,7 +80,7 @@
Type:
- प्रकार :
+ प्रकार
@@ -111,7 +111,7 @@
Debug information
- डीबग जानकारी
+ डीबग संबंधी जानकारी
@@ -145,7 +145,7 @@
Done
- पूर्ण हुआ
+ पूर्ण
@@ -161,7 +161,7 @@
Run command '%1' in target system.
- लक्षित सिस्टम में कमांड '%1' चलाएँ।
+ लक्षित सिस्टम पर कमांड '%1' चलाएँ।
@@ -189,17 +189,17 @@
Working directory %1 for python job %2 is not readable.
- पाइथन कार्य %2 के लिए कार्यरत डायरेक्टरी %1 रीड करने योग्य नहीं है।
+ पाइथन कार्य %2 हेतु कार्यरत डायरेक्टरी %1 रीड योग्य नहीं है।Bad main script file
- ख़राब मुख्य स्क्रिप्ट फ़ाइल
+ गलत मुख्य स्क्रिप्ट फ़ाइलMain script file %1 for python job %2 is not readable.
- पाइथन कार्य %2 हेतु मुख्य स्क्रिप्ट फ़ाइल %1 रीड करने योग्य नहीं है।
+ पाइथन कार्य %2 हेतु मुख्य स्क्रिप्ट फ़ाइल %1 रीड योग्य नहीं है।
@@ -212,17 +212,17 @@
Loading ...
-
+ लोड हो रहा है ...QML Step <i>%1</i>.
-
+ QML चरण <i>%1</i>।Loading failed.
-
+ लोड करना विफल रहा।
@@ -259,12 +259,12 @@
Installation Failed
- इंस्टॉल विफल रहा
+ इंस्टॉल विफल रहा।Would you like to paste the install log to the web?
-
+ क्या आप इंस्टॉल प्रक्रिया की लॉग फ़ाइल इंटरनेट पर पेस्ट करना चाहेंगे ?
@@ -291,12 +291,12 @@
Install Log Paste URL
-
+ इंस्टॉल प्रक्रिया की लॉग फ़ाइल पेस्ट करेंThe upload was unsuccessful. No web-paste was done.
- अपलोड असफल रहा। कोई वेब-पेस्ट नही किया गया।
+ अपलोड विफल रहा। इंटरनेट पर पेस्ट नहीं हो सका।
@@ -331,7 +331,7 @@
The %1 installer is about to make changes to your disk in order to install %2.<br/><strong>You will not be able to undo these changes.</strong>
- %2 इंस्टॉल करने हेतु %1 इंस्टॉलर आपकी डिस्क में बदलाव करने वाला है।<br/><strong>आप इन बदलावों को पूर्ववत नहीं कर पाएंगे।</strong>
+ %2 इंस्टॉल करने के लिए %1 इंस्टॉलर आपकी डिस्क में बदलाव करने वाला है।<br/><strong>आप इन बदलावों को पूर्ववत नहीं कर पाएंगे।</strong>
@@ -428,7 +428,7 @@ The installer will quit and all changes will be lost.
Unknown exception type
- अपवाद का प्रकार अज्ञात
+ अपवाद का प्रकार अज्ञात है
@@ -443,7 +443,7 @@ The installer will quit and all changes will be lost.
Unfetchable Python error.
- पहुँच से बाहर पाइथन त्रुटि।
+ अप्राप्य पाइथन त्रुटि।
@@ -452,7 +452,8 @@ The installer will quit and all changes will be lost.
Install log posted to:
%1
-
+ इंस्टॉल प्रक्रिया की लॉग फ़ाइल, यहाँ पेस्ट की गई :
+%1
@@ -460,7 +461,7 @@ The installer will quit and all changes will be lost.
Show debug information
- डीबग जानकारी दिखाएँ
+ डीबग संबंधी जानकारी दिखाएँ
@@ -519,12 +520,12 @@ The installer will quit and all changes will be lost.
After:
- बाद में :
+ बाद में:<strong>Manual partitioning</strong><br/>You can create or resize partitions yourself. Having a GPT partition table and <strong>fat32 512Mb /boot partition is a must for UEFI installs</strong>, either use an existing without formatting or create one.
-
+ <strong>मैनुअल विभाजन</strong><br/>आप स्वयं भी विभाजन बना व उनका आकार बदल सकते है। UEFI इंस्टॉल के लिए GPT विभाजन तालिका और <strong>fat32 512Mb का /boot विभाजन होना जरूरी है</strong>, या तो पहले से मौजूद को ही बिना फॉर्मेट किए इस्तेमाल करें या फिर नया बनाएँ।
@@ -534,7 +535,7 @@ The installer will quit and all changes will be lost.
<strong>Select a partition to shrink, then drag the bottom bar to resize</strong>
- <strong>छोटा करने हेतु विभाजन चुनें, फिर नीचे bar से उसका आकर सेट करें</strong>
+ <strong>छोटा करने के लिए विभाजन चुनें, फिर नीचे bar से उसका आकर सेट करें</strong>
@@ -544,12 +545,12 @@ The installer will quit and all changes will be lost.
Boot loader location:
- बूट लोडर का स्थान :
+ बूट लोडर का स्थान:<strong>Select a partition to install on</strong>
- <strong>इंस्टॉल हेतु विभाजन चुनें</strong>
+ <strong>इंस्टॉल के लिए विभाजन चुनें</strong>
@@ -651,7 +652,7 @@ The installer will quit and all changes will be lost.
Cleared all mounts for %1
- %1 हेतु सभी माउंट हटा दिए गए
+ %1 के लिए सभी माउंट हटा दिए गए
@@ -726,7 +727,7 @@ The installer will quit and all changes will be lost.
Network Installation. (Disabled: Incorrect configuration)
-
+ नेटवर्क इंस्टॉल। (निष्क्रिय : गलत विन्यास)
@@ -736,7 +737,7 @@ The installer will quit and all changes will be lost.
Network Installation. (Disabled: internal error)
-
+ नेटवर्क इंस्टॉल। (निष्क्रिय : आंतरिक त्रुटि)
@@ -746,27 +747,27 @@ The installer will quit and all changes will be lost.
This computer does not satisfy the minimum requirements for setting up %1.<br/>Setup cannot continue. <a href="#details">Details...</a>
- यह कंप्यूटर %1 को सेटअप करने की न्यूनतम आवश्यकताओं को पूरा नहीं करता।<br/>सेटअप जारी नहीं रखा जा सकता।<a href="#details">विवरण...</a>
+ यह कंप्यूटर %1 सेटअप करने की न्यूनतम आवश्यकताओं को पूरा नहीं करता।<br/>सेटअप जारी नहीं रखा जा सकता।<a href="#details">विवरण...</a>This computer does not satisfy the minimum requirements for installing %1.<br/>Installation cannot continue. <a href="#details">Details...</a>
- यह कंप्यूटर %1 को इंस्टॉल करने की न्यूनतम आवश्यकताओं को पूरा नहीं करता।<br/>इंस्टॉल जारी नहीं रखा जा सकता।<a href="#details">विवरण...</a>
+ यह कंप्यूटर %1 इंस्टॉल करने की न्यूनतम आवश्यकताओं को पूरा नहीं करता।<br/>इंस्टॉल जारी नहीं रखा जा सकता।<a href="#details">विवरण...</a>This computer does not satisfy some of the recommended requirements for setting up %1.<br/>Setup can continue, but some features might be disabled.
- यह कंप्यूटर %1 को सेटअप करने हेतु सुझाई गई आवश्यकताओं को पूरा नहीं करता।<br/>सेटअप जारी रखा जा सकता है, लेकिन कुछ विशेषताएँ को निष्क्रिय किया जा सकता हैं।
+ यह कंप्यूटर %1 सेटअप करने हेतु सुझाई गई आवश्यकताओं को पूरा नहीं करता।<br/>सेटअप जारी रखा जा सकता है, लेकिन कुछ विशेषताएँ निष्क्रिय कर दी जाएँगी।This computer does not satisfy some of the recommended requirements for installing %1.<br/>Installation can continue, but some features might be disabled.
- यह कंप्यूटर %1 को इंस्टॉल करने हेतु सुझाई गई आवश्यकताओं को पूरा नहीं करता।<br/>इंस्टॉल जारी रखा जा सकता है, लेकिन कुछ विशेषताएँ को निष्क्रिय किया जा सकता हैं।
+ यह कंप्यूटर %1 इंस्टॉल करने हेतु सुझाई गई आवश्यकताओं को पूरा नहीं करता।<br/>इंस्टॉल जारी रखा जा सकता है, लेकिन कुछ विशेषताएँ निष्क्रिय कर दी जाएँगी।This program will ask you some questions and set up %2 on your computer.
- यह प्रोग्राम एक प्रश्नावली के आधार पर आपके कंप्यूटर पर %2 को सेट करेगा।
+ यह प्रोग्राम प्रश्नावली के माध्यम से आपके कंप्यूटर पर %2 को सेट करेगा।
@@ -781,7 +782,7 @@ The installer will quit and all changes will be lost.
<h1>Welcome to the Calamares installer for %1.</h1>
- <h1>%1 के लिए Calamares इंस्टॉलर में आपका स्वागत है।</h1>
+ <h1>%1 हेतु Calamares इंस्टॉलर में आपका स्वागत है।</h1>
@@ -992,7 +993,7 @@ The installer will quit and all changes will be lost.
Create Volume Group
- वॉल्यूम समूह बनाएँ
+ वॉल्यूम समूह बनाएं
@@ -1397,7 +1398,7 @@ The installer will quit and all changes will be lost.
is running the installer as an administrator (root)
-
+ इंस्टॉलर को प्रबंधक(रुट) के अंतर्गत चला रहा है
@@ -1412,7 +1413,7 @@ The installer will quit and all changes will be lost.
has a screen large enough to show the whole installer
-
+ स्क्रीन का माप इंस्टॉलर को पूर्णतया प्रदर्शित करने में सक्षम हो
@@ -1563,7 +1564,7 @@ The installer will quit and all changes will be lost.
<h1>License Agreement</h1>
-
+ <h1>लाइसेंस अनुबंध</h1>
@@ -1573,27 +1574,27 @@ The installer will quit and all changes will be lost.
Please review the End User License Agreements (EULAs).
-
+ कृपया लक्षित उपयोक्ता लाइसेंस अनुबंधों (EULAs) की समीक्षा करें।This setup procedure will install proprietary software that is subject to licensing terms.
-
+ यह सेटअप प्रक्रिया लाइसेंस शर्तों के अधीन अमुक्त सॉफ्टवेयर को इंस्टॉल करेगी।If you do not agree with the terms, the setup procedure cannot continue.
-
+ यदि आप शर्तों से असहमत है, तो सेटअप प्रक्रिया जारी नहीं रखी जा सकती।This setup procedure can install proprietary software that is subject to licensing terms in order to provide additional features and enhance the user experience.
-
+ यह सेटअप प्रक्रिया अतिरिक्त सुविधाएँ प्रदान करने व उपयोक्ता अनुभव में वृद्धि हेतु लाइसेंस शर्तों के अधीन अमुक्त सॉफ्टवेयर को इंस्टॉल कर सकती है।If you do not agree with the terms, proprietary software will not be installed, and open source alternatives will be used instead.
-
+ यदि आप शर्तों से असहमत है, तो अमुक्त सॉफ्टवेयर इंस्टाल नहीं किया जाएगा व उनके मुक्त विकल्प उपयोग किए जाएँगे।
@@ -1609,7 +1610,7 @@ The installer will quit and all changes will be lost.
URL: %1
-
+ यूआरएल : %1
@@ -1646,7 +1647,7 @@ The installer will quit and all changes will be lost.
File: %1
-
+ फ़ाइल : %1
@@ -1656,12 +1657,12 @@ The installer will quit and all changes will be lost.
Show the license text
-
+ लाइसेंस लेख दिखाएँOpen license agreement in browser.
-
+ लाइसेंस अनुबंध को ब्राउज़र में खोलें।
@@ -1719,35 +1720,35 @@ The installer will quit and all changes will be lost.
Configuring LUKS key file.
- LUKS कुंजी फाइल विन्यस्त करना।
+ LUKS कुंजी फ़ाइल विन्यस्त करना।No partitions are defined.
- कोई विभाजन परिभाषित नहीं हैं।
+ कोई विभाजन परिभाषित नहीं है।Encrypted rootfs setup error
- एन्क्रिप्टेड rootfs सेटअप में त्रुटि
+ एन्क्रिप्टेड रुट फ़ाइल सिस्टम सेटअप करने में त्रुटिRoot partition %1 is LUKS but no passphrase has been set.
- रूट विभाजन %1 LUKS है, लेकिन कोई कूटशब्द सेट नहीं किया गया है।
+ रुट विभाजन %1, LUKS है परंतु कोई कूटशब्द सेट नहीं है।Could not create LUKS key file for root partition %1.
- रूट विभाजन %1 हेतु LUKS कुंजी फाइल बनाने में विफल।
+ रुट विभाजन %1 हेतु LUKS कुंजी फ़ाइल बनाई नहीं जा सकी।Could not configure LUKS key file on partition %1.
-
+ विभाजन %1 हेतु LUKS कुंजी फ़ाइल विन्यस्त नहीं हो सकी।
@@ -1755,7 +1756,7 @@ The installer will quit and all changes will be lost.
Generate machine-id.
- मशीन-आईडी उत्पन्न करना।
+ मशीन-आईडी उत्पन्न करें।
@@ -1765,7 +1766,7 @@ The installer will quit and all changes will be lost.
No root mount point is set for MachineId.
-
+ मशीन-आईडी हेतु कोई रुट माउंट पॉइंट सेट नहीं है।
@@ -1779,92 +1780,92 @@ The installer will quit and all changes will be lost.
Office software
-
+ ऑफिस सॉफ्टवेयरOffice package
-
+ ऑफिस पैकेजBrowser software
-
+ ब्राउज़र सॉफ्टवेयरBrowser package
-
+ ब्राउज़र पैकेजWeb browser
-
+ वेब ब्राउज़रKernel
-
+ कर्नेलServices
-
+ सेवाएँLogin
-
+ लॉगिनDesktop
-
+ डेस्कटॉपApplications
-
+ अनुप्रयोगCommunication
-
+ संचारDevelopment
-
+ सॉफ्टवेयर विकासOffice
-
+ ऑफिसMultimedia
-
+ मल्टीमीडियाInternet
-
+ इंटरनेटTheming
-
+ थीमGaming
-
+ खेलUtilities
-
+ साधन
@@ -1872,7 +1873,7 @@ The installer will quit and all changes will be lost.
Notes
-
+ नोट्स
@@ -1911,17 +1912,17 @@ The installer will quit and all changes will be lost.
Password is too short
- कूटशब्द काफ़ी छोटा है
+ कूटशब्द बहुत छोटा हैPassword is too long
- कूटशब्द काफ़ी लंबा है
+ कूटशब्द बहुत लंबा हैPassword is too weak
- कूटशब्द काफ़ी कमज़ोर है
+ कूटशब्द बहुत कमज़ोर है
@@ -2016,7 +2017,7 @@ The installer will quit and all changes will be lost.
The password is too short
- कूटशब्द काफ़ी छोटा है
+ कूटशब्द बहुत छोटा है
@@ -2076,7 +2077,7 @@ The installer will quit and all changes will be lost.
Password generation failed - required entropy too low for settings
- कूटशब्द बनाना विफल रहा - सेटिंग्स के लिए आवश्यक एन्ट्रापी काफ़ी कम है
+ कूटशब्द बनाना विफल रहा - सेटिंग्स के लिए आवश्यक entropy बहुत कम है
@@ -2151,7 +2152,7 @@ The installer will quit and all changes will be lost.
Password is empty
- पासवर्ड खाली है
+ कूटशब्द रिक्त है
@@ -2164,7 +2165,7 @@ The installer will quit and all changes will be lost.
Product Name
- उत्पाद का नाम
+ वस्तु का नाम
@@ -2174,7 +2175,7 @@ The installer will quit and all changes will be lost.
Long Product Description
- लंबा उत्पाद विवरण
+ वस्तु का विस्तृत विवरण
@@ -2184,7 +2185,7 @@ The installer will quit and all changes will be lost.
Please pick a product from the list. The selected product will be installed.
- कृप्या सूची से उत्पाद का चुनाव करें। चयनित उत्पाद इंस्टॉल किया जायेगा।
+ सूची में से वस्तु विशेष का चयन करें। चयनित वस्तु इंस्टॉल कर दी जाएगी।
@@ -2241,7 +2242,7 @@ The installer will quit and all changes will be lost.
Your Full Name
- आपका पूरा नाम
+ आपके पूरा नाम
@@ -2266,18 +2267,18 @@ The installer will quit and all changes will be lost.
Computer Name
- कंप्यूटर का नाम
+ कंप्यूटर का नामChoose a password to keep your account safe.
- अपना अकाउंट सुरक्षित रखने हेतु कूटशब्द चुनें।
+ अपना अकाउंट सुरक्षित रखने के लिए पासवर्ड चुनें ।<small>Enter the same password twice, so that it can be checked for typing errors. A good password will contain a mixture of letters, numbers and punctuation, should be at least eight characters long, and should be changed at regular intervals.</small>
- <small>एक ही कूटशब्द दो बार दर्ज़ करें, ताकि उसे टाइप त्रुटि के लिए जांचा जा सके। एक उचित कूटशब्द में अक्षर, अंक व विराम चिन्हों का मेल होता है, उसमें कम-से-कम आठ अक्षर होने चाहिए, और उसे नियमित अंतराल पर बदलते रहना चाहिए।</small>
+ <small>एक ही कूटशब्द दो बार दर्ज़ करें, ताकि उसे टाइप त्रुटि के लिए जांचा जा सके । एक अच्छे कूटशब्द में अक्षर, अंक व विराम चिन्हों का मेल होता है, उसमें कम-से-कम आठ अक्षर होने चाहिए, और उसे नियमित अंतराल पर बदलते रहना चाहिए।</small>
@@ -2289,22 +2290,22 @@ The installer will quit and all changes will be lost.
Repeat Password
- कूटशब्द दोबारा दर्ज करें
+ कूटशब्द पुनः दर्ज करेंWhen this box is checked, password-strength checking is done and you will not be able to use a weak password.
- डब्बे को चिह्नित करने पर पासवर्ड की मज़बूती की जांच होगी ओर आप कमज़ोर पासवर्ड उपयोग नही कर पाएँगे।
+ यह बॉक्स टिक करने के परिणाम स्वरुप कूटशब्द-क्षमता की जाँच होगी व आप कमज़ोर कूटशब्द उपयोग नहीं कर पाएंगे।Require strong passwords.
- मज़बूत पासवर्डस की आवश्यकता।
+ मज़बूत कूटशब्द आवश्यक हैं।Log in automatically without asking for the password.
- कूटशब्द पूछे बिना स्वतः लॉग इन करें।
+ कूटशब्द बिना पूछे ही स्वतः लॉग इन करें।
@@ -2314,7 +2315,7 @@ The installer will quit and all changes will be lost.
Choose a password for the administrator account.
- प्रबंधक अकाउंट हेतु कूटशब्द चुनें।
+ प्रबंधक अकाउंट के लिए कूटशब्द चुनें।
@@ -2373,7 +2374,7 @@ The installer will quit and all changes will be lost.
Free Space
- रिक्त स्पेस
+ खाली स्पेस
@@ -2412,7 +2413,7 @@ The installer will quit and all changes will be lost.
Storage de&vice:
- स्टोरेज डिवाइस (&v):
+ डिवाइस (&v):
@@ -2545,7 +2546,7 @@ The installer will quit and all changes will be lost.
After:
- बाद में :
+ बाद में:
@@ -2555,12 +2556,12 @@ The installer will quit and all changes will be lost.
An EFI system partition is necessary to start %1.<br/><br/>To configure an EFI system partition, go back and select or create a FAT32 filesystem with the <strong>%3</strong> flag enabled and mount point <strong>%2</strong>.<br/><br/>You can continue without setting up an EFI system partition but your system may fail to start.
-
+ %1 आरंभ करने हेतु EFI सिस्टम विभाजन ज़रूरी है।<br/><br/>EFI सिस्टम विभाजन को विन्यस्त करने के लिए, वापस जाएँ और चुनें या बनाएँ एक FAT32 फ़ाइल सिस्टम जिस पर <strong>%3</strong> flag चालू हो व माउंट पॉइंट <strong>%2</strong>हो।<br/><br/>आप बिना सेट करें भी आगे बढ़ सकते है पर सिस्टम चालू नहीं होगा।An EFI system partition is necessary to start %1.<br/><br/>A partition was configured with mount point <strong>%2</strong> but its <strong>%3</strong> flag is not set.<br/>To set the flag, go back and edit the partition.<br/><br/>You can continue without setting the flag but your system may fail to start.
-
+ %1 को शुरू करने हेतु EFI सिस्टम विभाजन ज़रूरी है।<br/><br/>विभाजन को माउंट पॉइंट <strong>%2</strong> के साथ विन्यस्त किया गया परंतु उसका <strong>%3</strong> फ्लैग सेट नहीं था।<br/> फ्लैग सेट करने के लिए, वापस जाएँ और विभाजन को edit करें।<br/><br/>आप बिना सेट करें भी आगे बढ़ सकते है पर सिस्टम चालू नहीं होगा।
@@ -2570,12 +2571,12 @@ The installer will quit and all changes will be lost.
Option to use GPT on BIOS
-
+ BIOS पर GPT उपयोग करने के लिए विकल्पA GPT partition table is the best option for all systems. This installer supports such a setup for BIOS systems too.<br/><br/>To configure a GPT partition table on BIOS, (if not done so already) go back and set the partition table to GPT, next create a 8 MB unformatted partition with the <strong>bios_grub</strong> flag enabled.<br/><br/>An unformatted 8 MB partition is necessary to start %1 on a BIOS system with GPT.
-
+ GPT विभाजन तालिका सभी सिस्टम हेतु सबसे उत्तम विकल्प है। यह इंस्टॉलर BIOS सिस्टम के सेटअप को भी समर्थन करता है। <br/><br/>BIOS पर GPT विभाजन तालिका को विन्यस्त करने हेतु, (अगर अब तक नहीं करा है तो) वापस जाकर विभाजन तालिका GPT पर सेट करें, फिर एक 8 MB का बिना फॉर्मेट हुआ विभाजन बनाए जिस पर <strong>bios_grub</strong> का flag हो।<br/><br/>यह बिना फॉर्मेट हुआ 8 MB का विभाजन %1 को BIOS सिस्टम पर GPT के साथ शुरू करने के लिए आवश्यक है।
@@ -2595,7 +2596,7 @@ The installer will quit and all changes will be lost.
There are no partitions to install on.
-
+ इंस्टॉल हेतु कोई विभाजन नहीं हैं।
@@ -2671,7 +2672,7 @@ There was no output from the command.
Output:
-आउटपुट :
+आउटपुट:
@@ -2774,27 +2775,27 @@ Output:
File not found
- फाइल नहीं मिली
+ फ़ाइल नहीं मिलीPath <pre>%1</pre> must be an absolute path.
-
+ फ़ाइल पथ <pre>%1</pre> निरपेक्ष होना चाहिए।Could not create new random file <pre>%1</pre>.
-
+ नवीन यादृच्छिक फ़ाइल <pre>%1</pre>नहीं बनाई जा सकी।No product
- कोई उत्पाद नहीं
+ कोई वस्तु नहींNo description provided.
- कोई विवरण मौजूद नहीं
+ कोई विवरण प्रदान नहीं किया गया।
@@ -2844,7 +2845,7 @@ Output:
Select where to install %1.<br/><font color="red">Warning: </font>this will delete all files on the selected partition.
- चुनें कि %1 को कहाँ इंस्टॉल करना है।<br/><font color="red">चेतावनी : </font> यह चयनित विभाजन पर मौजूद सभी फ़ाइलों को हटा देगा।
+ चुनें कि %1 को कहाँ इंस्टॉल करना है।<br/><font color="red">चेतावनी: </font> यह चयनित विभाजन पर मौजूद सभी फ़ाइलों को हटा देगा।
@@ -2854,7 +2855,7 @@ Output:
%1 cannot be installed on empty space. Please select an existing partition.
- %1 को खाली स्पेस पर इंस्टॉल नहीं किया जा सकता। कृपया कोई मौजूदा विभाजन चुनें।
+ %1 को खाली स्पेस पर इंस्टॉल नहीं किया जा सकता।कृपया कोई मौजूदा विभाजन चुनें।
@@ -2884,7 +2885,7 @@ Output:
<strong>%4</strong><br/><br/>The partition %1 is too small for %2. Please select a partition with capacity at least %3 GiB.
- <strong>%4</strong><br/><br/>%2 के लिए विभाजन %1 काफ़ी छोटा है। कृपया कम-से-कम %3 GiB की क्षमता वाला कोई विभाजन चुनें।
+ <strong>%4</strong><br/><br/>%2 के लिए विभाजन %1 बहुत छोटा है।कृपया कम-से-कम %3 GiB की क्षमता वाला कोई विभाजन चुनें ।
@@ -2906,7 +2907,7 @@ Output:
EFI system partition:
- EFI सिस्टम विभाजन :
+ EFI सिस्टम विभाजन:
@@ -3260,7 +3261,7 @@ Output:
Cannot set password for user %1.
- उपयोक्ता %1 हेतु पासवर्ड सेट नहीं किया जा सकता।
+ उपयोक्ता %1 के लिए पासवर्ड सेट नहीं किया जा सकता।
@@ -3298,12 +3299,12 @@ Output:
Cannot set timezone,
- समय क्षेत्र सेट नहीं हो सका,
+ समय क्षेत्र सेट नहीं हो सका।Cannot open /etc/timezone for writing
- राइट करने हेतु /etc /timezone खोला नहीं जा सका
+ राइट करने हेतु /etc /timezone खोला नहीं जा सका।
@@ -3462,32 +3463,32 @@ Output:
Your username is too long.
- आपका उपयोक्ता नाम काफ़ी लंबा है।
+ आपका उपयोक्ता नाम बहुत लंबा है।Your username must start with a lowercase letter or underscore.
-
+ आपके उपयोक्ता नाम का आरंभ lowercase अक्षर या अंडरस्कोर(_) से ही होना चाहिए।Only lowercase letters, numbers, underscore and hyphen are allowed.
-
+ केवल lowercase अक्षर, अंक, अंडरस्कोर(_) व हाइफ़न(-) का उपयोग ही मान्य है।Your hostname is too short.
- आपका होस्ट नाम काफ़ी छोटा है।
+ आपका होस्ट नाम बहुत छोटा है।Your hostname is too long.
- आपका होस्ट नाम काफ़ी लंबा है।
+ आपका होस्ट नाम बहुत लंबा है।Only letters, numbers, underscore and hyphen are allowed.
-
+ केवल अक्षर, अंक, अंडरस्कोर(_) व हाइफ़न(-) का उपयोग ही मान्य है।
@@ -3508,12 +3509,12 @@ Output:
Key
-
+ कुंजीValue
-
+ मान
@@ -3521,7 +3522,7 @@ Output:
Create Volume Group
- वॉल्यूम समूह बनाएँ
+ वॉल्यूम समूह बनाएं
@@ -3580,7 +3581,7 @@ Output:
Select application and system language
- ऐप्लिकेशन व सिस्टम भाषा चुनें
+ अनुप्रयोग व सिस्टम भाषा चुनें
@@ -3590,17 +3591,17 @@ Output:
Open donations website
- दान करने की वेबसाइट खोलें
+ दान हेतु वेबसाइट खोलें&Donate
- &दान करें
+ दान करें (&D)Open help and support website
- मदद व सहायता की वेबसाइट खोलें
+ सहायता हेतु वेबसाइट खोलें
@@ -3620,7 +3621,7 @@ Output:
Open release notes website
-
+ प्रकाशन नोट्स हेतु वेबसाइट खोलें
@@ -3665,7 +3666,7 @@ Output:
<h1>%1</h1><br/><strong>%2<br/>for %3</strong><br/><br/>Copyright 2014-2017 Teo Mrnjavac <teo@kde.org><br/>Copyright 2017-2020 Adriaan de Groot <groot@kde.org><br/>Thanks to <a href="https://calamares.io/team/">the Calamares team</a> and the <a href="https://www.transifex.com/calamares/calamares/">Calamares translators team</a>.<br/><br/><a href="https://calamares.io/">Calamares</a> development is sponsored by <br/><a href="http://www.blue-systems.com/">Blue Systems</a> - Liberating Software.
-
+ <h1>%1</h1><br/><strong>%2<br/>के लिए %3</strong><br/><br/>प्रतिलिप्याधिकार 2014-2017 Teo Mrnjavac <teo@kde.org><br/>प्रतिलिप्याधिकार 2017-2020 Adriaan de Groot <groot@kde.org><br/><a href="https://calamares.io/team/">Calamares टीम</a> व <a href="https://www.transifex.com/calamares/calamares/">Calamares अनुवादक टीम</a> का धन्यवाद।<br/><br/><a href="https://calamares.io/">Calamares</a> का विकास <br/><a href="http://www.blue-systems.com/">ब्लू सिस्टम्स</a> - लिब्रेटिंग सॉफ्टवेयर द्वारा प्रायोजित है।
@@ -3700,12 +3701,23 @@ Output:
development is sponsored by <br/>
<a href='http://www.blue-systems.com/'>Blue Systems</a> -
Liberating Software.
-
+ <h1>%1</h1><br/>
+ <strong>%2<br/>
+ के लिए %3</strong><br/><br/>
+ प्रतिलिप्याधिकार 2014-2017 Teo Mrnjavac <teo@kde.org><br/>
+ प्रतिलिप्याधिकार 2017-2020 Adriaan de Groot <groot@kde.org><br/>
+ <a href='https://calamares.io/team/'>the Calamares टीम</a>
+ व <a href='https://www.transifex.com/calamares/calamares/'>Calamares
+ अनुवादक टीम</a>को धन्यवाद।<br/><br/>
+ <a href='https://calamares.io/'>Calamares</a>
+ का विकास <br/>
+ <a href='http://www.blue-systems.com/'>ब्लू सिस्टम्स</a> -
+ लिब्रेटिंग सॉफ्टवेयर द्वारा प्रायोजित है।Back
-
+ वापस
@@ -3713,44 +3725,44 @@ Output:
Keyboard Model
-
+ कुंजीपटल मॉडलPick your preferred keyboard model or use the default one based on the detected hardware
-
+ अपना कुंजीपटल मॉडल चुनें या फिर हार्डवेयर आधारित डिफ़ॉल्ट मॉडल उपयोग करेंRefresh
-
+ रिफ्रेश करेंLayouts
-
+ अभिन्यासKeyboard Layout
-
+ कुंजीपटल अभिन्यासModels
-
+ मॉडलVariants
-
+ भिन्न रूपTest your keyboard
-
+ अपना कुंजीपटल जाँचें
@@ -3759,7 +3771,8 @@ Output:
<h3>%1</h3>
<p>These are example release notes.</p>
-
+ <h3>%1</h3>
+ <p>ये उदाहरण रिलीज़ नोट्स हैं।</p>
@@ -3787,12 +3800,32 @@ Output:
</ul>
<p>The vertical scrollbar is adjustable, current width set to 10.</p>
-
+ <h3>%1</h3>
+ <p>यह एक उदाहरण QML फ़ाइल है, जो फ्लिक योग्य सामग्री युक्त रिच टेक्स्ट के विकल्प प्रदर्शित करती है।</p>
+
+ <p>रिच टेक्स्ट के साथ QML एचटीएमएल टैग उपयोग कर सकता है, फ्लिक योग्य सामग्री टचस्क्रीन में उपयोगी होती है।</p>
+
+ <p><b>यह बोल्ड टेक्स्ट है</b></p>
+ <p><i>यह तिरछा टेक्स्ट है</i></p>
+ <p><u>यह रेखांकित टेक्स्ट है</u></p>
+ <p><center>यह टेक्स्ट केंद्र-संरेखित होगा।</center></p>
+ <p><s>यह स्ट्राइकथ्रू है</s></p>
+
+ <p>कोड उदाहरण :
+ <code>ls -l /home</code></p>
+
+ <p><b>सूचियाँ :</b></p>
+ <ul>
+ <li>इंटेल सीपीयू सिस्टम</li>
+ <li>एएमडी सीपीयू सिस्टम</li>
+ </ul>
+
+ <p>ऊर्ध्वाधर स्क्रॉलबार समायोज्य है, वर्तमान चौड़ाई 10 पर सेट है।</p>Back
-
+ वापस
@@ -3801,32 +3834,33 @@ Output:
<h3>Welcome to the %1 <quote>%2</quote> installer</h3>
<p>This program will ask you some questions and set up %1 on your computer.</p>
-
+ <h3>%1 <quote>%2</quote>इंस्टॉलर में आपका स्वागत है</h3>
+ <p>यह प्रोग्राम प्रश्नावली के माध्यम से आपके कंप्यूटर पर %1 को सेट करेगा।</p>About
-
+ बारे मेंSupport
-
+ सहायताKnown issues
-
+ ज्ञात समस्याएँRelease notes
-
+ रिलीज़ नोट्सDonate
-
+ दान करें